--- title: "Configure jumbo frame size in hardware appliances" slug: "configure-jumbo-frame-size-in-hardware-appliances" tags: ["DLPNM 11.11.x", "Install and Get Started"] updated: 2026-11-20T21:40:50Z published: 2026-11-20T21:40:50Z canonical: "docs.trellix.com/configure-jumbo-frame-size-in-hardware-appliances" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure jumbo frame size in hardware appliances The monitor interface of the capture port 1 (used for packet acquisition) in the Trellix DLP Network Monitor appliance supports parsing jumbo frames that are used in local area networks. By default, parsing the jumbo frames is disabled in the hardware appliances. To configure the jumbo frame size for hardware appliances, specify the MTU size for the `JumboFrameSize` parameter. For details about enabling JUMBO frames and entering valid MTU size values, see [KB94711](https://support.trellix.com/s/article/KB94711).