--- title: "Enabling embedded analysis using the CLI" slug: "enabling-embedded-analysis-using-the-cli" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-08-24T19:52:57Z published: 2026-08-24T19:52:57Z canonical: "docs.trellix.com/enabling-embedded-analysis-using-the-cli" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling embedded analysis using the CLI Use the CLI commands in this procedure to enable embedded attachment analysis. This command affects analysis of files embedded in attachments only. ### Prerequisites - A connection is established between theEmail Security - Server appliance and the Internet. - You are logged in to the Email Security - Server appliance CLI as an Admin or Operator. - Email attachment scanning is enabled. See [Adding the attachment scan license in the Web UI on](/data-and-email/docs/adding-the-attachment-scan-license-in-the-web-ui) . **To enable the analysis of objects embedded in attachments:** 1. Go to CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Enable the analysis of embedded objects. ``` hostname (config) # embedded-analysis enable ``` 3. Save your changes. ``` hostname (config) # write memory Saving configuration file ... Done! ```