--- title: "MOVE AntiVirus 4.10.0 Client Command Line Interface Reference Guide" slug: "move-antivirus-4-10-0-client-command-line-interface-reference-guide" updated: 2026-08-06T07:54:02Z published: 2026-08-06T07:54:02Z canonical: "docs.trellix.com/move-antivirus-4-10-0-client-command-line-interface-reference-guide" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # MOVE AntiVirus 4.10.0 Client Command Line Interface Reference Guide Last Updated: September 17, 2023 --- # Client command line interface You can access the Trellix MOVE AntiVirus (Multi-Platform) client command line interface (CLI) on the managed virtual machine to perform basic maintenance tasks. The CLI is a series of commands that you can issue to the `mvadm` utility. Each command has arguments and parameters that can be added to the command to change its behavior. This reference lists each command in `mvadm`, and all argument variations. ## Access the CLI During installation, a shortcut to the Multi-platform command line interface (CLI) is added to the Windows Start menu. - From the Start menu, select Programs → McAfee → **MOVE AV Client Command Prompt**. > **NOTE** > > Make sure you run this command as an administrator. At this command prompt, you can type commands to perform administration tasks on the VM. ### config Display and edit the configuration settings that are applied to the current installation. ```plaintext mvadm config set NAME=VALUE mvadm config show ``` | **Arguments** | **Description** | | --- | --- | | `set NAME=VALUE` | Sets the value of the configuration argument **NAME** to **VALUE**. | | `show` | Lists the configuration settings. | | **Parameter** | **Value** | **Description** | | --- | --- | --- | | `AllowNetworkScan` | 0 (off) or 1 (on). Default = 0. | Enables or disables scanning of files residing on a network path. | | `ConnTimeout` | A positive integer value. Default = 0 (no timeout). | Sets the connection timeout in milliseconds. | | `EventSink` | An integer between 0 (no notifications) and 14 (all notifications). Default = 14. | Determines where threat events are sent. The total combines the values for Windows Event Viewer log (2), ePO - On-prem Threat Event Log (4), and Trellix system tray pop-up menu (8). | | `IntegrityEnabled` | An integer between 0 (no self-protection) and 7 representing a binary value. Default = 7 (all self-protections). | Determines the active self-protections. The total combines the values for file (1), registry (2), and services (4). | | `LogFileNum` | A positive integer value. Default = 4. | Limits the number of log files allowed before they are overwritten. | | `LogFileSize` | An integer greater than 1024. Default = 2048. | Limits the size (in KB) of an individual log file. | | `MaxFileSize` | A positive integer value. Default to 40. | Limits the size (in MB) of files where scan results are cached. Files up to this size are transferred completely to the SVM for scanning. | | `QuarantineEnabled` | 0 (off) or 1 (on). Default = 1. | Enables or disables quarantine services. | | `Quarantine-Folder` | A valid file path. Default = C:\Quarantine. | Determines where quarantined files are stored. Cannot be a mapped network drive or UNC file path. | | `Quarantine-Days` | A positive integer. Default = 28. | Determines the number of days quarantined files are stored before being deleted. Submitting a 0 turns off quarantined file deletion. | | `RTEMode` | 0 (off) or 1 (on). Default = 0. | Indicates protection status on the VM. This value cannot be changed through the config command. | | `OASStatus` | 0 (off) or 1 (on). Default = 0. | Enables or disables the on-access scan on the VM. On the next policy enforcement, the settings are changed based on the configurations in the on-access scan policy in ePO - On-prem. | | `ODSStatus` | 0 (off) or 1 (on). Default = 0. | Enables or disables the on-demand scan on the VM. On the next policy enforcement, the settings are changed based on the configurations in the on-demand scan policy in ePO - On-prem. | | `ScanAllFile-Types` | 0 (specific extensions) or 1 (all files). Default = 1. | Determines whether to scan all files or only specific extensions. | | `ODSScanAllFileTypes` | 0 (specific extensions) or 1 (all files). Default = 1. | Determines whether to scan all files or only specific extensions for the on-demand scan. | | `ScanFlags` | An integer between 0 (no operations scanned) and 7 representing a binary value. Default = 