--- title: "Configuring event notifications using the CLI" slug: "configuring-event-notifications-using-the-cli" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] status: "update" updated: 2026-09-09T07:53:31Z published: 2026-09-09T07:53:34Z canonical: "docs.trellix.com/configuring-event-notifications-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring event notifications using the CLI ### Prerequisites - The Email Security - Server appliance must have an established connection to the Internet. - You must have Admin or Operator access to the Email Security - Server appliance. ###### Configuring event notifications Use the CLI commands in this topic to configure event notifications. **To configure event notifications using the CLI:** 1. Enable the CLI configuration mode: ```plaintext hostname > enable hostname # configure terminal ``` 2. Check which protocols are already enabled: ```plaintext hostname (config) # show fenotify email hostname (config) # show fenotify http hostname (config) # show fenotify rsyslog hostname (config) # show fenotify snmp ``` 3. Configure the protocols that you want to use: - [Email](/data-and-email/docs/configuring-email-notifications-using-the-cli) - [HTTP](https://docs-be.trellix.com/bundle/ex_11.x_ug/page/filepaligotmpfireeye64663c676a3d2ex100ugcontenttopicsnotifyexhttpnotificationclihtm) - [Rsyslog](/data-and-email/docs/configuring-rsyslog-notifications-using-the-cli) - [SNMP](/data-and-email/docs/configuring-snmp-notifications-using-the-cli) 4. Confirm that the protocols are configured correctly: ```plaintext hostname (config) # show fenotify email hostname (config) # show fenotify http hostname (config) # show fenotify rsyslog hostname (config) # show fenotify snmp ``` 5. Enable the notifications. By default, notifications are enabled. This command only affects notifications for enabled protocols. If a protocol has been disabled, you must enable the protocol before enabling notifications. ```plaintext hostname (config) # fenotify enable ``` 6. Send a test email message to all enabled recipients: ```plaintext hostname (config) # fenotify email send-test ``` 7. Save the configuration: ```plaintext hostname (config) # write memory ```