--- title: "Configure the RMM from appliance console" slug: "configure-the-rmm-from-appliance-console" tags: ["Install and Get Started", "DLPNP 11.11.x"] updated: 2026-09-01T07:28:51Z published: 2026-09-01T07:28:51Z canonical: "docs.trellix.com/configure-the-rmm-from-appliance-console" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure the RMM from appliance console You can use the RMM via the appliance console to manage a hardware appliance. The RMM enables you to configure the network settings and protocols. Use the administrator account and password to log on to the appliance using RMM. 1. Log on to the appliance as administrator. 2. From the appliance console menu, select **Configure the BMC**. 3. Configure the network information: 1. Select **Configure the address**. 2. Type the IP address, the network mask, and the optional gateway. Use the up and down arrows to navigate between options. 3. Press **Enter** or select **OK** to save the changes. 4. Configure the allowed protocols: 1. Select **Configure remote protocols**. 2. Press spacebar to enable or disable an option. 3. Press **Enter** or select **OK** to save the changes.