--- title: "Authenticate with token" slug: "authenticate-with-token-2" updated: 2026-09-12T18:55:55Z published: 2026-09-12T18:55:55Z canonical: "docs.trellix.com/authenticate-with-token-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Authenticate with token Use this task to authenticate with a token to enable recovery tasks. The DETech tool requires either token authentication (password or smartcard as mentioned in the [KB79787](https://thrive.trellix.com/s/article/KB79787)) from an assigned user or a recovery file (.XML) exported from the ePO - On-prem console. Make sure that you have the DETech WinPE recovery boot disk. 1. Make sure that the system’s main power supply is plugged in. Do not attempt to perform this task on battery power only. 2. Boot the system with the **DETech WinPE boot disc**. This loads the **Drive Encryption** interface. 3. At the command prompt, enter these commands to open the DETech window: **`cd\`** **`cd Program Files\Drive Encryption`** **`EETech.exe`** or **`EEOpalTech.exe`** 4. Under **Authentication**, click **Token**. A logon page prompts you to enter the Drive Encryption credentials for the system. 5. Enter the username and password for the client system, then click **Logon**. When the correct credentials are provided, the **Authentication** status changes to **Authenticated with Token**. :