--- title: "Enabling or disabling URL dynamic analysis using the CLI" slug: "enabling-or-disabling-url-dynamic-analysis-using-the-cli" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-08-24T19:52:57Z published: 2026-08-24T19:52:57Z canonical: "docs.trellix.com/enabling-or-disabling-url-dynamic-analysis-using-the-cli" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling URL dynamic analysis using the CLI Use the CLI commands in this procedure to enable or disable URL Dynamic Analysis. **To enable URL Dynamic Analysis:** 1. Go to CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Enable the settings for URL Dynamic Analysis. ``` hostname (config) # email-analysis url-dynamic-analysis enable ``` 3. Save your changes. ``` hostname (config) # write memory ``` 4. Verify the status for URL Dynamic Analysis. You can also verify the network connectivity settings for the live ether1 or ether2 interface and (if used) the proxy server. ``` hostname (config) # show email-analysis url-dynamic-analysis ``` ``` Email-Analysis url dynamic analysis configuration: ``` `Live Interface: ether2` ```  Feature Enabled: yes ``` ```  Default Gateway: 172.16.1.1 ``` ```  External IP: 172.16.0.0/12 ``` ```  Internal IP: 169.254.100.1/24 ``` ```  Name Server: 172.16.2.1 ``` ```  Http Proxy: 10.10.10.5:8080 ``` ```  Http Proxy Authentication: admin/******** ``` ```  Download Complete Timeout (sec): 120 ``` ```  Download Response Timeout (sec): 30 ``` ```  Download Disable Time (sec): 1500 ``` **To disable URL Dynamic Analysis:** 1. Go to CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Disable URL Dynamic Analysis. ``` hostname (config) # no email-analysis url-dynamic-analysis enable ``` 3. Save your changes. ``` hostname (config) # write memory ``` 4. Verify the status for URL Dynamic Analysis. ``` hostname (config) # show email-analysis url-dynamic-analysis ``` ``` Email-Analysis url dynamic analysis configuration: ``` `Live Interface: ether2` ```  Feature Enabled: no ``` ```   . ``` ```   . ``` ```   . ``` ### URL Client-Side Redirection Detection Configuration CLI commands are available to enable or disable the capability to handle Dynamic URL Analysis detection of client-side URL redirection. - `_debug analysis live client-redirect enable` - `_debug no analysis live client-redirect enable` The client-side redirection feature is enabled by default. This feature can only be implemented with CLI. If any redirections are detected, the resulting URLs are written to a file, where additional Dynamic URL Analysis is performed There is no limit on the number of redirections that can be detected. There is a timeout of five seconds for one redirection and a general timeout after seven seconds.