--- title: "Connecting capture port 1 to your network" slug: "connecting-capture-port-1-to-your-network-2" tags: ["DLPNM – SaaS", "SaaS", "Install and Get Started"] updated: 2026-09-01T09:27:59Z published: 2026-09-01T09:27:59Z canonical: "docs.trellix.com/connecting-capture-port-1-to-your-network-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Connecting capture port 1 to your network It is required to integrate the Trellix DLP Network Monitor – SaaS appliance into your network using a SPAN port or network tap. Enable the *promiscuous mode* on a portgroup or virtual switch to allow the appliance to passively inspect copies of all network packets that pass through the network. - On physical appliance, the capture port can be connected to a SPAN port or a network tap. - On a virtual appliance, the capture port is connected to a standard virtual switch or a portgroup on a distributed switch with the promiscuous mode enabled.