--- title: "Enabling or disabling campaign detection using the CLI" slug: "enabling-or-disabling-campaign-detection-using-the-cli" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-08-24T19:53:10Z published: 2026-08-24T19:53:10Z canonical: "docs.trellix.com/enabling-or-disabling-campaign-detection-using-the-cli" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling campaign detection using the CLI Use the CLI commands in this procedure to enable or disable the campaign detection feature. **To enable campaign detection:** 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Enable the settings for campaign detection. ``` hostname (config) ecd enable ``` 3. Save your changes. ``` hostname (config) # write memory ``` 4. Verify the status for campaign detection. ``` hostname (config) # show ecd status ---- Email Campaign Detection Status ---- Feature enabled : YES Process status : running ``` **To disable campaign detection:** 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Disable campaign detection. ``` hostname (config) # no ecd enable ``` 3. Save your changes. ``` hostname (config) # write memory ``` 4. Verify the status for campaign detection. ``` hostname (config) # show ecd status ---- Email Campaign Detection Status ---- Feature enabled : NO Process status : unmanaged ```