--- title: "Connect Capture port 1 to your network in VMware virtual environment" slug: "connect-capture-port-1-to-your-network-in-vmware-virtual-environment-1" tags: ["DLPNM – SaaS", "SaaS", "Install and Get Started"] updated: 2026-09-01T09:27:59Z published: 2026-09-01T09:27:59Z canonical: "docs.trellix.com/connect-capture-port-1-to-your-network-in-vmware-virtual-environment-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Connect Capture port 1 to your network in VMware virtual environment On a VMware virtual appliance, the capture port is connected to a standard virtual switch or a portgroup on a distributed switch with promiscuous mode enabled. See [https://kb.vmware.com/s/article/1004099](https://kb.vmware.com/s/article/1004099) for more information. 1. Log on to the VMware vSphere host using the VSphere Client. 2. Select the VMware vSphere host in the inventory list. 3. Click the **Configuration** tab. 4. In the **Hardware** section, click **Networking**. 5. Select the **Properties** of the virtual switch that you want to enable promiscuous mode on. 6. Select the virtual switch or portgroup you want to modify and click **Edit**. 7. Click the **Security** tab. 8. From the **Promiscuous Mode** menu, click **Accept**.