7 (all operations scanned). | Determines which operations trigger scanning. The total combines the values for Read (1), Write (2), and Backup (4). | | `ScanTimeout` | A positive integer. Default = 45000. | Limits the time (in milliseconds) allowed for file scans after which the file can be accessed. | | `ODS ScanTimeout` | A positive integer. Default = 45000. | Limits the time (in milliseconds) allowed for an on-demand scan after which the file can be accessed. | | `ServerAddress1` | An IPv4 address or FQDN. No default. | Specifies the IPv4 address or FQDN of the primary SVM used by the VM. | | `ServerAddress2` | An IPv4 address or FQDN. No default. | Specifies the IPv4 address or FQDN of the secondary SVM used by the VM. | | `ServerPort1` | Between 1024 and 65535. Default = 9053. | Specifies the port used to communicate with the primary SVM. | | `ServerPort2` | Between 1024 and 65535. Default = 9053. | Specifies the port used to communicate with the secondary SVM. | | `ThreatAction1` | 0 (delete) or 1 (deny access). Default = 0. | Determines the primary action taken when a threat is detected. | | `ThreatAction2` | 0 (delete) or 1 (deny access). Default = 1. | Determines the secondary action taken when a threat is detected. | | `ODS ThreatAction1` | 0 (delete) or 1 (deny access). Default = 0. | Determines the primary action taken when a threat is detected during on-demand scan. | | `ODSThreatAction2` | 0 (delete) or 1 (deny access). Default = 1. | Determines the secondary action taken when a threat is detected during on-demand scan. | | `SVMManagerAddress` | An IPv4 address or FQDN. No default. | Specifies the IPv4 address or FQDN of the SVM Manager. | | `SVMManagerPort` | Between 1024 and 65535. Default = 8080. | Specifies the port used to communicate with SVM Manager. | ### ftypes Display and edit the list of file extensions to be sent for scanning. ```plaintext mvadm ftypes add oas mvadm ftypes remove oas mvadm ftypes list oas mvadm ftypes add oas exe pdf zip mvadm ftypes add ods exe pdf zip ``` The **ftypes** command does not support wildcards, and extensions must be an exact match. For example, issuing an `mvadm ftypes add doc` command does not cause `.DOCX` files to be scanned. | **Arguments** | **Description** | | --- | --- | | `add oas <extn>` | Adds the files with extension for anti-virus scanning. | | `remove oas <extn>` | Removes the files with extension from the list of files to be included for scanning. | | `list oas` | Lists the file extensions to be included for on-access scanning. | | `add oas exe pdf zip` | Adds the files with extensions **exe**, **pdf**, and **zip** to be included for on-access scanning. | | `add ods exe pdf zip` | Adds the files with extensions **exe**, **pdf**, and **zip** to be included for on-demand scanning. | --- ## help Display usage information for the **mvadm** utility. ```plaintext mvadm help mvadm help command ``` | **Arguments** | **Description** | | --- | --- | | `default` | Lists the summary description for the Trellix MOVE AntiVirus client CLI commands. | | `command` | Lists the detailed Help for the provided command. | ### loglevel View and edit the log level of the Trellix MOVE AntiVirus client. ```plaintext mvadm loglevel ``` ```plaintext mvadm loglevel enable {MODULE_NAME | ALL} {TYPES... | ALL} ``` ```plaintext mvadm loglevel disable {MODULE_NAME | ALL} {TYPES... | ALL} ``` | **Arguments** | **Description** | | --- | --- | | default | Lists the current log level of each module that is part of the Trellix MOVE AntiVirus client. Use this form to get a full list of modules for use with other forms of the **loglevel** command. | | enable {MODULE_NAME \| ALL} {TYPES... \| ALL} | Sets the log level for module **MODULE_NAME** or all modules to the specified log level types or to all types. | | disable {MODULE_NAME \| ALL} {TYPES... \| ALL} | Clears the specified log level types or all types for module **MODULE_NAME** or for all modules. | These are the supported log level types: - Error - Warning - System - Info - Detail - Fnentry - Fnexit ### On-demand scan loglevel View and edit the log level of the Trellix MOVE AntiVirus ODS clients. `ODSLOG` The `ods.log(ods<n>.log)` file is created on client and installed at: `mvadm loglevel enable/disable <module_name>` ODSLOG. | **Arguments** | **Description** | | --- | --- | | `mvadm loglevel enable all ODSLOG` | Enable ODSLOG loglevel on client for all modules. | | `mvadm loglevel