--- title: "MOVE AntiVirus 4.10.x Interface Reference Guide" slug: "move-antivirus-4-10-x-interface-reference-guide" updated: 2026-08-06T10:17:10Z published: 2026-08-06T10:17:10Z canonical: "docs.trellix.com/move-antivirus-4-10-x-interface-reference-guide" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # MOVE AntiVirus 4.10.x Interface Reference Guide Last Updated: September 17, 2023 # General page (Configuration tab) Allows you to configure your **Trellix ePO - On-prem** details, **Trellix MOVE AntiVirus** SVM (Agentless), and SVM Manager (Multi-Platform) details on the **Trellix ePO - On-prem** server. | **Option** | **Definition** | | --- | --- | | **ePO Credentials** | - **Password —** Type the password of the **Trellix ePO - On-prem** management console that the administrator has currently logged on. - **Confirm Password —** Retype the password of the **Trellix ePO - On-prem** management console that the administrator has currently logged on. | | **SVM (Agentless) and SVM Manager (Multi-Platform) Configuration** | - **Hostname Prefix (Agentless only) —** Type a unique prefix that is added to the host name of the SVM. The prefix can include characters a–z, A–Z, 0–9, and [-], without space. - **Password —** This field is used to configure your password for **Trellix MOVE AntiVirus** SVM (Agentless) or SVM Manager (Multi-Platform). (Agentless) Type a password for the available **Trellix MOVE AntiVirus** SVM. This password is set for the SVM after deployment. (Multi-Platform) Type a password for the available SVM Manager (Multi-Platform). This password is set for the SVM Manager after deployment. - The password must be at least 6 characters long. - The password must contain at least one uppercase letter (A-Z) and one numeric character (0-9). - **Confirm Password —** Retype the password. | | **Save** | Click to store these configurations, so that you can use them for every **Trellix MOVE AntiVirus** SVM (Agentless) or SVM Manager (Multi-Platform) deployment. | | **Reset** | Click to reset the parameters. | --- ## IP Pool page (Configuration tab) Before configuring the IP address as Static, create an IP Pool. You can then select this IP Pool during the SVM deployment, so that any unused IP address of the IP Pool is automatically assigned to the SVM. | **Option** | **Definition** | | --- | --- | | **IP Pool Name** | Type a name for the IP Pool. | | **Start IP** | Type the starting IP address for the pool. | | **End IP** | Type the ending IP address for the pool. | | **Gateway** | Type the default gateway address. | | **Prefix Length** | Type the Prefix length. | | **Primary DNS** | (Optional) Type the IP address of the Primary DNS server for hostname-to-IP address resolution. | | **Secondary DNS** | (Optional) Type the IP address of the Secondary DNS server for hostname-to-IP address resolution. | | **Used / Total** | Specifies the total number of IP addresses and the number of used IP addresses of the IP Pool. Example: **2/3** means that 2 IP addresses are used out of the available 3 IP addresses in the IP Pool. | | **Actions** | - **Edit** — Use this option to edit the IP Pool details. - **Delete —** Use this option to delete the IP Pool when its IP addresses are not in use. **Add IP Pool —** Select to configure the IP Pool details required for SVM deployment. | ## NSX Manager Registration page Using this configuration available on the **ePolicy Orchestrator - On-prem** server, you can edit the details and validate the credentials of your NSX Manager. | **Option** | **Definition** | | --- | --- | | vCenter Account | Specifies the name of the registered vCenter account. | | NSX Manager Name | Specifies the name of your NSX Manager. **Note:** Do not include spaces. | | Configuration Status | Displays these registration statuses: - **Configured —** Indicates that NSX Manager is registered and ready for deployment. - **Not Configured —** Indicates that the NSX Manager is not registered. Therefore click **Edit** and configure it before deployment. - **Credentials unknown —** Indicates that the NSX Manager is registered with VMware vCenter, but the credentials are unknown. Click **Edit** and configure it before deployment. | | **Action** | **Edit —** Click to open the **Edit NSX Manager Details** dialog box and edit the NSX Manager account details. | --- # Trellix MOVE AntiVirus Service Registration (NSX) page You can select the required **Trellix MOVE AntiVirus** SVM version and register it with VMware NSX Manager, which was registered to the **Trellix ePO - On-prem** server. This allows you to deploy the **Trellix MOVE AntiVirus** SVM to one or more clusters. | **Option** | **Definition** | | --- | --- | | NSX Manager Name | Specifies the name of the registered NSX Manager. | | NSX Manager Address | Specifies the IP address of your NSX Manager. | | vCenter Account | Specifies the name of the vCenter account that is registered with NSX Manager and **Trellix ePO - On-prem**. | | Registered SVM Version | Specifies the version of the **Trellix MOVE AntiVirus** SVM checked in to **Trellix ePO - On-prem**. | | Service Registration Status | Displays these registration statuses values: - **Registered** — Indicates that the **Trellix MOVE AntiVirus** service is registered and ready for deployment. - **Not Registered** — Indicates that the **Trellix MOVE AntiVirus** service is not registered. - **Registration Failed** — Indicates that the **Trellix MOVE AntiVirus** service is failed. | | Actions | - **Register** — Click to select the latest **Trellix MOVE AntiVirus** SVM and register it to the vCenter that is added to your NSX Manager. - **Unregister** — Click to unregister the **Trellix MOVE AntiVirus** service and to remove it from the vCenter that is added to your NSX Manager. - **Upgrade** — Click to upgrade the **Trellix MOVE AntiVirus** service. > **Note:** Make sure that you have checked in the latest SVM required for the upgrade. Otherwise, the existing **Trellix MOVE AntiVirus** service is deployed to the ESXi servers. | --- ## Edit NSX Manager Details page Use this page to view and edit the configuration details of your NSX Manager. | **Option** | **Definition** | | --- | --- | | vCenter Account | Specifies the name of the registered vCenter account. | | NSX Manager Name | Type the name of the available NSX Manager. > **Note:** Do not include spaces. | | NSX Manager Address | Type the IP address or the host name of the available NSX Manager. | | NSX Manager Port | Specifies the port number of NSX Manager. | | NSX Manager Username | Type the user name of the available NSX Manager. | | NSX Manager Password | Type the password of the available NSX Manager. | | Validate Credentials | Click to verify the credentials of the NSX Manager and check that the connection to the NSX Manager works. | | Save | Saves the NSX Manager details. | | Cancel | Navigates to the previous page. | --- # vShield Manager page (Configuration tab) Use this page to view and edit the configuration details of the vShield Manager. | **Option** | **Definition** | | --- | --- | | vCenter Account | Specifies the name of the registered vCenter account. | | vShield Manager | Specifies the name of the registered vShield Manager. | | Configuration Status | Displays these configuration statuses: - **Configured —** Indicates that the vShield Manager is registered and ready for deployment. - **Not Configured —** Indicates that the vShield Manager is not registered. Therefore, click **Edit** and configure it before deployment. - **Credentials unknown —** Indicates that the vShield Manager is registered with VMware vCenter, but the credentials are unknown. Click **Edit** and configure it before deployment. | | Action | **Edit —** Click to edit and validate the existing vShield Manager configuration. | ## SVM Repository page (Configuration tab) You must check in and host the SVM package in **Trellix ePO - On-prem**, so that you can deploy it to the hypervisor. You can view and delete the SVM package using **Trellix ePO - On-prem**. | **Option** | **Definition** | | --- | --- | | **SVM Name** | Specifies the name of the Trellix MOVE AntiVirus SVM package checked in to Trellix ePO - On-prem. | | **SVM Version** | Specifies the version of the Trellix MOVE AntiVirus SVM package checked in to **Trellix ePO - On-prem.