--- title: "Deploy the Trellix DLP Network Monitor appliance in Nutanix environment" slug: "deploy-the-trellix-dlp-network-monitor-appliance-in-nutanix-environment" tags: ["Install and Get Started", "DLPNM 11.11.x"] updated: 2026-08-24T14:36:16Z published: 2026-09-01T07:31:42Z canonical: "docs.trellix.com/deploy-the-trellix-dlp-network-monitor-appliance-in-nutanix-environment" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Deploy the Trellix DLP Network Monitor appliance in Nutanix environment You can manually deploy the Trellix DLP Network Monitor virtual appliance in Nutanix environment. > [!TIP] > Tip > > Creating a cluster of Trellix DLP Network Monitor appliances is not supported on the Nutanix platform. **These steps are applicable to Nutanix AVH version 6.5.** Download the **Trellix-MS-.iso** file and save the file on your local system. You can use these steps to create a Standard VM. Use the same steps with appropriate VM size to create other types of VM. 1. Log in to the Nutanix Prism Central web console with administrator privileges. 2. **Add an appliance image file**. 1. Go to **Main Menu** → **Images** and click **Add Image**. Click **+ Add File** and browse to select the .iso file downloaded on your system. 2. In the **Image Source** section, **Image file** and **Type** (ISO) are selected by default. Add the image source with these default options and click **Next**. 3. In the **Select Location** section, the **Placement Method** is selected as **Place image directly on clusters**, by default. Proceed with these default options and click **Save**. After the import of image file is successful, the newly created appliance image is shown in the list of images. 3. **Create a Virtual Machine for deploying the appliance**. Use these recommended values to configure the CPU, memory, and disks as needed to create an appliance: | | CPU | Memory | Disk1 in GB | Disk2 in GB | Disk3 in GB | Disk4 in GB | | --- | --- | --- | --- | --- | --- | --- | | **Standard VM** | 4 | 32 | 10 | 300 | 4 | — | | **Standard VM - Capture** | 4 | 32 | 10 | 300 | 4 | 4000 | | **Small VM*** | 1 | 4 | 10 | 150 | 4 | — | | **Small VM - Capture*** | 1 | 4 | 10 | 150 | 4 | 500 | | **Large VM** | 16 | 64 | 10 | 300 | 4 | — | | **Large VM - Capture** | 16 | 64 | 10 | 300 | 4 | 8000 | > [!NOTE] > Note > > * Use the **Small VM** and **Small VM - Capture** options only for evaluation purpose. 1. Go to **Main Menu** → **VMs** and click **Create VM**. 2. **Configuration** — To configure the VM, enter a name for the virtual machine. In the **VM Properties**, enter the values for **CPU** and **Memory** as needed. Click **Next**. 3. **Resources** — Add all needed disks, CD ROM, and attach the appliance to the subnet. For example, to create a **Standard VM** appliance, attach 3 disks (10 GB, 300 GB, 4 GB) using the **Attach Disk** option in the same order. Click **Attach Disk** and select the **Type** as Disk, **Operation** as **Allocate on Storage Container**, and the **Bus Type** as SCSI. Click **Save**. To use the capture feature, add the fourth disk of size 4000 GB. 4. To create a CD-ROM, click **Attach Disk** again. Select the **Type** as CD-ROM, **Operation** as **Clone from Image**, and select the image that was added as an image in Step 2. Click **Save**. 5. Click **Attach to Subnet** and select the switch in **Subnet** and click **Save** to create the network interfaces. Trellix DLP Network Monitor requires three network interfaces to function as required. In this step, you can create two network interfaces to connect the appliance to the configured switch in your network. These network details are required while updating the **Setup Wizard**. The first interface is the network interface and the second interface is the Out of Band (OOB), which is the management interface. The third network interface is the Capture interface. Create the third network before turning on the appliance. To create the third network interface, follow one of these steps: - If **Nutanix FLOW/Network Manager** is **disabled**, follow Step 4 mentioned below to create the third network. As a prerequisite, create and configure a network function provider using the Nutanix REST API before creating the virtual appliance. This helps to provide the service chain required to redirect all network traffic from a virtual switch to the appliance. For information about creating the network function provider, see [000014057](https://thrive.trellix.com/s/article/000014057?language=en_US). - If **Nutanix FLOW/Network Manager** is **enabled** follow steps in the article [000015385](https://thrive.trellix.com/s/article/000015385) to create and configure the capture port. 6. Select the boot Configuration as **Legacy BIOS Mode** and click **Next**. 7. **Management** — In **Categories**, select the network function provider that you have created and click **Next**. 8. **Review** — Verify the appliance configuration details and click **Create VM**. 4. Before turning on the appliance create the third network interface explicitly, kNetworkFunction NIC from the Nutanix **acli** (command line interface). 1. Log in to the Nutanix cluster Controller Virtual Machine (Controller VM) using the ADMIN credentials: `$ ssh admin@<system IP>` 2. Open the Nutanix command line interface: `$ acli` 3. Create a kTap network function nic interface explicitly using: `<acropolis> vm.nic_create <appliance name> type=kNetworkFunctionNic network_function_nic_type=kTap` Make sure that all three networks are available using the command: `<acropolis> vm.nic_get <appliance name>` > [!NOTE] > Note > > After adding the NIC of type kTap interface, appliance configuration can't be modified from the Nutanix user interface. Any changes to appliance VM can only be made from the acli console. 5. Click the deployed virtual machine, and then click **More** → **Power on** to turn on the appliance and choose to boot from virtual CD. 6. Click **Launch Console**. The virtual appliance console opens and you can continue with the installation of the appliance. For more information about installing the appliance software, see Install the appliance software in Nutanix environment.