--- title: "Configure a DFS path for evidence storage" slug: "configure-a-dfs-path-for-evidence-storage" tags: ["Product Usage", "DLP 11.14.x"] updated: 2026-09-01T07:30:45Z published: 2026-09-01T07:30:45Z canonical: "docs.trellix.com/configure-a-dfs-path-for-evidence-storage" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure a DFS path for evidence storage For Trellix Data Loss Prevention you must specify a network share to store evidence files. You can use a Distributed File System (DFS) path as the SMB (UNC) network share for more flexible and resilient storage management. Before you begin, ensure you have a DFS namespace and folder configured with the necessary permissions for the evidence share account Follow these steps to configure the DFS path in Trellix® ePolicy Orchestrator - On-prem. 1. In the main menu, go to the **Data Protection** → **DLP Settings page**. 2. Under the **Shared Storage** section, complete the following: - For **Shared storage location**, select **SMB (UNC)**. - In the **Path** field, enter the full DFS network share path. - Provide the required credentials and click Test Credentials to verify the connection. 3. Click **Save**. 4. Apply the setting to the DLP policy. - From the Trellix ePO - On-prem menu, select **Policy**, then click **Policy Catalog**. - From the **Product** drop-down list, select **Data Loss Prevention**. - Select the policy you need to modify. - Click the **Shared Storage and Evidence** tab. - Configure the same DFS path that you entered in the **DLP Settings**. - Click **Save**. 5. Apply the updated policy to your client systems. ### Verify the configuration After you apply the policy, verify that evidence is being stored correctly. 1. On a client system where the policy is active, trigger a rule that generates an incident. 2. Verify the evidence file is accessible from the **DLP Incident Manager**. - From the Trellix ePO - On-prem menu, select **Data Protection**, then click **DLP Incident Manager**. - Locate the incident you generated. - From the **Actions** menu, download the evidence file. 3. Verify the evidence file exists on the DFS share by navigating to the DFS path and confirming that the correct evidence folder and file have been created.