--- title: "Enabling impersonation riskware policy rules" slug: "enabling-impersonation-riskware-policy-rules" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-08-24T19:53:10Z published: 2026-08-24T19:53:10Z canonical: "docs.trellix.com/enabling-impersonation-riskware-policy-rules" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling impersonation riskware policy rules To generate email sender impersonation riskware alerts or block email for senders that match the following high and low impersonation detection rules, you must configure settings using the Web UI or CLI. - `65027, High Confidence Email Impersonation Weights 80-99 Matched` - `65028, Low Confidence Email Impersonation Weights 50-79 Matched` ### Prerequisites - An established connection between the Email Security - Server appliance and the Internet. - You are logged in to the Web UI with Admin and Operator access. **To alert or quarantine impersonation detection rules for low and high confidence using the Web UI:** 1. Go to the **Settings > Riskware Policy** page. 2. In the **Riskware Policy Rules** table, select rule ids 65027 and 65028. 3. Select **Alert Only** or clear **Quarantine**. **To enable impersonation detection rules for low and high confidence using the CLI:** 1. Go to CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Enable an impersonation detection rule for high confidence. `hostname (config) # analysis riskware policy rule 65027 enable` 3. Enable an impersonal detection rule for low confidence. `hostname (config) # analysis riskware policy rule 65028 enable` **To block impersonation detection rules for low and high confidence using the CLI:** 1. Go to CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Block an impersonation detection rule for high confidence. `hostname (config) # analysis riskware policy rule 65027 block` 3. Block an impersonation detection rule for low confidence. `hostname (config) # analysis riskware policy rule 65028 block`