** | | **SVM Use Count** | Specifies the number of SVMs, which are present in the infrastructure. | | **Action** | **Delete** — To remove an existing **Trellix MOVE AntiVirus** SVM when it is not deployed to any hypervisor. It is possible to delete the SVM only when the **SVM Use Count** is zero. **Add SVM** — Select to open the **Check-in SVM (zip) File** page. | ## Check-in SVM (zip) File page Allows you to browse and select the SVM package for Agentless deployment, so that it checks-in the SVM package to **Trellix ePO - On-prem.** | **Option** | **Definition** | | --- | --- | | **SVM OVF Details** | Select SVM (zip) file to check-in — Browse to and select the **Trellix MOVE AntiVirus** SVM package. | | **OK** | Checks-in the SVM package to **Trellix ePO - On-prem.** | | **Cancel** | Cancels the check-in. | ## Server Settings page (Configuration tab) Use this page to view and edit the configuration details of the NSX server. | **Option** | **Definition** | | --- | --- | | **Policy Enforcement Interval (Minutes)** | Specifies the interval for policy enforcement in minutes. | | **Policy Collector** | Enable this option to enforce unique scan policies on specific virtual machines protected by SVM. | | **NSX Tagging Interval (Minutes)** | Specifies the interval for NSX tagging for detecting malware. | | **Run Policy Collector** | Click **Run** to collect the policies that are available in NSX Manager. > **Note:** On successful completion of policy collection, message appears as **Policy collection completed successfully.** | | **NSX Tagging** | Specifies that the VM is tagged with the tag for detecting malware. - **NSX Virus Found Tag** — Enable this option so that the VM is tagged with `ANTI_VIRUS.VirusFound.threat=high` on detecting a malware. - **NSX Unprotected Tag** — Enable this option to automatically retrieve the details of the unprotected VMs, tag them with `MCAFEE.MOVE.unprotected=yes`, and display them on the NSX Manager. This tag resource indicates that these VMs are not protected by Trellix MOVE AntiVirus. By default, this option is enabled. The `MCAFEE.MOVE.unprotected=yes` tag is automatically removed from the VMs when they are protected. | | **Edit** | Click to open the **Edit Server Settings** page and edit the NSX server settings. | # Edit Server Settings page (Configuration tab) Before deploying the SVM, complete this one-time configuration on the Trellix ePO - On-prem server, so that these settings are retrieved and used for every SVM deployment, which is done from the same Trellix ePO - On-prem server. | Option | Definition | | --- | --- | | Policy Enforcement Interval (Minutes) | Specify the interval for policy enforcement in minutes. Default interval time is 60 minutes. | | NSX Tagging Interval (Minutes) | Specify the interval for NSX tagging for detecting malware. Default interval time is 60 minutes. | | NSX Tagging | Allows you to set the tagging settings on detecting malware. - **NSX Virus Found Tag** — Enable this option so that the VM is tagged with ANTI_VIRUS.VirusFound.threat=high on detecting a malware. - **NSX Unprotected Tag** — Enable this option to automatically retrieve the details of the unprotected VMs, tag them with MCAFEE.MOVE.unprotected=yes, and display them on the NSX Manager. This tag resource indicates that these VMs are not protected by Trellix MOVE AntiVirus. By default, this option is enabled. The MCAFEE.MOVE.unprotected=yes tag is automatically removed from the VMs when they are protected. | | Save | Saves the NSX server settings. | | Cancel | Navigates to the previous page. | ## Infrastructure Details page (Configuration tab) After registering your vCenter account, your default virtual group is added to the MOVE AntiVirus Deployment wizard when you access the Infrastructure Details option under Autoscale. --- | **Option** | **Definition** | | --- | --- | | Group Name | Specifies the name of the infrastructure group. | | Cloud Account Name | Specifies the account name of the registered vCenter account. | | ESXi / Cluster | Specifies the IP address or name of the hypervisor or the cluster selected as part of the infrastructure group. | | IP Pool Name | Specifies the name of the IP Pool used in the infrastructure group. | | Provisioning Type | Specifies the provision type as **Thin** or **Thick**. | | Network Name | Specifies the name of the management network used by the group. | | Datastore Name | Specifies the name of the datastore used by the infrastructure group. | | Action | - **Edit** — Click to edit the infrastructure group properties. - **Delete** — Click to delete any of the unused infrastructure group. | | Actions | - **Create** — Select to configure the properties for the custom infrastructure group details. It is not mandatory to configure the custom group details when the default group is available. | ## Configure Autoscale Infrastructure Group Details page Allows you to configure these properties for the custom infrastructure group details. | **Option** | **Definition** | | --- | --- | | **Group Name** | Type a unique name for the virtual infrastructure group. > **Note:** Do not include spaces. | | **Infrastructure Type** | Select whether you want to create a group based your hypervisor or cluster. | | **Select Host or Select Cluster** | - **Select Host —** Select the IP address of your host. - **Select Cluster —** Select the IP address of your cluster. | | **Hostname Prefix** | Type a unique prefix that is added to the host name of the hypervisor or cluster. The prefix can include characters a–z, A–Z, 0–9, and [-], without space. | | **IP Pool** | Select the IP Pool type as **Static** or **DHCP** from the drop-down list. | | **AD Server** | Select the registered Active Directory server, so that the deployed SVM is automatically added to the selected domain. | | **Provisioning Type** | Select the provision type as **Thin** or **Thick** from the drop-down list. | | **Network Name** | Select the required management network from the drop-down list. | | **Datastore Name** | Select the configured datastore for the infrastructure. | | **Save** | Saves the infrastructure group details. | | Back | Navigates to the previous page. | # Edit Infrastructure Details page (Configuration tab) This page allows you to edit the properties of an existing infrastructure group details. | **Option** | **Definition** | | --- | --- | | Group Name | Type a unique name for the virtual infrastructure group. > **Note:** Do not include spaces. | | Select Virtual Account | Select the infrastructure cloud account to edit. | | Infrastructure Type | Select whether you want to create a group based your hypervisor or cluster. | | Select Host or Select Cluster | - **Select Host —** Select the IP address of your host. - **Select Cluster —** Select the IP address of your cluster. | | Hostname Prefix | Type a unique prefix that is added to the host name of the hypervisor or cluster. The prefix can include characters a–z, A–Z, 0–9, and [-], without space. | | IP Pool | Select the IP Pool type as **Static** or **DHCP** from the drop-down list. | | AD Server | Select the registered Active Directory server, so that the deployed SVM is automatically added to the selected domain. | | Provisioning Type | Select the provision type as Thin or Thick from the drop-down list. | | Network Name | Select the required management network from the drop-down list. | | Datastore Name | Select the configured datastore for the infrastructure. | | Save | Saves the infrastructure group details. | | Back | Navigates to the previous page. | ## SVM Manager Configuration (Configuration tab) Allows you to view and configure the SVM Manager OVF details for SVM Manager deployment to your hypervisor. | **Option** | **Definition** | | --- | --- | | SVM Manager OVF Name | Specifies the name of the SVM Manager OVF package checked in to the Trellix ePO - On-prem server. | | SVM Manager OVF Version | Specifies version of the SVM Manager OVF package checked in to the Trellix ePO - On-prem server. | | Action | - Delete — Click to delete any of the checked in SVM Manager OVF. | | Actions | - Add SVM Manager — Click to open the Check-in SVM Manager OVF (zip) File page. | | Deployment Configuration | - Infrastructure Group — Select the Default Group or an infrastructure group you created. - Checked-in OVF — Select the SVM Manager OVF package that is checked in to the **Trellix ePO - On‑prem** server. - **SVM Manager Settings policy** — Select the SVM Manager Settings policy, so that it is applied to the SVM Manager. - **Deploy