--- title: "Modify speed and duplex settings for hardware appliances" slug: "modify-speed-and-duplex-settings-for-hardware-appliances-2" tags: ["DLPNM – SaaS", "SaaS", "Install and Get Started"] updated: 2026-09-01T09:28:14Z published: 2026-09-01T09:28:14Z canonical: "docs.trellix.com/modify-speed-and-duplex-settings-for-hardware-appliances-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Modify speed and duplex settings for hardware appliances By default, the network interfaces are configured for auto-negotiation. Use the command line to change the speed and duplex settings. 1. Using a command-line session, log on to the appliance. 2. From the options menu, select the **Shell** option. 3. View the help on forming the command. `$ /opt/NETAwss/mgmt/nic_options -?` - Use `lan1` for the client interface and `mgmt` for the management interface. - `--(no)autoneg` turns auto-negotiation on or off. The default is on. - `--duplex` specifies the duplex — half or full. The default is full. - `--speed` specifies the network speed in Mb/s 10000 (Trellix DLP 8800, Trellix DLP 7700, and Trellix DLP 6600 only), 1000, 100, or 10. The default is 10000 Mb/s for Trellix DLP 8800, Trellix DLP 7700, and Trellix DLP 6600 appliance models. - `--mtu` specifies the Maximum Transmission Unit (MTU) size in bytes — a value between 576–1500. The default is 1500. 4. Enter the command to change the setting. *Examples:* - To disable auto-negotiation and set a network speed of 100 Mb/s on the client interface: `$ sudo /opt/NETAwss/mgmt/nic_options --noautoneg --speed 100 lan1` - To restore the default behavior to the management port: `$ sudo /opt/NETAwss/mgmt/nic_options mgmt`