disable all ODSLOG` | Disable ODSLOG loglevel on client for all modules. | List of files: **Table 1. Trellix MOVE AntiVirus Client** | **File name** | **Location** | **Description** | | --- | --- | --- | | `ods.log` | | Trellix MOVE AntiVirus Client log, rolled over logs will be named similarly (ods1.log,ods2.log, etc.) Stores results of ODS/TODS on system. | **Table 2. Trellix MOVE AntiVirus SVM Manager** | **File name** | **Location** | **Description** | | --- | --- | --- | | `Mcafee.movesvmmanager.service` | /lib/systemd/system/ | Control script for regulating SVA Manager process. File available from Trellix MOVE AntiVirus Multi-platform 4.9.0 onwards. | ### pp Specify trusted processes. All files acted on by a trusted process are excluded from scans. Process passthru rule supports these path formats: - Just the process name, for example: `xyz.exe` - Partial path, for example: `abc\xyz.exe` - Complete path, for example: `C:\abc\xyz.exe` - Windows path, for example: `%windir%\abc\xyz.exe` Note these points while using the **pp** command to specify trusted processes: - If `%abc%` does not resolve, delete it from the list. - This format is only valid from ePO - On-prem. - This resolves the path concerning the system user. `mvadm pp list oas` `mvadm pp list ods` ```plaintext mvadm pp add oas mvadm pp remove oas mvadm pp set mvadm pp add oas ``` | **Arguments** | **Description** | | --- | --- | | `list oas` | Displays a list of all trusted processes for on-access scanning. | | `list ods` | Displays a list of all trusted processes for on-demand scanning. | | `add oas <process image path>` | Adds the specified process (or processes) as a trusted process. For example: ```plaintext mvadm pp add userprofilemanager.exe ``` All files acted on by the `userprofilemanager.exe` file are excluded from the scan. | | `remove oas <process image path>` | Removes the specified process (or processes) as a trusted process. | | `set <process image path>` | Removes all existing trusted processes and adds the specified process (or processes) as trusted processes. | | `add oas <file path>` | Adds the specified file path as a trusted file path for an on-access scan. For example: ```plaintext mvadm pp add oas c:\windows\system32\notepad.exe ``` All file paths acted on by the `c:\windows\system32\notepad.exe` file path are excluded from on-access scan. | ### **exp** Specify path exclusion. All paths acted on by a trusted process are excluded from on-access scan. ```plaintext mvadm exp add oas mvadm exp list oas ``` | **Arguments** | **Description** | | --- | --- | | `add oas <file path>` | Excludes the specified file path from the trusted file path during on-access scan. For example: ```plaintext mvadm exp add oas "3\|11\|c:\folder1\*.txt" ``` 3 \| 11 — Scans the specified directory only. 3 \| 15 — Scans the specified directory and subdirectories. All file paths acted on by the `3\|11\|c:\folder1\*.txt` file path are excluded during on-access scan. | | `list oas` | Lists excluded file paths from on-access scan. | ### q Change the quarantine behavior for Trellix MOVE AntiVirus (Multi-Platform). mvadm q list mvadm q restore mvadm q remove | **Arguments** | **Description** | | --- | --- | | `list` | Lists the currently quarantined files and their detection type. | | `restore <detected as>` | Restores all **.VIR** files from the currently configured quarantine folder with the specified **** category. | | `remove <detected as>` | Deletes all **.VIR** files from the currently configured quarantine folder with the specified **** category. | ### status Display the current state of the Trellix MOVE AntiVirus client in terms of operational mode (enabled or disabled) and its Trellix MOVE AntiVirus Multi-Platform SVM details. mvadm status | **Arguments** | **Description** | | --- | --- | | `default` | Lists the current Trellix MOVE AntiVirus client status. | | `OASStatus` | Displays the current status of the on-access scan. | | `ODSStatus` | Displays the current status of the on-demand scan. | | `ODSScanAllFiletypes` | Lists all file types to be scanned for on-demand scanning. | **Example 1. Example** If TODS/Schedule ODS is running on client then `mvadm status` display progress. ```plaintext C:\Windows\system32\mvadm status Scan Configuration: Enabled On Access Scan: Enabled On Demand Scan: Enabled On Demand Scan State: Progress Driver Status: Driver is loaded Primary Server: xxx.xxx.xxx.xxx:9053 [Active] Secondary