--- title: "Configuring a domain with next-hop failover using the Web UI" slug: "configuring-a-domain-with-next-hop-failover-using-the-web-ui" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-08-24T19:53:10Z published: 2026-08-24T19:53:10Z canonical: "docs.trellix.com/configuring-a-domain-with-next-hop-failover-using-the-web-ui" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring a domain with next-hop failover using the Web UI An MTA domain can be configured to fail over to another domain if an unrecoverable failure occurs. This procedure describes how to use the **Settings > Email MTA** page to configure a default failover MTA next-hop domain for email analysis. ### Prerequisites - An established connection between the Email Security - Server appliance and the Internet. - You are logged in to the Email Security - Server appliance Web UI as an Admin or Operator. **To configure an MTA next hop fail over domain:** 1. Go to the **Settings > Email MTA** page. 2. Scroll down to the **Domain and Next‑Hop** section. 3. Enter an IP or Domain address for the next-hop MTA failover domain in the **Next-hop Failover** field. 4. Click **ADD**. 5. To verify your configuration changes, check the **Next-hop Failover** column in the **Current Domain and Next-Hop** table.