--- title: "MOVE AntiVirus 4.10.x Product Guide" slug: "move-antivirus-4-10-x-product-guide" updated: 2026-08-06T10:54:16Z published: 2026-08-06T10:54:16Z canonical: "docs.trellix.com/move-antivirus-4-10-x-product-guide" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # MOVE AntiVirus 4.10.x Product Guide Last Updated: August 29, 2024 ### Overview Trellix Management for Optimized Virtual Environments AntiVirus (Trellix MOVE AntiVirus) is an anti-virus solution for virtual environments. It provides protection and optimal performance for your organization without having to install an anti-virus application on every virtual machine. Trellix MOVE AntiVirus detects threats and then protects your environment based on settings that you configure. You can configure the software as a standalone product, or use Trellix ePolicy Orchestrator - On-premises to configure, manage, and enforce your policies. After the configuration, you can use queries and dashboards to track activity and detections. The software includes two deployment options, **Multi-platform** and **Agentless**. Both options provide consistent protection and can be managed and reported through Trellix ePO - On-prem. ### Key features Trellix MOVE AntiVirus features enable you to secure and protect your enterprise systems without compromising on performance. The key features are listed below. > [!NOTE] > Note: > > Each feature that is listed below is available either in both Multi-platform and Agentless deployment or only one. You can know about the availability of the feature by checking the column Multi-platform and Agentless in the table below. | **Feature** | **Description** | **Multi-platform** | **Agentless** | | --- | --- | --- | --- | | Centralized management | Trellix MOVE AntiVirus integrates fully into Trellix ePO - On‑prem for automated security reporting, monitoring, deployment, and policy administration. | Yes | Yes | | Data Center visibility | vSphere Connector, part of the Data Center Security suite, provides a complete view into virtual datacenters and imports key properties like servers, hypervisors, and VMs through Trellix ePO - On‑prem. | Yes | Yes | | On-access scanning | Examine files as they are accessed, providing continuous, real-time detection of threats. | Yes | Yes | | On-demand scanning | Examine all files on VMs to find potential threats any time or on a schedule. | Yes | Yes | | Targeted on-demand scanning | Optimize file scanning for files where the previous scanning is timed out for reasons such as large file size, file structure, and file composition. | Yes | Yes | | SVM Manager | Automatically assign the SVM to Multi-platform clients for simplified administrative management, monitoring the health of SVMs, and load-balancing of SVMs. | Yes | No | | SVM autoscaling | The SVMs automatically scale up and down depending on the number of endpoints connected. Define the number of backup SVMs that are ready to protect your client systems. Calculate the number of ready SVMs required for the maximum number of clients that need protection at any time of the day. The standby SVMs are automatically deployed based on the backup SVM value. | Yes | No | | Scan diagnostics | Run the scan diagnostic tool to easily find frequently scanned files, extensions, and VMs, then use the results to exclude them from being scanned, improving performance. | Yes | Yes | | RAM disk for scanning | RAM disk is used by the OSS for file scanning and it significantly reduces the disk I/O on the offline scan server. By default, RAM disk is enabled in the Trellix ePO - On-prem server. RAM disk is created by the OSS and it improves the OSS performance by enhancing the scan time. | Yes | No | | Global Threat Intelligence | Determine a file's reputation risk score with seamless integration of TIE, Trellix ePO - On-prem, and Trellix MOVE AntiVirus. | Yes | No | | Trellix Intelligent Sandbox integration | Protect your client systems and network against malware and Advanced Persistent Threats (APTs) with the multi-level threat detection capabilities of Intelligent Sandbox. | Yes | No | ### Working Trellix MOVE AntiVirus detects, resolves, and logs information about detected threats. The software is installed on Trellix MOVE AntiVirus Security Virtual Machine (SVM) to perform these tasks. The software includes two deployment options, **Multi-platform** and **Agentless**. Both options provide consistent protection and are managed and reported on by Trellix ePO - On-prem. ## Multi-platform Multi-platform is an agent-based deployment option that offloads all scanning to a dedicated Security Virtual Machine (SVM) that runs the Trellix® Endpoint Security software. Guest VMs are no longer required to run anti-virus software locally, which improves the performance for anti-virus scanning, and increases VM density per hypervisor. > [!NOTE] > Note > > In the workflow mentioned below, the assumption is that Trellix Threat Intelligence Exchange and Trellix Intelligent Sandbox are enabled. 1. The file enters the network, where Trellix MOVE AntiVirus is installed. 2. Trellix MOVE AntiVirus client looks for the file reputation in the local cache of the VM. 3. When the search provides no results, then the file is provided to the Security Virtual Machine (SVM) to check the file reputation in the global cache. 4. If the search in local and global cache provides no results, then the file is provided to the Threat Intelligence Exchange for inspection, which internally requests the Global Threat Intelligence for the file reputation. 5. If the file's reputation is not available in Global Threat Intelligence, then the file is sent to Intelligent Sandbox for scan. 6. As the scan by Intelligent Sandbox is a time-consuming process, the file is also sent to the AMCore engine for scanning. 