--- title: "Default IP addresses" slug: "default-ip-addresses" tags: ["DLPNP 11.10.x", "Hardware"] updated: 2026-11-04T16:46:01Z published: 2026-11-04T16:46:01Z canonical: "docs.trellix.com/default-ip-addresses" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Default IP addresses Use the default IP addresses rather than assigning dynamic IP addresses to configure each appliance. - **LAN 1** — 10.1.1.108/24 Use the LAN 1 network for Trellix DLP Network Prevent SMTP or ICAP traffic. You can also use it for management traffic. - **OOB** — 10.1.3.108/24 (Optional) Use the Out-of-band (OOB) network for management traffic including communication. > [!NOTE] > Note > > If your network uses DHCP, the first IP address that the DHCP server assigns to the appliance is used instead. You can manually configure the IP address from the **Setup Wizard**. The appliance doesn't support using a continuous DHCP configuration. The default gateway for the appliance uses the LAN 1 network. Configure any routing required on the OOB interface using static routes.