SVM Manager** — Click to deploy the SVM Manager to your hypervisors. - **Upgrade SVM Manager** — Click to upgrade the existing SVM Manager. - **Delete SVM Manager** — Click to remove the SVM Manager checked in to the **Trellix ePO - On‑prem**. | ## Check-in SVM Manager OVF (zip) File page Allows you to check in the SVM Manager OVF package to the **Trellix ePO - On‑prem** server, so that **Trellix ePO - On‑prem** can deploy it to your hypervisor. | **Option** | **Definition** | | --- | --- | | SVM Manager OVF Check-in | - **Select SVM Manager OVF (zip) file to check-in** — Browse to and select the SVM Manager OVF package for deployment. - **Specify the location of McAfee ePO system** — Specify the SVM Manager OVF package location on the **Trellix ePO - On‑prem** server (for example, C:\SVM Manager). The package is taken from this location during deployment to the hypervisor. | | **OK** | Checks in the SVM Manager OVF package to the **Trellix ePO - On‑prem** server. | | **Cancel** | Navigates to the previous page. | # Client Deployment Configuration page Using this page, you can configure and deploy the client package to virtual machines, so that **Trellix ePO - On-prem** can manage the **Trellix MOVE AntiVirus** configuration on client systems. | **Option** | **Definition** | | --- | --- | | Client Configuration | **Client Package —** Select the client package from the drop-down list for deployment. | | SVM Manager | - **Available SVM Manager —** Specifies the SVM Manager that is deployed on your hypervisor. - **SVM Assignment Rules —** Specifies the tag and IP-based rules, if the selected client systems are part of the assignment rules. | | Proceed | Initiates the client deployment. | | Cancel | Cancels the client deployment. | ## SVM Configuration (Configuration tab) You must configure an SVM OVF template in **Trellix ePO - On-prem**, so that it is used for SVM autoscaling. You can view and delete the SVM OVF template using **Trellix ePO - On-prem**. | **Option** | **Definition** | | --- | --- | | SVM OVF Name | Specifies the name of the **Trellix MOVE AntiVirus** SVM OVF template checked in to the **Trellix ePO - On-prem** server. | | SVM OVF Version | Specifies the version of the **Trellix MOVE AntiVirus** SVM OVF package checked in to **Trellix ePO - On-prem**. | | SVM OVF Use Count | Specifies the number of SVMs that are deployed for SVM autoscaling. | | Action | **Delete** — To remove an existing **Trellix MOVE AntiVirus** SVM when it is not deployed to any hypervisor. It is possible to delete the SVM only when the **SVM Use Count** is zero. | | Actions | **Add SVM** — Select to open the **Configure SVM OVF** page. | ## Configure SVM OVF page Using this page, you can export an SVM OVF template to make a master image of an SVM, from which you can deploy many SVMs. You can also specify the location of the SVM OVF template that you exported using export utility tool, so that **Trellix MOVE AntiVirus** can deploy SVMs, as needed. | **Option** | **Definition** | | --- | --- | | Configure SVM OVF template | - **Export an existing SVM or create and export from a VM** — Allows you to export an SVM OVF template from an existing SVM or a VM. - **Registered Cloud Account** — Select a VMware vCenter account where the VM is present. - **VM Name** — Type the name of the VM. - **Username** — Type the user name of the VM. - **Password** — Type the password of the VM. - **Confirm Password** — Retype the password. - **SVM Location on McAfee ePO** — Specify the location on the Trellix ePO - On-prem server. This location is used to store the exported SVM OVF template. - **SVM OVF Version** — Type a version for the SVM OVF template, for example, **4.6.0.** - **SVM OVF Name —** Type a name for the SVM OVF template, for example, ESVM 4.6.0. - **Description —** (Optional) Type details about the SVM OVF template, to help identify the SVM OVF template. - **Specify the SVM OVF location available in the McAfee ePO system —** Allows you to specify the location of the SVM OVF template that you exported using export utility tool. - **SVM Location on McAfee ePO —** Specify the location on the Trellix ePO - On-prem server. This location is used to store the exported SVM OVF template. - **SVM OVF Version —** Type a version for the SVM OVF template, for example, 4.6.0. - **SVM OVF Name —** Type a name for the SVM OVF template, for example, ESVM 4.6.0. - **Description —** (Optional) Type details about the SVM OVF template, to help identify the SVM OVF template. | | **Proceed** | Click to export and check in an SVM OVF template to the Trellix ePO - On-prem server. | | **Cancel** | Click to cancel the SVM export. | ## Autoscale SVM Details page (Configuration tab) Use this page to view the details of the SVMs, which are deployed using the autoscale feature. You can view the deployed SVM and the infrastructure group details. --- | **Option** | **Definition** | | --- | --- | | Preset | Allows you to select an option to filter and display the deployed SVM modes: - **All** — Filters and displays all the SVMs deployed using the autoscale deployment. - **Standby** — Filters and displays all the standby SVMs. - **Ready** — Filters and displays all the ready SVMs. - **Running** — Filters and displays all the running SVMs. | | Hostname | Specifies the host name of the deployed Trellix MOVE AntiVirus SVM. | | Assignment Rule | Specifies the name of assignment rule, which assigns a set of endpoints to a selected SVM or a number of SVMs, so that those clients are protected by the SVM Manager assignment rule. | | Infrastructure Group | Specifies whether it is a hypervisor-based or cluster-based infrastructure group. | | Version | Specifies the version of the SVM. | | SVM Mode | Specifies the mode of the deployed SVM: - **All** — Filters and displays all the SVMs deployed using the autoscale deployment. - **Standby** — Standby SVMs are created and are ready to transition to the backup SVM mode. The standby SVMs are automatically deployed based on the backup SVM value. These SVMs are turned off. - **Ready** — Backup SVMs that will be ready for protecting your client systems. You need to calculate the number of ready SVMs required for the maximum number of clients that would need protection at any time of the day. - **Running** — Filters and displays all the running SVMs. These SVMs are powered on, but not protecting the client systems. - **Running —** These SVMs are currently protecting the client systems. | | **SVM Status** | Specifies whether the SVMs are running. | | **Action** | **Edit —** Click to edit the configuration details of a host. | | **Actions** | - **Delete SVMs —** Select to delete the selected SVM. - **Update Standby SVMs —** Select to upgrade the selected SVM. | ## Selection page (Service setup) Allows you to select the hypervisor where the MOVE service and prerequisites have to be installed. | **Option** | **Definition** | | --- | --- | | **Hypervisors** | Lists the hypervisors present under the registered VMware vCenter account. | | **vCenter Account** | Specifies the name of the VMware vCenter account that is registered with Trellix ePO - On-prem. | | **Deployment Type** | Displays the SVM deployment status as **Install** or **Upgrade**. | | **Next** | Navigates to the next page. | | **Cancel** | Cancels the current page. | --- # Configuration page (Service setup) Allows you to configure SVM Hostname, SVM Version, Datastore, Provision Type, Management Network, and IP Configuration. All these parameters are retrieved automatically and they can be edited later. | **Option** | **Definition** | | --- | --- | | Hypervisor | Lists the hypervisors present under the registered VMware vCenter account. | | SVM Version | Version of the SVM package checked in to **Trellix ePO - On-prem.