--- title: "Configure the network information in ePO - On-prem" slug: "configure-the-network-information-in-epo-on-prem" tags: ["Install and Get Started", "DLPNP 11.11.x"] updated: 2026-09-01T07:30:45Z published: 2026-09-01T07:30:45Z canonical: "docs.trellix.com/configure-the-network-information-in-epo-on-prem" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure the network information in ePO - On-prem Configure the network information in ePO - On-prem to connect the appliance to the network. Download and install **Appliance Management** and **DLP Appliance Management** extensions. To connect to the network, configure the DNS server, NTP server, and a Smart Host for your appliances in ePO - On-prem. > [!NOTE] > Note > > The DNS server details must be configured in ePO - On-prem before registering the appliance with ePO - On-prem. The DNS information entered in the Setup Wizard is overwritten by the DNS information entered in this configuration task upon connecting to ePO - On-prem. 1. In ePO - On-prem, browse to **Menu** → **Policy** → **Policy Catalog**. 2. From the **Product** drop-down list, select **Common Appliance Management**. 3. Select the **My Default** policy. 4. Add the DNS server and the NTP server, then click **Save**. 5. From the **Product** drop-down list, select **DLP Appliance Management**. 6. Select the **My Default** policy for **Trellix DLP - Prevent Email Settings**. 7. Enter the IP address of the Smart Host, then click **Save**.