--- title: "Deleting the SMTP interface configuration using the CLI" slug: "deleting-the-smtp-interface-configuration-using-the-cli" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-08-24T19:53:10Z published: 2026-08-24T19:53:10Z canonical: "docs.trellix.com/deleting-the-smtp-interface-configuration-using-the-cli" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Deleting the SMTP interface configuration using the CLI Use the CLI commands in this procedure to delete the SMTP (pether3) interface configuration. **To delete the SMTP interface configuration:** 1. Go to CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Delete the specified IPv4 address and mask length for the pether3 interface. `hostname (config) # no interface pether3 ip address` 3. Delete the specified static IPv6 address and mask length for the pether3 interface. `hostname (config) # no interface pether3 ipv6 address <IPv6_address>/<mask_length>` 4. Verify your changes. `hostname (config) # show interface pether3 configured` 5. Save your changes. `hostname (config) # write memory` ### Example This example deletes the specified IPv4 address and mask length for the pether3 interface. `hostname (config) # no interface pether3 ip address` `hostname (config) # show interface pether3 configured` `Interface pether3 configuration:` `Comment:` `Enabled: yes` `DHCP: no` `Zeroconf: no` `IP address:` `Netmask:` `IPv6 enabled: yes` `Autoconf enabled: no` `Autoconf route: yes` `Autoconf privacy: no` `DHCPv6 enabled: no` `IPv6 addresses: 3` `IPv6 address: 2001:470:84a7:1720:20c:bdff:fe04:9f73/5` ```  IPv6 address:   2001:470:84a7:1720:20c:bdff:fe04:9f74/5 ``` ```  IPv6 address:   2001:470:84a7:1720:20c:bdff:fe04:9f75/5 ``` `.....`