--- title: "Create DETech for UEFI (Standalone) bootable USB" slug: "create-detech-for-uefi-standalone-bootable-usb" updated: 2026-09-12T18:55:48Z published: 2026-09-12T18:55:48Z canonical: "docs.trellix.com/create-detech-for-uefi-standalone-bootable-usb" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Create DETech for UEFI (Standalone) bootable USB Trellix DETech for UEFI (Standalone) is a disaster recovery tool that allows the administrator to perform normal recovery functions. It enhances the user experience with a simplified process of creating the DETech boot disk. You can create the boot disk by running a simple command from the command prompt. Make sure that you have a Universal Serial Bus (USB) drive/port in your computer and a USB memory stick. 1. Extract **EETech.zip** and place the **Standalone** folder in the desired location. 2. Insert the USB memory stick and format it using this command: `C:\>format 'volume': /FS:FAT32 /V:EETech` Make sure to replace 'volume' with the drive letter of the USB drive/port. For example, consider the USB drive/port as 'G'. ### Note The right-click format (FAT 32) and quick format (FAT32) do not work on all USB memory sticks or hardware combinations. 3. Create the directory structure "\EFI\Boot" on the USB memory stick. 4. For 32-bit systems, extract **EpeTechEfi32.efi** and copy it to the USB memory stick, renaming it to "\EFI\Boot\BootIA32.efi". For 64-bit systems, extract **EpeTechEfi.efi** and copy it to the USB memory stick, renaming it to "\EFI\Boot\BootX64.efi" (they can both be present on the same USB memory stick). ### Note On the Trellix console, the system property **Firmware Type** indicates whether a particular system is MBR, UEFI 32-bit, or UEFI 64-bit. The bootable USB memory stick is created. The combination of directory and filename must be recognized by the UEFI system allowing it to boot from the USB memory disk. :