--- title: "Deploy the appliance software on a hardware appliance" slug: "deploy-the-appliance-software-on-a-hardware-appliance-2" tags: ["DLPNM – SaaS", "SaaS", "Install and Get Started"] updated: 2026-09-01T09:27:16Z published: 2026-09-01T09:27:16Z canonical: "docs.trellix.com/deploy-the-appliance-software-on-a-hardware-appliance-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Deploy the appliance software on a hardware appliance You can deploy and install on Trellix DLP 8800, Trellix DLP 7700, or Trellix DLP 6600 appliance models based on your usage of the product. > [!TIP] > Tip > > For performance optimization, make sure that all appliances in a cluster are of the same model. You can perform the initial deployment using these methods: - USB drive > [!NOTE] > Note > > Use image writing software, such as Launchpad Image Writer, to write the image to the USB drive. Use the "raw", "DD", or "ISOHybrid" image mode when writing to a USB drive, else the installation might fail. For more information, see [KB87321](https://thrive.trellix.com/s/article/KB87321). - USB CD drive - Virtual CD drive using the RMM 1. Using the installation ISO file, create or set up the external imaging media. 2. Insert or connect the media to the appliance. 3. Turn on or restart the appliance. 4. Before the operating system starts, press **F6** for the boot menu and select the external media. 5. Follow the on-screen prompts. The appliance software is deployed.