--- title: "Configure general appliance settings" slug: "configure-general-appliance-settings" tags: ["Product Usage", "DLP 11.12.x"] updated: 2026-09-09T08:08:14Z published: 2026-09-09T08:08:14Z canonical: "docs.trellix.com/configure-general-appliance-settings" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure general appliance settings Configure settings to be applied to several appliances from a single page. > [!NOTE] > Note > > You must configure at least one DNS server. The **Save** button is not enabled until you enter a DNS server address. You do not need to configure all other areas of this page; set up only the settings that you want applied to your appliances. 1. From **Policy Catalog** → **Common Appliance Management** → **General** → ****, configure **Date and Time**: 1. Select your required time zone from the drop-down list. 2. Select **Enable NTP**. 3. To define a Network Time Protocol (NTP) server, click the ![GUID-3F0CB1B9-B84D-4E0B-AD10-4C36AC527A2C-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-fe630315-d1b9-dd2e-9c62-fcfa43aa2d90(4).png?sv=2026-02-06&spr=https&st=2026-11-22T17%3A27%3A04Z&se=2026-11-22T18%3A27%3A04Z&sr=c&sp=r&sig=OfNSGh%2FaqRP3fajvUAI4%2BRjF7IQJyzzAFxHB61qahFE%3D) icon. 4. Enter the server details. 5. Click **Update**. 2. Configure DNS settings: 1. To enter DNS server details, click the ![GUID-3F0CB1B9-B84D-4E0B-AD10-4C36AC527A2C-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-fe630315-d1b9-dd2e-9c62-fcfa43aa2d90(4).png?sv=2026-02-06&spr=https&st=2026-11-22T17%3A27%3A04Z&se=2026-11-22T18%3A27%3A04Z&sr=c&sp=r&sig=OfNSGh%2FaqRP3fajvUAI4%2BRjF7IQJyzzAFxHB61qahFE%3D) icon. 2. Enter the server details. 3. Click **Update**. 3. Configure static routing settings: 1. To enter static routing information, click the ![GUID-3F0CB1B9-B84D-4E0B-AD10-4C36AC527A2C-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-fe630315-d1b9-dd2e-9c62-fcfa43aa2d90(4).png?sv=2026-02-06&spr=https&st=2026-11-22T17%3A27%3A04Z&se=2026-11-22T18%3A27%3A04Z&sr=c&sp=r&sig=OfNSGh%2FaqRP3fajvUAI4%2BRjF7IQJyzzAFxHB61qahFE%3D) icon. 2. Enter the route details. 3. Click **Update**. 4. Configure SSH settings: 1. Select your required option from the drop-down list. 2. If you select **Allow remote login from these hosts only**, click the ![GUID-3F0CB1B9-B84D-4E0B-AD10-4C36AC527A2C-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-fe630315-d1b9-dd2e-9c62-fcfa43aa2d90(4).png?sv=2026-02-06&spr=https&st=2026-11-22T17%3A27%3A04Z&se=2026-11-22T18%3A27%3A04Z&sr=c&sp=r&sig=OfNSGh%2FaqRP3fajvUAI4%2BRjF7IQJyzzAFxHB61qahFE%3D) icon. 3. Enter the host address. 4. Click **Update**. 5. Configure logging settings: 1. To enable remote logging, select **Store log data remotely**. 2. To define a syslog server, click the ![GUID-3F0CB1B9-B84D-4E0B-AD10-4C36AC527A2C-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-fe630315-d1b9-dd2e-9c62-fcfa43aa2d90(4).png?sv=2026-02-06&spr=https&st=2026-11-22T17%3A27%3A04Z&se=2026-11-22T18%3A27%3A04Z&sr=c&sp=r&sig=OfNSGh%2FaqRP3fajvUAI4%2BRjF7IQJyzzAFxHB61qahFE%3D) icon. 3. Enter the syslog server address or domain. 4. Select the protocol information. 5. Enter the port. 6. Click **Update**. 6. Click **Save** to add the configured settings to the **Policy Catalog** in ePO - On-prem.