--- title: "Monitor DB2 on iSeries (System i or AS/400) using Raz-Lee iSecurity" slug: "monitor-db2-on-iseries-system-i-or-as-400-using-raz-lee-isecurity-2" tags: ["Install and Get Started", "DS 10.x", "Database Security"] updated: 2026-09-10T15:20:54Z published: 2026-09-10T15:20:54Z canonical: "docs.trellix.com/monitor-db2-on-iseries-system-i-or-as-400-using-raz-lee-isecurity-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Monitor DB2 on iSeries (System i or AS/400) using Raz-Lee iSecurity You can use Raz-Lee iSecurity software to monitor IBM DB2 databases running on iSeries (System i or AS/400) servers. Install Raz-Lee iSecurity on the zOS server before installing the Database Security sensor. For installation instructions, see Raz-Lee documentation. Communication between the Raz-Lee Agent and the dedicated sensor is established over TCP, with a configurable port. A single sensor can be used to monitor several CorreLog Agents and DB2/zOS database by configuring several databases with different ports. 1. Install Raz-Lee iSecurity. For installation instructions, see Raz-Lee documentation. 2. Install a sensor on a dedicated Linux server. 3. On the **Sensor properties** page, click **Advanced**. 4. In the text box, add an entry on a separate line: `as400.enable=1` 5. Configure the database list file in JSON format as described in `Create database list file`. 6. Restart the sensor. 7. Add rules for this sensor as you would for any other sensor.