--- title: "Enabling automatic license updates using the CLI" slug: "enabling-automatic-license-updates-using-the-cli" tags: ["Product Usage", "CMS 11.x", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Network Security"] updated: 2026-09-18T12:59:01Z published: 2026-09-18T12:59:01Z canonical: "docs.trellix.com/enabling-automatic-license-updates-using-the-cli" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling automatic license updates using the CLI When the license update feature is enabled, license updates are automatic. You can also explicitly update licenses. **To verify and enable automatic license updates:** 1. Go to CLI configuration mode: ```plaintext hostname > enable hostname # configure terminal ``` 2. Verify the license update feature status: ```plaintext hostname (config) # show fenet license fenet License Update Service Licensing service: Administratively enabled Last time licensing service was contacted: 2014/08/11 10:50:04 Last time licensing service was contacted successfully: 2014/08/11 10:50:04 Last time keys from licensing service were applied: 2014/08/07 17:50:03 ``` 3. If the license update feature service is disabled, enable it: ```plaintext hostname (config) # fenet license update enable ``` 4. Save your changes: ```plaintext hostname (config) # write memory ``` > [!NOTE] > Note > > See [Synchronizing the system clock to DTI server time using the CLI](/network-and-platform/docs/synchronizing-the-system-clock-to-dti-server-time-using-the-cli) for an option that prevents potential licensing issues if there is a time gap between the two clocks. **To explicitly update licenses:** 1. Go to CLI configuration mode: ```plaintext hostname > enable hostname # configure terminal ``` 2. Update licenses: ```plaintext hostname (config) # fenet license update ``` 3. Save your changes: ```plaintext hostname (config) # write memory ``` **To disable automatic license updates:** 1. Go to CLI configuration mode: ```plaintext hostname > enable hostname # configure terminal ``` 2. Disable the feature: ```plaintext hostname (config) # no fenet license update enable ``` 3. Save your changes: ```plaintext hostname (config) # write memory ```