--- title: "Checking system health using the CLI" slug: "checking-system-health-using-the-cli" tags: ["Product Usage", "CMS 11.x", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Network Security"] updated: 2026-08-24T18:57:01Z published: 2026-08-24T18:57:01Z canonical: "docs.trellix.com/checking-system-health-using-the-cli" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Checking system health using the CLI Use the CLI commands in this topic to view health and status information about Email Security - Server appliance components. This topic describes selected commands that return system, hardware status, DTI network, and interface information. For a full list of commands and details about their usage and parameters, see the *CLI Command Reference*. - Monitor, Operator, or Admin access - Admin access for the `show ipmi` command > [!NOTE] > Note > > The examples in this section are from a Network Security appliance, but they are representative of Trellix appliances as well. **To check appliance health:** 1. Go to CLI enable mode: ``` hostname > enable ``` 2. Display detailed information about the system and the software running on it. ``` hostname # show version Product name:      Web MPS [licensed] Product model:     FireEyeNX9450 Product edition:   Classic Bandwidth:         2000 Mb Product release:   wMPS (wMPS) 7.7.0.433916 Build ID:          #433916 Build date:        2015-12-29 17:21:57 Build arch:        x86_64 Built by:          root@vta114 Version summary:   wmps wMPS (wMPS) 7.7.0.433916 #433916 2015-12-29 17:21:57 x86_64 build@vta108:FireEye (xxx) Content Version:   385.314 Appliance ID:      XXXXXXXXXXXX ``` ``` Product model:     FireEyeNX9450 Host ID:           XXXXXXXXXXX System serial num: XXXXXXXXXX System UUID:       XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX ``` ``` Uptime:            3d 6h 34m 34.205s CPU load averages: 0.36 / 0.40 / .38 Number of CPUs:    32 System memory:     9210 MB used / 119984 MB free / 129194 MB total Swap:              0 MB used / 65536 MB free / 65536 MB total ``` 3. Display the IPMI configuration: ``` hostname # show ipmi IPMI LAN Settings ---------------------------------------- Admin Shut Down         : no Shut Down               : no IP Address Source       : Static Address IP Address              : 192.168.42.27 Subnet Mask             : 0 Default Gateway IP      : 0 ``` ``` IPMI Firmware Installed ------------------------------- Firmware Version:         2.67 Device:                   1 IPMI Version:             2.0 ``` ``` IPMI Firmware Available For Update ----------------------------------- New Firmware Version:     2.67 New Firmware Filename:    FireEye_V267.bin Firmware Update Notice:   Firmware is up to date for this release IPMI Firmware Availability Notice is enabled ``` 4. Display overall system status: ``` hostname * show system health Overall system feature status: Good ``` 5. Display current status of system and available services: ``` hostname # show show health all ``` ``` Health Status: ``` ``` Last Updated at: : 2019-11-06T20:31:00 ``` ``` Service:        : System CPU/Memory/Disk IO Health ``` ``` Health Status:  : Healthy ``` ``` Details:        : Healthy ``` ``` Service:        : Global Cache ``` ``` Health Status:  : Healthy ``` ``` Details:        : Healthy ``` 6. Display information about the Dynamic Threat Intelligence (DTI) network: ``` hostname # show fenet status ``` ``` Dynamic Threat Intelligence Service: ``` ```    Update source   :    Enabled         : yes      Download        : DTIUser@cloud.fireeye.com      Upload          : DTIUser@up-cloud.fireeye.com    Mil             : DTIUser@mil-cloud.fireeye.com  HTTP Proxy: ``` ```     Address        :     Username       :     User-agent     : ``` ``` Request Session: ``` ```     Timeout        : 30       Retries        : 3     Speed Time     : 60     Max Time       : 14400     Rate Limit     :     Speed Limit    : 1   Dynamic Threat Intelligence Lockdown: ``` ``` Enabled             : no Locked              : no Lock After          : 5 failed attempts ``` ``` UPDATES                    Enabled   Notify  Scheduled   Last Updated At                    -------   ------  ---------   ------------------- Security contents: yes       no      every       2016/07/18 19:28:00 Stats contents:    yes               none        2016/07/18 15:55:00 ``` 7. Display status and traffic statistics for all interfaces: ``` hostname # show interfaces ``` ``` Interface ether1 status:   Comment:   Admin up:           yes   Link up:            yes   DHCP running:       no   IP address:         172.00.00.00     Netmask:            255.000.0.0   IPV6 enabled:       no   Speed:              1000Mb/s (auto)     Duplex:             full (auto)   Interface type:     ethernet   Interface ifindex:  12     Interface source:   physical   MTU:                1500   HW address:         00:25:90:D0:A3:76 ``` ```  RX bytes:        3114981133   TX bytes:       227921679   RX packets:       31934013     TX packets:     367951   RX mcast packets: 31564        TX discards:    0   RX discards:      296          TX errors:      0   RX errors:        1            TX overruns:    0   RX overruns:      0            TX carrier:     0   RX frame:         0            TX collisions:  0                                    TX queue len:   1000 ``` ``` Interface ether2 status:   Comment:   Admin up:           yes   Link up:            no   DHCP running:       no   IP address:               Netmask:   IPV6 enabled:       no               Speed:              UNKNOWN     Duplex:             UNKNOWN   Interface type:     ethernet   MTU:                1500   HW address:         00:25:90:D0:A3:77   RX bytes:           0              TX bytes:       0   RX packets:         0              TX packets:     0   RX mcast packets:   0              TX discards:    0   RX discards:        0              TX errors:      0   RX errors:          0              TX overruns:    0   RX overruns:        0              TX carrier:     0   RX frame:           0              TX collisions:  0                                        TX queue len:   0 ``` ``` Interface pether2 status:   Comment:   Admin up:           yes   Link up:            no   DHCP running:       no   IP address:   Netmask:   IPV6 enabled:       no   Speed:              UNKNOWN   Duplex:             UNKNOWN   Interface type:     ethernet   Interface ifindex:  9   Interface source:   physical   Bridge group:       ether2   MTU:                1500   HW address:         00:25:90:D0:A3:77     RX bytes:           0            TX bytes:       0   RX packets:         0            TX packets:     0   RX mcast packets:   0            TX discards:    0   RX discards:        0            TX errors:      0   RX errors:          0            TX overruns:    0   RX overruns:        0            TX carrier:     0   RX frame:           0            TX collisions:  0                                      TX queue len:   1000 ``` ``` Interface pether3 status:   Comment:   Admin up:           yes   Link up:            yes   DHCP running:       no   IP address:         127.0.0.10   Netmask:            255.255.255.0   IPV6 enabled:       no   Speed:              1000 MB/s (auto)   Duplex:             full (auto)   Interface type:     ethernet   Interface ifindex:  6   Interface source:   physical   MTU:                1500   HW address:         00:25:90:D0:A3:67     RX bytes:           31628620500   TX bytes:       0   RX packets:         46795         TX packets:     0   RX mcast packets:   367056        TX discards:    0   RX discards:        212322        TX errors:      0   RX errors:          0             TX overruns:    0   RX overruns:        0             TX carrier:     0   RX frame:           0             TX collisions:  0       TX queue len:   1000 ```