7. Intelligent Sandbox sends the results to the SVM after completion of the scan. > **Note** > > If Threat Intelligence Exchange and Intelligent Sandbox are not enabled, then the file is sent for scanning after step 3 and therefore, steps 4, 5, 6, and 7 are not relevant. 1. If the file is malicious, then you can check the Threat Event Log in Trellix ePO - On‑prem to see the results. ![Red architecture diagram showing MOVE AntiVirus deployment flow — client VM and hypervisor on the left, Security Virtual Machine (SVM) and MOVE components in the VM, dotted data flow to TIE server and ATD server, Administrator and McAfee ePO on the right, labeled numbered steps illustrating the scanning and reputation lookups across the Data Exchange Layer.](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/trellix_move_antivirus_4.10.x_product_guide_8-5-2026_page_0009_img_01.png?sv=2026-02-06&spr=https&st=2026-11-20T14%3A35%3A02Z&se=2026-11-20T15%3A35%3A02Z&sr=c&sp=r&sig=sIjyJXQieKv0TSjVTFoHqeM1S9ODklQ0KvdrMPT4aVg%3D) ## Agentless This deployment method integrates with VMware NSX-T Manager. It protects your virtual environment from malware without a Trellix Agent for easy deployment and setup. This deployment provides virus protection for VMs on the hypervisor. 1. The virus enters the network and tries to infect a VM, where Trellix MOVE AntiVirus is installed. 2. The Security Virtual Machine (SVM) is notified about the new file in the network through the third-party agents. After receiving the file information, the SVM initiates the search for the same file in the global cache. 3. When the search in global cache provides no results, then the SVM requests Trellix GTI for the file's reputation. 4. If the file's reputation is not available in Trellix GTI, then the SVM initiates a file scan. 5. If the file is malicious, then you can check the Threat Event Log in Trellix ePO - On-prem to see the results. ![Diagram illustrating Trellix MOVE AntiVirus deployment flow. Shows a hypervisor with client software and a Security Virtual Machine (SVM) running MOVE AntiVirus and ENS; arrows numbered 1–5 indicate steps: 1) infection attempt on VM, 2) SVM notified and searches global cache, 3) SVM requests Trellix GTI for file reputation, 4) SVM initiates file scan if reputation unavailable, 5) Threat Event Log entry visible in Trellix ePO on-prem. Also shows McAfee ePO/Administrator and Global Threat Intelligence components connected to the SVM.](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/trellix_move_antivirus_4.10.x_product_guide_8-5-2026_page_0010_img_01.png?sv=2026-02-06&spr=https&st=2026-11-20T14%3A35%3A02Z&se=2026-11-20T15%3A35%3A02Z&sr=c&sp=r&sig=sIjyJXQieKv0TSjVTFoHqeM1S9ODklQ0KvdrMPT4aVg%3D) ## Configuring Trellix MOVE AntiVirus Configure Trellix MOVE AntiVirus settings to prevent malware access, keep your protection up to date, and scan for malware on client systems. Trellix MOVE AntiVirus provides two types of file scanning, on-access and on-demand. You can customize the scan settings based on your demands and requirements. ## Multi-platform components Each component performs specific functions to keep your environment protected. **ePolicy Orchestrator - On-premises** — A management platform that communicates with the Trellix Agent, manages the Multi-platform configuration, and provides reports on malware discovered in your virtual environment. **Hypervisor** — A virtual operating platform that allows multiple operating systems to run concurrently on a hosted system and manages the execution of the guest operating system. **Trellix Agent** — A client-side component that communicates with Trellix ePO - On-prem, applies policies to each VM, and deploys the Trellix MOVE AntiVirus client. **Trellix MOVE AntiVirus client** — The client software that allows VMs to work with the Security Virtual Machine (SVM) for file scanning and malware detection. Enforces actions on the client when a threat is detected. **Trellix MOVE AntiVirus SVM** — The Security Virtual Machine VM that provides offloaded scanning support for VMs, minimizing the performance impact on virtual desktops. **SVM Manager** — A load balancing component that automatically assigns SVM to Multi-platform clients based on configurable parameters like scan server load, Trellix ePO - On-prem tags, and IP address ranges. **Trellix MOVE AntiVirus Meta Package extension** — The product extension that provides policies and controls for configuring and managing the self-protection for the product's command line interface. You can enable events and logging details of the Trellix MOVE AntiVirus client through Trellix ePO - On-prem. It provides policies and controls for configuring and managing components such as SVM Manager, SVM Settings, on-access and on-demand scanning, and shared cloud solutions. It provides the configurations required for managing the Trellix MOVE AntiVirus SVM through Trellix ePO - On-prem. **Trellix ENS** — Anti-virus software that enables anti-virus scanning for the SVM virtual machine and communicates with the Trellix GTI servers. **vSphere Connector** — A Data Center Connector that helps you discover and import your virtual infrastructure using Trellix ePO - On-prem. You can also view the virtualization properties and protection status of your virtual machines, and manage them. # Agentless components Each component performs specific functions to keep your environment protected. **ePolicy Orchestrator - On-premises** — A management platform that allows you to configure policies to manage Agentless configuration and provides reports on malware discovered in your virtual environment. **Security Virtual Machine (SVM)** — The Trellix MOVE AntiVirus service package