** | | SVM Hostname | Specifies the hostname of the SVM. | | Datastore (Free Space) | Specifies the free space present in the datastore, where the SVM service virtual machines storage is added. | | Provision Type | Specifies the provision type as **Thick** or **Thin**. | | Management Network | Displays the management network specified in the SVM. | | IP Configuration | Specifies the DHCP IP or Static IP Pool to be used. | | Action | Click **Edit** to change the configurations of a single hypervisor. | | Actions | **Group Edit** — You can select multiple hypervisors and click Actions → Group Edit to change the hypervisor settings, so that the changed values are applicable to all selected hypervisors. | | Back | Navigates to the previous page. | | Next | Saves the hypervisor details and then navigates to the next page. | | Cancel | Cancels the current page. | ## Verification page (Service setup) You can verify the various parameters of the services that are installed during the deployment. This step also validates the prerequisites for the SVM deployment. | Option | Definition | | --- | --- | | Hypervisor | Lists the hypervisors present under the registered VMware vCenter account. | | vCenter Account | Specifies the vCenter account of the hypervisor. | | vShield Manager | Specifies the vShield Manager account. | | SVM Version | Version of the SVM package checked in to Trellix ePO - On-prem. | | SVM Hostname | Specifies the hostname of the SVM. | | Datastore (Free Space) | Specifies the free space present in the datastore, where the SVM service virtual machines storage is added. | | Provision Type | Specifies the provision type as Thick or Thin. | | Management Network | Displays the management network specified in the SVM. | | IP Configuration | Displays the IP configuration allotted for the virtual appliance. | | Verification Status | Displays the verification status of these components: - SVM configurations - Host details - The compatibility status of components such as VMware vCenter, vShield Manager, host, VMTools, and Endpoint version - The available datastore space | | **Back** | Navigates to the previous page. | | **Deploy** | Deploys the SVM to the selected hypervisor. | | **Cancel** | Cancels the current page. | ## Selection page (Service remove) Using the **Trellix ePO - On-prem** console, remove the SVM from one or more hypervisors. | **Option** | **Definition** | | --- | --- | | **Hypervisors** | Lists the hypervisors present under the registered VMware vCenter account, where the SVM is already deployed. | | **vCenter Account** | Specifies the name of the VMware vCenter account that is registered with **Trellix ePO - On-prem**. | | **SVM Version** | Specifies the version of the SVM. | | **Next** | Navigates to the next page. | | **Cancel** | Navigates to the previous page. | ## Verification page (Service remove) You can review the verification details after selecting the required hypervisors from which you must remove the SVM. --- | **Option** | **Definition** | | --- | --- | | Hypervisors | Lists the hypervisors present under the registered VMware vCenter account. | | vCenter Account | Specifies the name of the VMware vCenter account that is registered with **Trellix ePO - On-prem**. | | SVM Version | Specifies the version of the SVM. | | SVM VM Name | Displays the name of the SVM host. | | Validation Status | Displays the validation status that specifies whether the SVM can be removed. | | Back | Navigates to the previous page. | | Remove | Removes the SVM from the selected hypervisor. | | Cancel | Cancels the current page. | ## Job Status page (Service setup) After initiating the SVM deployment or upgrade, you can view the deployment status and its details on the **Trellix ePO - On-prem** server. | **Item** | **Description** | | --- | --- | | Hypervisors | Specifies the name of the hypervisor. | | vCenter Name | Specifies the name of VMware vCenter account that is registered with **Trellix ePO - On-prem**. | | Deployment Type | Displays whether the SVM deployment type is **Deploy, Upgrade, or Remove**. | | Status | Specifies the deployment status such as Started, Completed, Failed, Completed with error, and Fatal error. | | **Start Time** | Indicates the date and time when the SVM deployment started. | | **End Time** | Indicates the date and time when the SVM deployment ended. | ## Deployment and task status details page After initiating a deployment, you can view the deployment job status and task status details on the **Trellix ePO - On-prem** server. [Job status](/data-and-email/docs/move-antivirus-4-10-x-interface-reference-guide#) | **Item** | **Description** | | --- | --- | | **Start Time** | Indicates the date and time when the SVM deployment started. | | **End Time** | Indicates the date and time when the SVM deployment ended. | | **Deployment Type** | Displays the deployment type: Agentless (For SVM) Deploy, Upgrade, and Remove. Multi-Platform (For SVM Manager) SVM Manager, Upgrade SVM Manager, and Remove SVM Manager. (For SVM) Configure and export an SVM OVF template | | **Status** | Specifies the deployment status such as **Started, Completed, Failed, Completed with error, and Fatal error**. | | **vCenter Name / IP address** | Specifies the name of VMware vCenter account that is registered with **Trellix ePO - On-prem.** | | **Hypervisors / Hostname** | **Agentless:** Specifies the name of the hypervisor. **Multi-Platform:** - (For SVM Manager) Specifies the name of the hypervisor. - (For SVM) Specifies the host name of the SVM. - (For client) Specifies the host name of the client. | --- **Task status for Hypervisor** | **Item** | **Description** | | --- | --- | | **Node Type** | **Agentless:** Specifies whether the node is an SVM or a hypervisor. **Multi-Platform:** - (For SVM Manager) Specifies whether the node is an SVM Manager or a hypervisor, SVM, or a VM. - (For SVM) Specifies whether the node is an SVM or endpoint. - (For client) Specifies the node type as Endpoint. | | **Task Type** | Specifies the set of internal tasks that happen in a deployment or an upgrade job. The task list for a single job is displayed in sequence with **Start Time**, **End Time**, and **Failure Reasons**, if applicable. For the list of tasks and details, see *Task status details*. | | **Node Name** | **Agentless:** Displays the SVM VM name, or Hypervisor name. **Multi-Platform:** - (For SVM Manager) Displays the SVM Manager name, or hypervisor name, SVM, or the guest VM name. - (For SVM) Displays the name of the VM. - (For client) Displays the host name of the client system. | | **Status** | Specifies the task status such as **Started, Completed, Skipped, Failed, and In Progress**. | | **Failure Reason** | Specifies the reason for the failure of the task. | | **Start Time** | Indicates the date and time when the task started. | | **End Time** | Indicates the date and time when the task ended. | --- **Task status for Guest** | **Item** | **Description** | | --- | --- | | **Node Type** | **Agentless:** Specifies the node as VM. **Multi-Platform:** - (For SVM) Specifies whether the node is an SVM or endpoint. - (For client) Specifies the node type as **Endpoint**. | | **Task Type** | Specifies the set of internal tasks that happen in a deployment or an upgrade job. The task list for a single job is displayed in sequence with **Start Time, End Time, and Failure Reasons**, if applicable. For the list of tasks and details, see *Task status details*. | | **Node Name** | Displays the VM name. | | Status | Specifies the task status such as **Started, Completed, Skipped, Failed,** and **In Progress.** | | Failure Reason | Specifies the reason for the failure of the task. | | Start Time | Indicates the date and time when the task started. | | End Time | Indicates the date and time when the task ended. | | **Option** | **Description** | | --- | --- | | Back | Navigates to the previous page. | | Close | Closes the current page. | ## Options page (Trellix MOVE AntiVirus Common) Allows you to configure the settings to defend files, services, and registry keys on virtual machines and to log events and alerts. | **Option** | **Definition** | | --- | --- | | Self-Protection | - **Enable Self-Protection** — Select to prevent Trellix MOVE AntiVirus services and files from being stopped or modified. - **Enable Self-Protection for MOVE CLI** — Select to protect the command line utility from being accessed by unauthorized users. - **Password** — Type a password. - **Confirm Password** — Retype the password. | | Events | Allows you to set where to display threat events. Available options are: - **Log events to Windows Application log** — Select to display alerts in the local system's Windows Event Log. - **Send events to McAfee ePO** — Select to display alerts in the **Trellix ePO - On-prem Threat Event Log** | | **Logging** | **Rotate log file content when the file size reaches ____ MB** — Enter the maximum size the Rotate Server log files can reach. Default size is 10 MB. | ## On-access Scan page (Trellix MOVE AntiVirus) The **Trellix MOVE AntiVirus** on-access scan tab contains settings for what files should be scanned and when. | **Option** | **Definition** | | --- | --- | | **On-access scan** | **Enable on-access scan** — Select to use on-access scanning. **Scan** — Available options (and their default states) are: - When writing to disk - When reading from disk - On network drives - Opened for backup (Multi-Platform only) More than one option can be selected. > **Note:** > > The Opened for backup setting can impact backup operation performance for **Trellix MOVE AntiVirus** clients. **Specify maximum time for each file scan____seconds** — The amount of time to wait for a scan to complete, in seconds. Defaults to 45 seconds. This is the duration for which a Trellix MOVE AntiVirus Agent waits for scan response of a file from the SVM. Typically, file scans are fast. However, file scans might take longer time due to large file size, file type, or heavy load on the SVM. In case, the file scan takes longer than the scan timeout limit, the file access is allowed and a scan timeout event is generated. **Cache scan results for files smaller than ____MB (Multi-Platform only)** — Set the maximum file size (in MB) up to which scan results must be cached. Defaults to 40 MB. Files smaller than this threshold are copied completely to the SVM and scanned. If the file is found to be clean, its scan result is cached based on its SHA‑1 checksum for faster future access. Files larger than this size threshold are transferred in chunks that are requested by the SVM and scanned. > **Warning:** Caching the scan results for large files might reduce the scan performance. **Deferred Scan (Multi-Platform only)** — The deferred scan feature optimizes file scanning for files where the previous scanning is timed out for reasons such as large file size, file structure, and file composition. **Enable on-access deferred scan** — Select to enable the deferred scan. Here are the file size ranges and scan time-out: - > 40 MB and <=200 MB — 480 seconds - > 200 MB and <=4096 MB — 900 seconds - > 4096 MB and above — 1800 seconds | | **Actions** | **Threat detection primary response** — If you select Delete files automatically and quarantine or Delete files automatically, and if that fails Deny access to files. If the primary behavior is set to Deny access to files, no secondary action is available. | | **Threat Detection** | Notify users when a threat is detected on a on-access scan (Multi-Platform only) — Select to notify users when a threat is detected on a on-access scan. | | **File types to scan** | Specifies what file extensions to scan. - **All files** — Select to scan all files. - **Default + Additional files (Multi-Platform only)** — Select to scan the default file types or any additional file types. You can add, edit, and remove any additional file types, which are included for scanning. By default, this option is selected. - **Add** — Opens the **Add Extension** dialog box. You can add the extension of the new file type for scanning. - **Edit** — Opens the **Edit Extension** dialog box for the selected extension of the file type to modify as needed. - **Remove** — Removes the selected extension of the file type from the list. > **Note:** On successful addition, extension of the file type is listed under **Additional Types** tab. **Following only** — Select to specify a list of file extensions to scan. You can add, edit, and remove file extensions that are included for scanning. If you click **Following only**, customize the list of extensions to scan by clicking **Add, Edit,** or **Remove**. Do not include the period when specifying extensions. Wildcards are not supported, and exact matches are required. For example, specifying `DOC` will not scan DOCX files. | | **Exclusions** | Specifies which folders are to be excluded from scanning. - **Path Exclusions —** Specifies a list of folders to exclude from scanning. By default, the **Trellix** common framework files are excluded. Click **Add, Edit, Remove, Import,** or **Clear** to modify the list. > **Note:** Mapped network drives are not supported. If you want to exclude a network path, use the UNC path without the starting '\\' characters. - **Add —** Opens the **Add/Edit Exclusion Item** dialog box. You can add new folders to exclude from scanning. - **Edit —** Opens the **Add/Edit Exclusion Item** dialog box for the selected item to modify as needed. - **Remove —** Removes the selected item from the list. - **Import —** Opens the **Import Exclusion Path** dialog box. You can browse and import the file to add exclusion path. - **Clear —** Clears the whole list of **Path Exclusions**. - **Process Exclusions (Multi-Platform only) —** Specifies a list of processes to exclude from scanning. By default, there are various processes already defined to be excluded. Click **Add, Edit,** or **Remove** to modify the list. - **Add —** Opens **Add Exclusion Process** dialog box. You can add new process to exclude from scanning. - **Edit —** Opens **Edit Exclusion Process** dialog box for the selected item to modify as needed. - **Remove —** Removes the selected process exclusion from the list. - **Publisher Exclusions (Multi-Platform only) —** You can choose to **Trust authenticated** signed files (from Microsoft and Trellix), so that the scanning performance improves by optimized use of resources at the SVM by sending less files for scan from endpoints. - **Cache validity for publisher-based trust on signed files____days —** Specifies the cache validity for publisher based trust on signed files. Defaults to 30 days. - **Maximum wait time for publisher trust verification____seconds —** Specifies the maximum wait time for publisher trust verification. Defaults to 2 seconds. - **Certificate revocation check** - Select and configure the certificate revocation check. These are the available options: - **none —** Trellix MOVE AntiVirus does not do certificate revocation check. - **for end Certificate locally —** Trellix MOVE AntiVirus checks whether the end certificate of the file is valid or has it being revoked. This is checked from the Windows CRL (local cache) that is maintained by Windows locally. - **for full certificate chain locally —** Trellix MOVE AntiVirus checks the complete chain of certificate for a particular digitally signed file against the Windows CRL (local cache) that is maintained by Windows locally. | ## MOVE AntiVirus page-level reference | **Option** | **Definition** | | --- | --- | | | the issuing CA — Trellix MOVE AntiVirus checks against the Windows CRL (local cache) that is maintained by Windows locally and also checks against the issuing CA's (certificate authority) CRL that is done over network. **Note:** CRL = certificate revocation list - **Certificate validity period —** Select and configure the certificate validity period. Available options are Valid forever, and Valid for lifetime of signing certificate. | Enabling **Trellix MOVE AntiVirus** network scanning capabilities, then accessing files across the network severely impacts the access time for network-based files. **Trellix** recommends scanning a file using a scanner closest to the file itself. If a file resides on a network share, rather than enabling **Trellix MOVE AntiVirus** network scanning, use the **Trellix** anti-virus product on the system where the file resides to scan the file. If the file resides on a NetApp Filer we recommend using VirusScan Enterprise for Storage to scan the file. With this approach you maintain good performance while still providing protection ## On-demand Scan page (Trellix MOVE AntiVirus) The **Trellix MOVE AntiVirus** on-demand scan page allows you to configure on-demand scan settings for your virtual environment. | **Option** | **Definition** | | --- | --- | | On-demand scan | - **Enable on-access scan —** Select to enable on-demand scanning. - **Specify maximum time for each file scan_____seconds —** Specify the maximum time (in seconds) for scanning each file. Defaults to 45 seconds. > **⚠️ Warning:** **Caching the scan results for large files might reduce the scan performance.