--- title: "Initial configuration prerequisites" slug: "initial-configuration-prerequisites" tags: ["Product Usage", "CMS 11.x", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Network Security"] updated: 2026-08-24T18:56:48Z published: 2026-08-24T18:56:48Z canonical: "docs.trellix.com/initial-configuration-prerequisites" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Initial configuration prerequisites Before you configure the appliance: - Read the *Release Notes* for the current release. - Collect the following information from your network administrator: - Static IP address, subnet mask, and default gateway address for the appliance management interface. - IP address for each Domain Name System (DNS) server (if DNS name resolution will be used). - IP address for each Network Time Protocol (NTP) server (if NTP synchronization will be used). - Telnet or SSH client on the remote system (if the appliance will be managed remotely). - If you plan to configure initial settings using the serial console port and a Windows or Mac laptop, obtain a USB-to-serial cable. > [!WARNING] > Important > > When planning your network configuration, do not use the following IP address ranges. These are reserved for internal system use, and assigning them to appliance interfaces will cause network conflicts: > > - **192.168.100.x**: Reserved internal IP address range for the Ether 2 interface. This cannot be changed. > - **192.168.200.x**: Reserved IP address range for Docker containers.