--- title: "Configuring a Domain with Multiple Next-Hop IP Addresses Using the Web UI" slug: "configuring-a-domain-with-multiple-next-hop-ip-addresses-using-the-web-ui" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-08-24T19:53:02Z published: 2026-08-24T19:53:02Z canonical: "docs.trellix.com/configuring-a-domain-with-multiple-next-hop-ip-addresses-using-the-web-ui" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring a Domain with Multiple Next-Hop IP Addresses Using the Web UI This procedure describes how to use the **Settings > Email MTA** page to configure a domain and next‑hop IP addresses. ### Restrictions - TLS Delivery Mode can be set to None, Opportunistic, or Mandatory. The Verify delivery mode does not support domains that forward to multiple MTA hosts. - A domain can support up to five next-hop addresses. - The total of the weighting values assigned to the next-hop entries must equal 100. ### Prerequisites - An established connection between the appliance and the Internet. - You are logged in to the appliance Web UI as an Admin or Operator. **To configure a single domain with multiple next-hop IP addresses:** 1. Go to the **Settings > Email MTA** page. 2. In the Add Domain and Next‑Hop section, enter a domain name in the **Domain** text box. 3. If you want to enable email for all subdomains of the specified domain, click the **Include Subdomains** checkbox. 4. In the **TLS Delivery Mode** field, select the mode that the MTA uses to deliver email. 5. (Optional) To configure the MTA to use DNS MX record translation on the next-hop IP address, select the **Enable Next-Hop MX Lookup** check box. 6. In the **Next-Hop** column of the table entry, enter the IP address of the next-hop appliance. 7. In the **Weight%** column of the table entry, enter a weighting value. This value specifies the percentage of the outbound connections that need to go to that MTA. 8. To add another next-hop MTA IP address, click the **Add Additional Next‑Hop** link and repeat the previous two steps. 9. After all next-hop entries have been defined for the domain, verify that the total of the weighting values you entered in the Weight% column is 100. 10. Click **Add**. 11. To verify your configuration changes, check the new entry that appears in the Current Domain and Next-Hop table.