** #### Deferred Scan (Multi-Platform only) — The deferred scan feature optimizes file scanning for files where the previous scanning is timed out for reasons such as large file size, file structure, and file composition. **Enable on-demand deferred scan** — Select to enable the deferred scan. Here are the file size ranges and scan time-out: - **Run on-demand scan for every____days** — Specify the interval time (in days) for on-demand scanning. Defaults to 7 days. - **On-demand scan will stop after____minutes** — Specify the maximum time (in minutes) for on-demand scanning. Defaults to 150 minutes. - **Cache scan results for files smaller than____MB (Multi-Platform only)** — Specify the files size (in MB) of the scan results to cache. Defaults to 40 MB. - > 40 MB and <=200 MB — 480 seconds - > 200 MB and <=4096 MB — 900 seconds - > 4096 MB and above — 1800 seconds | | **Actions** | **Threat detection first response** — If you select **Delete files automatically and quarantine** or **Delete files automatically**, and if that fails **Notify only**. If the first behavior is set to **Notify only**, no secondary action is available. | | **File types to scan** | Specifies what file extensions to be scanned. - **All files** — Select to scan all files. - **Default + Additional files (Multi-Platform only)** — Select to scan the default file types or any additional file types. You can add, edit, and remove any additional file types, which are included for scanning. - **Add** — Opens the **Add Extension** dialog box. You can add the extension of the new file type for scanning. - **Edit** — Opens the **Edit Extension** dialog box for the selected extension of the file type to modify as needed. - **Remove** — Removes the selected extension of the file type from the list. - **Following only** — Select to specify a list of file extensions to scan. You can add, edit, and remove file extensions that are included for scanning. > **Note:** On successful addition, extension of the file type is listed under **Additional Types** tab. If you click **Following only**, customize the list of extensions to scan by clicking **Add**, **Edit**, or **Remove**. Do not include the period when specifying extensions. Wildcards are not supported, and exact matches are required. For example, specifying `DOC` will not scan `DOCX` files. | | **Exclusions** | Specifies which folders are to be excluded from scanning. - **Path Exclusions** — Specifies a list of folders to exclude from scanning. By default, the Trellix common framework files are excluded. Click **Add**, **Edit**, **Remove**, **Import**, or **Clear** to modify the list. | --- --- | Option | Definition | | --- | --- | | **File types to scan** | Specifies what file extensions to be scanned. - **All files** — Select to scan all files. - **Default + Additional files (Multi-Platform only)** — Select to scan the default file types or any additional file types. You can add, edit, and remove any additional file types, which are included for scanning. - **Add** — Opens the **Add Extension** dialog box. You can add the extension of the new file type for scanning. - **Edit** — Opens the **Edit Extension** dialog box for the selected extension of the file type to modify as needed. - **Remove** — Removes the selected extension of the file type from the list. - **Following only** — Select to specify a list of file extensions to scan. You can add, edit, and remove file extensions that are included for scanning. > **Note:** On successful addition, extension of the file type is listed under **Additional Types** tab. If you click **Following only**, customize the list of extensions to scan by clicking **Add**, **Edit**, or **Remove**. Do not include the period when specifying extensions. Wildcards are not supported, and exact matches are required. For example, specifying `DOC` will not scan `DOCX` files. | | **Exclusions** | Specifies which folders are to be excluded from scanning. - **Path Exclusions** — Specifies a list of folders to exclude from scanning. By default, the Trellix common framework files are excluded. Click **Add**, **Edit**, **Remove**, **Import**, or **Clear** to modify the list. > **Note:** Mapped network drives are not supported. If you want to exclude a network path, use the UNC path without the starting '\\' characters. - **Add** — Opens the **Add/Edit Exclusion Item** dialog box. You can add new folders to exclude from scanning. - **Edit** — Opens the **Add/Edit Exclusion Item** dialog box for the selected item to modify as needed. - **Remove** — Removes the selected item from the list. - **Import** — Opens the **Import Exclusion Path** dialog box. You can browse and import the file to add exclusion path. - **Clear** — Clears the whole list of Path Exclusions. | ## Options page (Trellix MOVE AntiVirus) From the **Trellix MOVE AntiVirus Options** tab, you can configure the quarantine manager options that apply to both on-access scanner and on-demand scanner. Also, specifies the SVM assignment details for Multi-Platform. | **Option** | **Definition** | | --- | --- | | Quarantine Manager | (Multi-Platform only) - **Quarantine Directory** — Specify where quarantined items are stored by changing the quarantine directory. Default is \Quarantine > **Important:** Mapped network drives and UNC network path names are not supported. - **Specify the maximum number of days to** **keep quarantine data____days** — Select this option to automatically delete quarantined data after a specified number of days. Defaults to 28 days. **(Agentless only)** - **Quarantine network share** — Quarantined files are stored on the specified network share. The share is mounted as CIFS, so the remote share must support this protocol. Read and write permissions are required. **Trellix MOVE AntiVirus** supports only windows share path for quarantine network share. Linux share path is not supported for quarantine network share. Enter the server name so that it can be resolved by the SVM. How this is entered depends on the environment and how the SVM is configured. - **Network domain and username** — Type the domain and user name used to access the specified share. - **Network password** — Type the network password. - **Confirm password** — Retype the network password. | | **SVM Server Communication (Multi-Platform only)** | **Scan server port** — Specifies the port number of the scan server of the SVM. The default port is 9053. > **Important:** Modifying the port value will restart the SVM service. | | **SVM Assignment (Multi-Platform only)** | **Assign SVM using SVM Manager** — Select to specify which SVM a group of virtual machines uses. - **SVM Manager Address** — Specify the address of the SVM Manager such as IP Address, host name, and FQDN. **Assign SVM manually —** Manually specify the SVM which a group of virtual machines should use. > **Note:** The specified port is used for client to communicate to the SVM. - **Port —** Type the prot number. Default is **8080**. - **IP Address, host name, or FQDN of SVM-1 —** Enter IP Address, host name, or FQDN of SVM-1, and the SVM 1 Port. Default is 9053. - **IP Address, host name, or FQDN of SVM-2 —** Enter IP Address, host name, or FQDN of SVM-2, and the SVM 2 Port. Default is 9053. | --- 39 ## Shared Cloud Solutions page (MOVE AntiVirus) Shared Cloud Solutions page allows you to configure settings for using **Threat Intelligence Exchange** and **Intelligent Sandbox** features. | **Option** | **Definition** | | --- | --- | | **Enable TIE** | **Enabled —** Select to enable **Threat Intelligence Exchange** so that it provides context-aware adaptive security for your virtual environment. TIE determines file and certificate reputation when a Portable Executable (PE) file is accessed on a managed endpoint. PE file includes these formats: .cpl, .exe, .dll, .ocx, .sys, .scr, .drv, .efi, .fon | | **TIE Non-PE Lookup** | **Enabled —** Select to enable Threat Intelligence Exchange to determine file and certificate reputation when a non-PE file is accessed on a managed endpoint. | | **Threat Intelligence Exchange (TIE)** | Select the reputation action from the drop-down list to scan by **Threat Intelligence Exchange**. Available options are: - **Known Malicious** — This is a malicious file - **Most Likely Malicious** — Almost certainly a malicious file - **Might be Malicious** — Appears to be a suspicious file - **Unknown** — Cannot make a determination at this time - **Might be trusted** — Appears to be a benign file - **Most likely trusted** — Almost certainly a trusted file | | **Advanced Threat Defense (ATD)** | Allows you to define the settings for use of **Intelligent Sandbox** feature. - **Submit files to ATD at and below** — Select