--- title: "Configure the RMM from BIOS for Trellix DLP 8800" slug: "configure-the-rmm-from-bios-for-trellix-dlp-8800-5" tags: ["DLPNP 11.10.x", "Hardware"] updated: 2026-09-30T17:57:45Z published: 2026-09-30T17:57:45Z canonical: "docs.trellix.com/configure-the-rmm-from-bios-for-trellix-dlp-8800-5" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure the RMM from BIOS for Trellix DLP 8800 Make sure that the server board has the latest BIOS firmware. Trellix publishes BIOS images for the appliance that contain the BMC firmware. Contact Technical Support for the latest version of the firmware. Downloading and using the system firmware from other sources might impact the appliance performance. To assign or to change IP in the remote management module (BMC) for the Trellix DLP 8800 appliance: 1. Log on to the appliance via console or SSH as a **root** user. 2. To get the current BMC configuration in `bmc-cfg.xml`, run: ` "/opt/sum/sum -c GetBmcCfg --file bmc-cfg.xml"` 3. Open and edit the `bmc-cfg.xml` file to update **IP Source**, **IP Address**, **SubNet Mask**, **Default GateWay Address**, and **DNS Address** fields using: ` vi bmc-cfg.xml` 4. To update the BMC configuration, run: `"/opt/sum/sum -c ChangeBmcCfg --file bmc-cfg.xml"` ``` Static xx.xxx.xx.xx 255.255.248.0 xx.xxx.yy.yyy xx.xxx.nn.nn ``` :