--- title: "Enabling the analysis mode" slug: "enabling-the-analysis-mode" tags: ["Product Usage", "CMS 11.x", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Network Security"] updated: 2026-08-21T15:37:39Z published: 2026-08-24T18:57:06Z canonical: "docs.trellix.com/enabling-the-analysis-mode" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling the analysis mode This section describes how to enable each analysis mode. For detailed information about each analysis mode, see the following topics: - [Block Analysis Mode](/data-and-email/docs/block-analysis-mode) - [Monitor Analysis Mode](/data-and-email/docs/monitor-analysis-mode) - [Tap/Span Analysis Mode](/data-and-email/docs/tap-span-analysis-mode) - [Drop Analysis Mode](/data-and-email/docs/drop-analysis-mode) For a quick comparison of the analysis modes, see [Analysis Modes](/data-and-email/docs/analysis-modes). > [!WARNING] > Caution > > You must reboot the appliance after changing to another analysis mode. If you do not reboot, mail will not be delivered to the downstream MTA after you change to Block or Monitor mode, and the SMTP or pether3 interface will not be reset properly after you change to or from Tap/Span mode. **Prerequisites** - Operator or Admin access