--- title: "Enable accessibility in the pre-boot environment" slug: "enable-accessibility-in-the-pre-boot-environment-1" updated: 2026-09-12T18:55:48Z published: 2026-09-12T18:55:48Z canonical: "docs.trellix.com/enable-accessibility-in-the-pre-boot-environment-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enable accessibility in the pre-boot environment Pre-boot interface navigation can be complemented by a series of system audio beeps to ensure that visually-impaired users can successfully authenticate. ### Note Drive Encryption adds 508 compliance system beeps to UEFI. For details, see [KB69853](https://thrive.trellix.com/s/article/KB69853). Task 1. Click Menu → Systems → System Tree, then select a group from the **System Tree**. 2. Select a system, then click Actions → Agent → Modify Policies on a Single System to open the **Policy Assignment** page for that system. 3. From the **Product** drop-down list, select **Drive Encryption 8.x**. The policy categories under **Drive Encryption** display the system's assigned policy. 4. Select the **Product Settings** policy category, then click **Edit Assignments** to open the **Product Settings** page. 5. If the policy is inherited, select **Break inheritance and assign the policy and settings below** next to **Inherit from**. 6. From the **Assigned Policy** drop-down list, select the policy, then click **Edit Policy** to open the **Policy Settings** page. From this page, you can edit the selected policy, or create a new policy. 7. On the **Boot Options** tab, select **Always enable pre-boot USB support** to enable USB on the client system. Make sure that you also enable the **Enable Accessibility** option under **Log On** | **Drive Encryption**. 8. Click **Save** on the **Policy Settings** page, then click **Save** on the **Product Settings** page. 9. Send an agent wake-up call. When the user tries to authenticate on the client system after enforcing this policy, the user can listen to the beep audio guidance in the pre-boot environment. :