Server: NONE:9053 [Not Configured] SVA Manager: NONE:8080 [Not Configured] Protection Status: Enabled ``` **If TODS/Schedule is not running on client:** ```plaintext C:\Windows\system32\mvadm status Scan Configuration: Enabled ``` ```plaintext On Access Scan: Enabled On Demand Scan: Enabled On Demand Scan State: Not Running Driver Status: Driver is loaded Primary Server: xxx.xxx.xxx.xxx:9053 [Active] Secondary Server: NONE:9053 [Not Configured] SVA Manager: NONE:8080 [Not Configured] Protection Status: Enabled ``` **If TODS/Scheduled ODS is running on client:** ```plaintext C:\Windows\system32\mvadm status Scan Configuration: Enabled On Access Scan: Enabled On Demand Scan: Enabled On Demand Scan State: Running[3.98 % : Finished] Driver Status: Driver is loaded Primary Server: xxx.xxx.xxx.xxx:9053 [Active] Secondary Server: NONE:9053 [Not Configured] SVA Manager: NONE:8080 [Not Configured] Protection Status: Enabled ``` ### On-demand scan stats Display the information related to On-demand scan on SVM. ```plaintext mvadm stats ods ``` | **Arguments** | **Description** | | --- | --- | | `List of Connected Clients` | IP address list of connected Trellix MOVE AntiVirus Multi-platform clients . | | `Number of connected Clients` | Number of connected Trellix MOVE AntiVirus Multi-platform clients. | | `Target On Demand Scan` | Trellix MOVE AntiVirus Multi-platform client GUID and IP address of system currently running TODS. | | `Scheduled On Demand Scan` | Trellix MOVE AntiVirus Multi-platform client GUID and IP address of system currently running Scheduled on demand. | **Example 2. Example** The output of the `mvadm stats ods` command from one SVM where 6 clients are connected and on one of client TODS is running: ![Command-line screenshot titled mvadm stats ods showing a black terminal window with an ASCII table listing connected clients (IP Address entries obscured), Number of connected clients : 6, and a Target On Demand Scan table with Agent GUID and IP Address columns.](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/move-antivirus-4.10.0-client-command-line-interface-reference-guide_page_0011_img_01.png?sv=2026-02-06&spr=https&st=2026-11-20T15%3A16%3A48Z&se=2026-11-20T16%3A16%3A48Z&sr=c&sp=r&sig=ik9WYJoNZRSPa2lM5qmjG9soXxzUVvyXeXKqv4y6PMU%3D) ### version Display the version of the Trellix MOVE AntiVirus client installed on the VM. ```plaintext mvadm version ``` | Arguments | Description | | --- | --- | | default | Displays the version of the Trellix MOVE AntiVirus client installed on the VM. This is useful for verifying that an upgrade operation is complete, or checking if an upgrade is needed. | ### Cert View, add, or remove certificates from the Certificate policy. | Arguments | Description | | --- | --- | | mvadm cert | View the existing certificates added to the Certificate policy. | | mvadm cert add | Add certificate to the Certificate policy. | | mvadm cert remove | Remove certificate from the Certificate policy. | ### Scanning folders Run on-demand scan on a specific folder. | **Arguments** | **Description** | | --- | --- | | ```plaintext mvadm tods path ``` Example: To run the on-demand scan on `C:\Windows` folders ```plaintext >mvadm tods path C:\Windows\ ``` | Start on-demand scan on the path specified. | ## Password-protected CLI Set password protection through the client policy to prevent users from changing the anti-virus settings, or disabling the anti-virus protection. After setting the password, type the password to execute any of these commands on the **mvadm** command line of the clients. - `config` - `filetypes` - `procpassthru` - `loglevel` ## Set password for client CLI Specify the password on the ePO - On-prem server to prevent users from changing the anti-virus settings, or disabling the anti-virus protection on the client. You installed the Trellix MOVE AntiVirus extension on the ePO - On-prem server. For details about product features, usage, and best practices, click ? or Help. 1. Log on to ePO - On-prem as an administrator 2. Select Menu → Policy → **Policy Catalog**, then select **MOVE AntiVirus Common 4.6.0** from the Product list. 3. From the **Category** list, select **Options**. 4. Click the name of an editable policy. 5. Select **Enable Self-Protection for MOVE CLI**, then type and confirm the password. 6. Click **Save** to modify the policy. **Results** You can now verify that the commands on the client system are password-protected.