--- title: "Configuring the minimum transport layer security version using the CLI" slug: "configuring-the-minimum-transport-layer-security-version-using-the-cli" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-08-24T19:53:10Z published: 2026-08-24T19:53:10Z canonical: "docs.trellix.com/configuring-the-minimum-transport-layer-security-version-using-the-cli" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring the minimum transport layer security version using the CLI Use the CLI commands in this procedure to configure the minimum TLS version that is used to establish a connection to accept emails or securely send emails over a TLS connection on the Email Security - Server appliance. > [!NOTE] > Note > > You can configure the minimum TLS version only using the CLI. ### Prerequisites - An established connection between the Email Security - Server appliance and the Internet. - You are logged in to the Email Security - Server appliance CLI as an Admin or Operator. **To configure the minimum TLS version:** 1. Go to CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Specify the minimum version of the TLS protocol. - To set the TLS minimum version to SSLv3 or higher, enter: ``` hostname (config) #  email-analysis tls min-version ssl3 ``` - To set the TLS minimum version to TLSv1 or higher, enter: ``` hostname (config) #  email-analysis tls min-version tls1 ``` > [!NOTE] > Note > > The default is TLSv1.2. - To set the TLS minimum version to TLSv1.1 or higher, enter: ``` hostname (config) #  email-analysis tls min-version tls1.1 ``` - To set the TLS minimum version to TLSv1.2 or higher, enter: ``` hostname (config) #  email-analysis tls min-version tls1.2 ``` 3. Verify the minimum version of the TLS protocol. ``` hostname (config) # show email-analysis ``` ``` Email-Analysis: ``` ```  enabled:                   yes ``` ```  mode:                      monitor ``` ```  interface:                 pether3 ``` ```  TLS receive mode:          none ``` ```  TLS default deliv. mode:   none ``` ```  MTA certificate name:      system-self-signed ``` ```  Password-protected objs:   yes ``` ```  cipher list:               compatible ``` ```          minimum protocol version:  tls1       ``` ```  Controlled-live-mode enabled: no ``` ```  URL dynamic analysis enabled: yes ``` ```  . ``` ```  . ``` ```  . ``` The "minimum protocol version" line displays the TLS protocol version. 4. Save your changes. `hostname (config) # write memory`