--- title: "Deploy the Trellix DLP Network Prevent appliance in Nutanix environment" slug: "deploy-the-trellix-dlp-network-prevent-appliance-in-nutanix-environment" tags: ["Install and Get Started", "DLPNP 11.11.x"] updated: 2026-08-24T18:51:53Z published: 2026-09-01T07:31:42Z canonical: "docs.trellix.com/deploy-the-trellix-dlp-network-prevent-appliance-in-nutanix-environment" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Deploy the Trellix DLP Network Prevent appliance in Nutanix environment You can manually deploy the Trellix DLP Network Prevent virtual appliance in Nutanix environment. > [!TIP] > Tip > > For performance optimization, make sure that all virtual appliances in a cluster have the same specifications. **These steps are applicable to Nutanix AVH version 6.5.** Download the **Trellix-PS-.iso** file and save the file on your local system. Steps to create a Standard VM. You can use the same steps with appropriate VM size to create other types of VM. 1. Log in to the Nutanix Prism Central web console with administrator privileges. 2. **Add an appliance image file** After the import of image file is successful, the newly created appliance image is shown in the list of images. 1. Go to **Main Menu** → **Images** and click **Add Image**. Click **+ Add File** and browse to select the .iso file downloaded on your system. 2. In the **Image Source** section, **Image file** and **Type** (ISO) are selected by default. Add the image source with these default options and click **Next**. 3. In the **Select Location** section, the **Placement Method** is selected as **Place image directly on clusters**, by default. Proceed with these default options and click **Save**. 3. **Create a Virtual Machine for deploying the appliance** Use these recommended values to configure the CPU, memory, and disks needed to create an appliance: | | CPU | Memory | Disk1 in GB | Disk2 in GB | Disk3 in GB | Disk4 in GB | | --- | --- | --- | --- | --- | --- | --- | | **Standard VM** | 4 | 32 | 10 | 300 | 4 | — | | **Standard VM - Capture** | 4 | 32 | 10 | 300 | 4 | 4000 | | **Small VM*** | 1 | 4 | 10 | 150 | 4 | — | | **Small VM - Capture*** | 1 | 4 | 10 | 150 | 4 | 500 | | **Large VM** | 16 | 64 | 10 | 300 | 4 | — | | **Large VM - Capture** | 16 | 64 | 10 | 300 | 4 | 8000 | > [!NOTE] > Note > > * Use the **Small VM** and **Small VM - Capture** options only for evaluation purposes. After the virtual appliance is successfully created, it is shown in the list of VMs. 1. Go to **Main Menu** → **VMs** and click **Create VM**. 2. **Configuration** — To configure the VM, enter a name for the virtual machine. For the **VM Properties**, enter the values for **CPU** and **Memory** as needed. Click **Next**. 3. **Resources** — Add all needed disks, CD ROM, and attach the appliance to the subnet. For example, to create a **Standard VM** appliance, attach 3 disks (10 GB, 300 GB, 4 GB) using the **Attach Disk** option in the same order. Click **Attach Disk** and select the **Type** as Disk, **Operation** as **Allocate on Storage Container**, and the **Bus Type** as SCSI. Click **Save**. To use the capture feature, add the fourth disk of size 4000 GB. 4. To create a CD-ROM, click **Attach Disk** again. Select the **Type** as CD-ROM, **Operation** as **Clone from Image**, and select the image that was added as an image in Step 2. Click **Save**. 5. Create two networks to connect the appliance to the configured switch in your network. Click **Attach to Subnet** and select the switch in **Subnet**. Click **Save**. 6. Boot Configuration is selected as **Legacy BIOS Mode**, by default, continue with the default selection and click **Next**. 7. **Management** — Continue with the default options and click **Next**. 8. **Review** — Verify the appliance configuration details and click **Create VM**. 4. Click the deployed virtual machine, and then click **More** → **Power on** to turn on the appliance. 5. Click **Launch Console**. The virtual appliance console opens and you can continue with the installation of the appliance. For more information about installing the appliance software, see Install the appliance software in Nutanix environment.