the type of file to be scanned by Intelligent Sandbox from the drop-down list. Available options are: - **Most Likely Malicious** — Almost certainly a malicious file - **Unknown** — Cannot make a determination at this time - **Most Likely Trusted** — Almost certainly a trusted file - **Limit files size to ____ MB** — Specify the maximum size (in MB) of the file to send to Intelligent Sandbox. Defaults to 5 MB. | ## SVM Manager Settings page (MOVE AntiVirus) Configure these SVM Manager settings that allow you to set the OSS assignment and threshold warning. --- | **Option** | **Definition** | | --- | --- | | **SVM Manager Configuration** | SVM Manager configuration allows you to assign your SVM to your client systems based on the configurations specified in the **Trellix ePO - On-prem** server. - **SVM Port —** Specifies the port number of the SVM. The default port is 8443. - **Client Port —** Specifies the port number of client system. The default port is 8080. | | **SVM Autoscale Settings** | **Enable auto scaling of SVMs —** Enabling this option deletes all existing SVMs after the new SVMs are deployed and are ready to protect the client systems. It is also important to note that disabling the Enable auto scaling of SVMs option deletes all ready and standby SVMs, but the running SVMs continue to protect the client systems. - **Customize SVM Settings —** You can define the SVMs settings that the maximum number of clients would connect to SVM for protection, the number of standby SVMs needed, and the SVM capacity threshold level. - **Number of backup SVMs —** Type the number of ready SVMs required for protecting your client systems. Calculate the number of ready SVMs required for the maximum number of clients that would need protection at any time of the day. The standby SVMs are automatically deployed based on the backup SVM value. For example, if you specify the back up SVM as 4, 2 standby SVMs will be deployed automatically. - **Alarms —** Defines the threshold level for number of connected endpoints for each SVM. - **Threshold for number of connected endpoints (per SVM) Min____% Max____% —** Specify the SVM capacity threshold level. A warning appears when the number of connected endpoints is more than this level. Default value for minimum is 10 and maximum is 90. | | **Assignment Rules** | **Tag Assignment Rules —** Displays the list of assigned rules that have been created using their tag group for a set of endpoints to a selected SVM. - **Rule Name —** Specifies a unique user-friendly name that can help you to identify the rule. - **Client Tags —** Specifies the tag name of the endpoints, which have been assigned to the SVM. - **SVM Tags —** Specifies the tag name of the SVM, which has been assigned to the client. - **Infrastructure Groups —** Specifies the virtual infrastructure group, which has been created using the Menu → Automation → MOVE AntiVirus Deployment → Configuration → Infrastructure Details option. - **Minimum Threshold (%) —** Specifies the SVM's minimum capacity threshold level. - **Add —** Opens the Add/Edit SVM Tag Assignment Rule dialog box. You can configure these settings as needed. - **Rule name —** Type a unique user-friendly name that can help you to identify the rule. - **Select and add to client tags —** Select the tag names of the endpoints, which must be assigned to the SVM. - **Select and add to SVM tags —** Select the tag name of the SVM, which must be assigned to the client. - **Select and add to infrastructure groups —** Select the Default Group or an infrastructure group you have created using the Menu → Automation → MOVE AntiVirus Deployment → Configuration → Infrastructure Details option, so that SVM deployment can be done to specific virtual group in your organization. - **Customize SVM Settings —** This is the SVM assignment rule specific auto scale settings. Here, each rule can individual SVM deployment settings. You can define different rules which overwrite the common auto scale settings defined under SVM Autoscale Settings. - **Number of backup SVMs —** Type the number of standby SVMs needed. Default value is 2. - **Alarms —** Defines the threshold level for number of connected endpoints for each SVM. - **Threshold for number of connected endpoints (per SVM) Min_____% Max____% —** Specify the SVM capacity threshold level. A warning appears when the number of connected endpoints is more than this level. Default value for minimum is 10 and maximum is 90. - **Edit —** Opens the Add/Edit SVM Tag Assignment Rule dialog box for the selected SVM assignment rule to modify the settings as needed. - **Remove —** Removes the selected SVM assignment rule from the list. - **Move Up —** Moves the selected SVM assignment rule up. - **Move Down —** Moves the selected SVM assignment rule down. **IP Assignment Rules —** Displays the list of assigned rules that have been created using their IP address range for a set of endpoints to a selected SVM. - **Rule Name —** Specifies a unique user-friendly name that can help you to identify the rule. - **Client IP Address Range —** Specifies the IP address or a range of IP addresses of the endpoints, which have been assigned to the SVM. - **SVM IP Address Range —** Specifies the IP address or a range of the SVMs, which have been assigned to the client. - **Infrastructure Groups —** Specifies the virtual infrastructure group, which has been created using the Menu → Automation → MOVE AntiVirus Deployment → Configuration → Infrastructure Details option. - **Minimum Threshold (%) —** Specifies the SVM's minimum capacity threshold level. - **Add —** Opens the Add/Edit SVM IP Assignment Rule dialog box. You can configure these settings as needed. - **Rule Name —** Type a unique user-friendly name that can help you identify the rule. - **Client IP Addresses —** Type the IP address or a range of IP addresses of the endpoints, which must be assigned to the SVM. - **SVM IP Addresses —** Select the IP address or a range of the SVMs, which must be assigned to the client. - **Select and add to infrastructure groups —** Select the **Default Group** or an infrastructure group you have created using the **Menu → Automation → MOVE AntiVirus Deployment → Configuration → Infrastructure Details** option, so that SVM deployment can be done to specific virtual group in your organization. - **Customize SVM Settings —** This is the SVM assignment rule specific auto scale settings. Here, each rule can individual SVM deployment settings. You can define different rules which overwrite the common auto scale settings defined under **SVM Autoscale Settings**. **Assign SVM if no rule is defined for the above client** — Assigns the SVM to endpoints, if no rules are created for these endpoints. By default, this option is enabled. **Enable to get SVM preference from the same subnet** — Select your SVM Manager to assign the OSS from the same subnet. - **Default lease time____minutes** — Specifies the lease validity for the OSS assigned to endpoints. The default interval is 240 minutes. The load balancing depends on this value. - **Threshold for SVM Capacity Warning____%** — Specify the OSS capacity threshold level. A warning appears when the number of connected endpoints is more than this level. The default level is 90%. - **Number of backup SVMs —** Type the number of standby SVMs needed. Default value is 2. - **Alarms —** You can define the threshold level for number of connected endpoints for each SVM. - **Threshold for number of connected endpoints (per SVM) Min_____ % Max_____ % —** Specify the SVM capacity threshold level. A warning appears when the number of connected endpoints is more than this level. Default value for minimum is 10 and maximum is 90. - **Edit** — Opens the *Add/Edit SVM Assignment Rule* dialog box for the selected SVM Assignment Rule to modify the settings as needed. - **Remove** — Removes the selected SVM assignment rule from the list. - **Move Up** — Moves the selected SVM assignment rule up. - **Move Down** — Moves the selected SVM assignment rule down. | # SVM Settings page (MOVE AntiVirus) SVM Settings page allows you to configure SVM, enable Trellix GTI, and on-demand scan (ODS) scheduler. | **Option** | **Definition** | | --- | --- | | SVM Settings | **Concurrent on-demand scans** — Allows you to define on-demand scan settings per SVM. - **Restrict number of on-demand scans to____per SVM** — Limits the number of