--- title: "Failure sysdumps max age settings using the CLI" slug: "failure-sysdumps-max-age-settings-using-the-cli" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-08-24T19:53:17Z published: 2026-08-24T19:53:17Z canonical: "docs.trellix.com/failure-sysdumps-max-age-settings-using-the-cli" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Failure sysdumps max age settings using the CLI Use the CLI `pm failure max-sysdumps-age` command to set the maximum days to keep sysdump files. To restore the retention of `sysdumps` default value use the `no` form of this command. ### Prerequisites - Administrator access to the Email Security - Server appliance **To change the number of days to keep sysdump files:** 1. Go to the CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Enter the command `pm failure max-sysdumps-age <number of days>`: ``` hostname (config) # pm failure max-sysdumps-age ``` Example The following command configures the sysdump files to be retained up to 300 days. You can verify the setting with a `show pm` command. You can reset the setting to its default value of 365 days by using the `no pm failure max-sysdumps-age` command. ``` hostname (config) # pm failure max-sysdumps-age 300 ``` ``` hostname (config) # show pm Process launch / shutdown: ... Crash handling: ... Maximum number of sysdumps to allow:    100 Maximum number of days to keep sysdumps:    300 ... Other: ... ```