--- title: "Installation checklist" slug: "installation-checklist-3" tags: ["Install and Get Started", "DLPNP – SaaS"] updated: 2026-09-01T09:28:07Z published: 2026-09-01T09:28:07Z canonical: "docs.trellix.com/installation-checklist-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Installation checklist Verify that you have all information needed for a successful installation. **Trellix DLP Network Prevent – SaaS considerations for installation** | Determine | Consideration | | --- | --- | | Security | - Use out-of-band management on a network that ePO - SaaS can access to isolate management and network traffic. - LAN 1 traffic must not be accessible from outside your organization. - Connect any baseboard management controller (BMC) interface to a dedicated secure management network. - Logon account — The appliance has a local administrator account for logging on to the appliance console. Change the default administrator password to make the account secure. - Control who can access the physical or virtual appliance console. > [!TIP] > Tip > > Use the encrypted channel for your ICAP traffic. Disable all unused services. | | Network information | - Network interfaces must be assigned with static IP addresses, rather than dynamically assigned IP addresses. - In a cluster environment, the virtual IP address must be in the same subnet as the appliance IP address. - The cluster ID and the virtual IP address must be different from that of any other Trellix DLP Network Monitor – SaaS or Trellix DLP Network Prevent – SaaS cluster, regardless of the management platform. | | Remote Management Module (RMM) | (Hardware appliances only) If you intend to use the RMM for appliance management, use a secure or closed network to connect to the RMM. |