concurrent scans to be run on the SVM. Default value is 2. - **Restrict number of targeted on-demand scans to____per SVM** — Limits the number of targeted scans to be run on the SVM. Default value is 1. > **Important:** > > A high value reduces the scanning performance. **(Multi-Platform only)** - **Client load** — Select the load type, which specifies the workload and activities on clients. Available options are: - **Low (Higher number of clients)** — Lower file activity on the clients. SVM can handle more clients. Default number of clients is 300. - **Medium (Moderate number of clients)** — Medium file activity on the clients. Default number of clients is 250. - **High (Fewer number of clients)** — Higher file activity on the clients. SVM can handle fewer clients. Default number of clients is 150. - **Custom** — You can customize workload and activities for your clients. > **Note:** > > We recommend 250 because increasing this value might cause performance issues or scan delays or both. - **Alert me** — Allows you to set the alerts on number of client connections and scan time. - **When number of client connections to the SVM reaches____% —** Specify the SVM capacity level (in percentage) for number of client connections. A warning appears when the number of connected clients is more than this level. Default value is 90. - **When average scan time on the SVM exceeds____seconds —** Specify the SVM's average scan time (in seconds). A warning appears when the average scan time on the SVM exceeds this level. Default value is 10 seconds. | | **Trellix GTI** | **Enable Trellix GTI —** Select to enable Trellix GTI scan feature. - **Sensitivity level —** Select the sensitivity level of the Trellix GTI scan from the drop-down list. Available options are: - **Very Low — Trellix GTI** scans in low level. - **Low — Trellix GTI** scans in low level. - **Medium — Trellix GTI** scans in medium level. - **High — Trellix GTI** scans in high level. - **Very High — Trellix GTI** scans in high level. - **GTI timeout —** Enter a value ranging from 10 to 50 seconds. | | **Scanning Options** | - **Enable scanning inside archive files —** Select to enable scanning inside archived files. - **Enable scanning for MIME-encoded files —** Select to enable scanning for MIME-encoded files - **Enable scanning for potentially unwanted Programs —** Select to enable scanning for potentially unwanted programs. | | ODS Scheduler | Allows you to set on-demand scanning time on day-to-day and time-to-time basis. | | Performance | - **Limit the number of items that can exist in the server cache to____** — Enter the appropriate amount to limit the number of items that can exist in the server cache. Default value is 1000000. **(Agentless only)** - **Cache scan result of file size up to____MB** — Set the maximum file size (in MB) up to which scan results must be cached. Defaults to 40 MB. Files smaller than this threshold are copied completely to the Offload Scan Server and scanned. If the file is found to be clean, its scan result is cached based on its SHA-1 checksum for faster future access. Files larger than this size threshold are transferred in chunks that are requested by the offload scan server and scanned. | | SVM Configuration | **(Multi-Platform only)** - **SVM Manager port** — Specify the port number of SVM Manager system. The default port is 8443. **(Agentless only)** - **Hypervisor/vCenter server** — Type the valid IP address of the hypervisor or vCenter server. - **Protocol** — Select protocol type as http or https. - **vCenter/ESXi Port —** Specify the port number of the SVM. The default port is 443. - **Username —** Type the vCenter user name. - **Password —** Type the vCenter password. > **Important:** After you save and reopen an SVM policy, the vCenter password will appear blank. Even though it appears blank, it is saved in the policy settings. The password must be entered again to test connection settings. - **Confirm password —** Retype the vCenter password. - **SVM time zone —** Set the MOVE SVM time zone as required. We recommend that you set the MOVE SVM time zone, date, and time to match with your Trellix ePO - On-prem server. This is important for the on-demand scan to start at the exact time you have specified. - **NTP Server(s) —** Select Use default servers to use default NTP servers and select Use following servers to specify your own NTP servers. - **Test connection settings —** Click to test the connection to the hypervisor or vCenter server. | ## Schedule page (Targeted on-demand scan) Use this page to specify the schedule for targeted on-demand scan. | **Option** | **Definition** | | --- | --- | | Schedule status | Specifies whether the task runs according to its schedule. If the schedule is disabled, the task can only be run from the Systems → System Tree page by clicking **Actions → Targeted ODS [MOVE]**. | | **Schedule type** | Specifies the interval for running the targeted on‑demand scan task. Options include: - **Daily —** Specifies that the task runs every day, at a specific time, on a recurring basis between two times of the day, or a combination of both. - **Weekly —** Specifies that the task runs on a weekly basis. Such a task can be scheduled to run on a specific weekday, all weekdays, weekends, or a combination of them. You can schedule such a task to run at a specific time of the selected days, or on a recurring basis between two times of the selected days. - **Monthly —** Specifies that the task runs on a monthly basis. Such a task can be scheduled to run on one or more specific days of each month at a specific time. - **Once —** Starts the task on the time and date you specify. - **At System Startup —** Starts the task the next time you start the server. - **At logon —** Starts the task the next time you log on to the server. - **When idle —** Starts the task the next time the client goes idle. Once initiated, the task continues to run until it's complete, even if the system does not stay idle. > **Note:** After the task is run for the first time, it does not run again. - **Run immediately —** Starts the task immediately. - **Run on dialup —** Starts the task the next time that the managed system establishes a dialup connection to the network. | | **Effective period** | Specify the following: - **End date —** The date on which the task becomes unavailable to the scheduled interval. - **Start date —** The date on which the task is available to begin running at the scheduled intervals. | | **Start time** | Specify the time at which this task need to begin, and: - Whether to run the task only once at the Start time, or to continue running until a later time. You can also specify the interval at which the task runs during this interval. | | **Task runs according to** | Specifies whether the task schedule runs according to the **Local time on managed system** or **Coordinated Universal Time (UTC)**. | | **Options** | Specifies how the task behaves and the actions that can be taken if the task runs too long, or whether the task should run if it was missed. Options include: - **Enable randomization X hours Y minutes —** Specifies that this task runs randomly within the time you specify. Otherwise, this task starts at the scheduled time regardless if other client tasks are scheduled to run at the same time. - **Run missed task X minute delay —** Runs the task after a user-configured number of minutes once the managed system is restarted. - **Stop the task if it runs for X hours Y minutes —** Stops the task when it has run for a user-configured amount of time. | | **Next** | Navigates to the **Summary** page. | | **Save** | Saves and runs the targeted on-demand scan for the selected VMs. | | **Cancel** | Navigates to the current page. | # Summary page (Targeted on-demand scan) Review the details of the task assignment before saving it. | **Option** | **Definition** | | --- | --- | | Name | Displays the name you provided for the task assignment. | | Description | Displays any description you provided for the task assignment. | | Type | Displays the type of task chosen for this assignment. | | Schedule | Displays the schedule information provided for this task assignment. | | Lock task inheritance | Displays whether task inheritance was locked for this task assignment. | | Back | Navigates to the previous page. | | Save | Saves the assignment. | | Cancel | Navigates to the current page. |