--- title: "Enabling or disabling typosquatting detection using the CLI" slug: "enabling-or-disabling-typosquatting-detection-using-the-cli" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-08-24T19:52:57Z published: 2026-08-24T19:52:57Z canonical: "docs.trellix.com/enabling-or-disabling-typosquatting-detection-using-the-cli" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling typosquatting detection using the CLI Use the CLI commands in this procedure to enable or disable typosquatting detection on the Email Security - Server appliance. After you have configured the Email Security - Server appliance to detect typosquatting using the CLI, you can view analysis of the results on the **eAlerts > Alerts** page. > [!NOTE] > Note > > You can enable or disable typosquatting detection only using the CLI. This feature is enabled by default. > > From Release 8.0, do not use the `show email-analysis policy` command to verify the status for typosquatting detection. ### Prerequisites - Administrator or Operator access to the Email Security - Server appliance - A one-way CONTENT_UPDATES license for security content updates - Validate DTI access on the Email Security - Server appliance by using the `show fenet status` command. For details about how to validate DTI access, refer to the *Email Security — Server System Administration Guide*. - Download and install the latest security content with new typosquatted domains by using the `fenet security-content apply-update` command. For details about how to update security content, refer to the *Email Security — Server System Administration Guide*. Follow these steps to enable or disable typosquatting detection using the CLI. **To enable typosquatting detection:** 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Enable the settings for typosquatting detection on the appliance. ``` hostname (config) analysis url policy typosquatting enable ``` > [!NOTE] > Note > > In Release 8.0, the `email-analysis policy typosquatting enable` command was changed to the `analysis url policy typosquatting enable` command. 3. Save your changes. ``` hostname (config) # write memory ``` 4. Verify the status for typosquatting detection. ``` hostname (config) show analysis url-policy   TypoSquatting:                    yes    .    . ``` **To disable typosquatting detection:** 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Disable typosquatting detection on the appliance. ``` hostname (config) # no analysis url policy typosquatting enable ``` > [!NOTE] > Note > > In Release 8.0, the `no email-analysis policy typosquatting enable` command was changed to the `no analysis url policy typosquatting enable` command. 3. Save your changes. ``` hostname (config) # write memory ``` 4. Verify the status for typosquatting detection. ``` hostname (config) # show analysis url-policy   TypoSquatting:                      no   .   . ```