--- title: "Enabling or disabling URL scanning using the CLI" slug: "enabling-or-disabling-url-scanning-using-the-cli" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-08-24T19:53:02Z published: 2026-08-24T19:53:02Z canonical: "docs.trellix.com/enabling-or-disabling-url-scanning-using-the-cli" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling or disabling URL scanning using the CLI Use the CLI commands in this procedure to enable or disable URL scanning. **To enable URL scanning:** 1. Go to CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Enable the settings for URL scanning. ``` hostname (config) # email-analysis policy url-scan enable ``` 3. Save your changes. ``` hostname (config) # write memory ``` 4. Verify the status of URL scanning. ``` hostname (config) # show email-analysis policy Email-Analysis Policy:  Analyze URLs in body:         yes  Analyze attachments:          yes  Analyze email using YARA:     yes  Email YARA Weight Cap:        30  ..... ``` The `Analyze URLs in body:` line displays `yes` when URL scanning is enabled. **To disable URL scanning:** 1. Go to CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Disable URL scanning. ``` hostname (config) # no email-analysis policy url-scan enable ``` 3. Save your changes. ``` hostname (config) # write memory ``` 4. Verify the status of URL scanning. ``` hostname (config) # show email-analysis policy Email-Analysis Policy:  Analyze URLs in body:         no  Analyze attachments:          yes  Analyze email using YARA:     yes  Email YARA Weight Cap:        30  ..... ``` The `Analyze URLS in body:` line displays `no` when URL scanning is disabled.