--- title: "Enabling the DLP Capture feature" slug: "enabling-the-dlp-capture-feature" tags: ["Product Usage", "DLP 11.12.x"] updated: 2026-09-09T08:08:52Z published: 2026-09-09T08:08:52Z canonical: "docs.trellix.com/enabling-the-dlp-capture-feature" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enabling the DLP Capture feature Use the options in **Trellix DLP Capture Settings** to capture data from Trellix DLP Network and specify how long you want to retain that data for. For the DLP Capture feature to appear in the ePO - On-prem menu, you must add a license for one of the Trellix DLP Network systems. For details about product features, usage, and best practices, click ? or Help. 1. In ePO - On-prem, open the **Policy Catalog**. 2. Select the **DLP Appliance Management** product, select the **Trellix DLP Capture Settings** category, and open the policy that you want to edit. 3. In **Capture Settings**, select **Enable Capture**. 4. (Optional) Specify how long you want to keep captured items for. By default, captured items are removed after 28 days. You can change the limit to a maximum of 1000 days. 5. Click **Save**. 6. (Optional) Check whether the DLP Capture feature is enabled on a specific appliance. 1. Open the **System Tree** and select the **Systems** panel. 2. Click the appliance to open the **Systems: Information** page. 3. Click **Products** and select **DLP Capture**. 4. Scroll down to **General**, and check the value for Capture Feature Status: - 1: feature is enabled - 2: feature is disabled - 3: feature is not supported on this particular platform 3 is normally shown when the Trellix DLP Capture Storage Array needs to be attached and the appliance reimaged.