--- title: "Configure the RMM from BIOS for Trellix DLP 7700 and Trellix DLP 6600" slug: "configure-the-rmm-from-bios-for-trellix-dlp-7700-and-trellix-dlp-6600" tags: ["Hardware", "DLPNP 11.10.x", "DLPNP 11.11.x"] updated: 2026-09-02T05:55:47Z published: 2026-09-02T05:55:47Z canonical: "docs.trellix.com/configure-the-rmm-from-bios-for-trellix-dlp-7700-and-trellix-dlp-6600" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure the RMM from BIOS for Trellix DLP 7700 and Trellix DLP 6600 Make sure that the server board has the latest BIOS firmware. Trellix publishes BIOS images for the appliance that contain the BMC firmware. Contact Technical Support for the latest version of the firmware. Downloading and using the system firmware from other sources might impact the appliance performance. You can enable or configure RMM from the text menu system, appliance console, serial console, or SSH session. > [!NOTE] > Note > > In an uninstalled appliance, you can configure the RMM settings from BIOS using the root account. In an installed appliance, you can configure the RMM settings from the appliance console without entering the BIOS. 1. Log on to the appliance as administrator. 2. From the appliance console menu, select **Reboot** to restart the system. 3. Before the operating system boots, press **F2** to enter the BIOS. 4. To configure the BMC LAN configuration for your appliance model, navigate to **Server Management** → **BMC LAN Configuration** and press **Enter**. 5. Scroll down to **Intel® RMM4 IPv4 LAN Configuration** and configure **IP source**, **IP address**, **Subnet mask** as needed. 6. Scroll down to **User Configuration**, then configure these settings: - **User ID** — Select **root** - **User status** — Select **Enabled** - **User name** — Enter `root` - **User password** — Enter the password twice. 7. Confirm the network and user information, and press **F10** to save and exit the BIOS. The appliance boots with the new settings. 8. On the computer that connects to the RMM, open a web browser and enter: `https://RMM IP address` Use the credentials `root`/password you entered in the earlier step. The appliance boots with the new settings. For more information about Intel® RMM4, go to [https://www.intel.in/content/www/in/en/support/articles/000006023/server-products.html](https://www.intel.in/content/www/in/en/support/articles/000006023/server-products.html).