--- title: "Integrate with Web Gateway" slug: "integrate-with-web-gateway-6" tags: ["Product Usage", "DLP 11.11.x", "DLPE 11.11.x", "DLPExtn 11.11.x", "DLPNM 11.11.x", "DLPNP 11.11.x"] updated: 2026-09-01T07:30:39Z published: 2026-09-01T07:30:39Z canonical: "docs.trellix.com/integrate-with-web-gateway-6" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Integrate with Web Gateway You can configure Web Gateway to forward HTTP traffic using ICAP to Trellix DLP Network Prevent for analysis. Trellix DLP Network Prevent returns a response to Web Gateway, allowing or denying the page. > [!NOTE] > Note > > All versions of Web Gateway are supported, but these steps are applicable only for version 7.8.1. The steps can differ slightly for older or newer versions. For the detailed steps in the version of Web Gateway that you have installed, see the Web Gateway documentation. 1. In Web Gateway, select **Policy**. 2. Add the rule set: 1. Click the **Rule Sets** tab. 2. Select **Add** → **Rule Set from Library**. 3. From the **ICAP Client** rule set library, select **ICAP Client**, then click **OK**. 4. Click **Unlock View**, then click **Yes**. 5. Deselect **Responses**. 3. (Optional) If you want the generated incidents to contain the destination IP address, edit the REQMOD settings. 1. On the **Rule Sets** tab, expand the **ICAP Client** rule set and select **ReqMod**. 2. Select **Add X-Server-IP header**. 4. Follow these steps to set the appliance as an ICAP client: 1. Click the **Lists** tab, expand ICAP Server and select **ReqMod Server**. 2. Select **1** and click **Edit**. 3. Type the IP address or the fully qualified domain name of the Trellix DLP Network Prevent appliance, followed by the ICAP mode in the **URI** field. Optionally, you can add a port. If you add no port, the default port 1344 is configured. The syntax for specifying this information is displayed above the field. For example, you can use one of these formats: `icap://xx.xxx.xxx.xx/reqmod` `icap://xx.xxx.xxx.xx:1346/reqmod` `icap://test-icap.micmwg.com/reqmod` `icap://test-icap.micmwg.com:1346/reqmod` 4. Click **OK**. 5. Enable the rule. 1. On the **Rule Sets** tab, select the **ICAP Client** rule. 2. Select **Enable**. 6. Click **Save Changes**.