that provides anti-virus protection for VMs and communicates with the loadable kernel module on the hypervisor, Trellix ePO - On-prem, and the Trellix GTI servers. The SVM is the only system directly managed by Trellix ePO - On-prem. Endpoint Security for Linux Threat Prevention, Trellix Agent, and Trellix MOVE AntiVirus (Agentless) are pre-installed. **File Quarantine** — Remote quarantine system, where quarantined files are stored on an administrator-specified network share. **Trellix GTI (Global Threat Intelligence)** — A comprehensive, real-time, cloud-based threat intelligence service that classifies suspicious files that are found on the file system. When the real-time malware defense detects a suspicious program, it sends a DNS request for analysis to a central database server hosted by Trellix Advanced Research Center. **VMware vCenter** — Console that manages the ESXi servers, which host the guest VMs that require protection. **Hypervisor (ESXi)** — A virtual operating platform that allows multiple operating systems to run concurrently on a hosted system and manages the execution of the guest operating systems. ESXi is an embedded hypervisor for servers that runs directly on server hardware without requiring an extra underlying operating system. **VMware NSX-T Manager** — Console that allows you to configure, provision, and automate the protection on the endpoints in a datacenter. **Virtual Machines (VMs)** — Completely isolated guest operating system installations in a normal host operating system that support both virtual desktops and virtual servers. ## Importance of creating a security strategy Protecting your virtual systems from malware requires a well-planned strategy: define threat prevention and detection, response to threats, and ongoing analysis and tuning. ### Prevent — Avoiding threats Define your security requirements to make sure that your data sources are protected. Then, develop an effective scan strategy to stop intrusions before they gain access to your environment. Configure these features to prevent intrusions: - **Self-Protection —** (Multi-platform only) One of the first things that malware tries to do during an attack is to disable your system security software. Configure Self-Protection for Trellix MOVE AntiVirus (Multi-platform) to prevent Trellix MOVE AntiVirus service, files, and registries from being stopped or changed. - **Common scan options —** Enable Trellix MOVE AntiVirus and configure options that apply to all scans, including: - (Multi-platform) Quarantine location and the number of days to keep quarantined items before automatically deleting them - (Agentless) Quarantine network share where the quarantined files are stored - **Scan Diagnostics** client task — Run the scan diagnostic tool or use Trellix ePO - On-prem to calculate and display frequently scanned files, extensions, processes, and VMs. You can use the results to exclude the items from being scanned. ## Detect — Finding threats Develop an effective strategy to detect intrusions when they occur. Configure these features to detect threats: - **On-Access Scan —** Scan for threats as files are read from or written to disk. - **On-Demand Scan —** Run immediate and scheduled scans, including scanning for malware-related registry entries that weren't previously cleaned. - **Targeted On-Demand Scan —** Select a system or a group of systems from the System Tree where to initiate the on-demand scan. ## Respond — Handling threats Use product log files, automatic actions, and other notification features to determine the best way to handle detections. - **Actions —** Configure what happens in response to a detection. - **Alerts —** Specify how Trellix MOVE AntiVirus notifies you when detections occur, including alerting options and logging. ## Tune — Monitoring, analyzing, and fine-tuning your protection Monitor and analyze your configuration to improve system and network performance, and enhance virus protection, if needed. Use these tools and features: - **Queries, dashboards, and server tasks** (Trellix ePO - On-prem) — Monitor scanning activity and detections. - **Log files —** View a history of detected items. Analyzing this information might reveal that you must enhance your protection or change the configuration to improve system performance. - **Scan policies —** Analyze log files or queries and change policies to increase performance or virus protection, if needed. For example, you can improve performance by configuring exclusions, high- and low-risk process scanning, and disabling scan on write. - **Scan Diagnostics** reports — Run and view these scan diagnostic queries: - Top 10 Scanned File Extensions for each SVM - Top 10 Scanned Files for each SVM - Top 10 Scanned Virtual Machines for each SVM - (Multi-platform only) Top 10 Scanned Processes for each SVM ## Trellix ePO - On-prem features leveraged by Trellix MOVE AntiVirus Trellix MOVE AntiVirus leverages these features in the Trellix ePO - On-prem environment. | **Trellix ePO - On-prem feature** | **Trellix MOVE AntiVirus** | | --- | --- | | Policies | Adds predefined policies to the Policy Catalog. | | Client tasks | Adds predefined client tasks to the Client Task Catalog. | | Dashboards and monitors | Adds predefined dashboards and monitors. | | Permission sets | Adds a Trellix MOVE AntiVirus permission group to each permission set. | | Queries and reports | Adds: - Predefined queries to the Query list. Query names include Multi-platform, Agentless, and SVM name for easier filtering. - Predefined Result Types and Properties for creating and narrowing the scope of custom queries. | | Server tasks | Adds predefined server tasks to the Server Tasks list in Automation. | | Threat Event Log | Adds Trellix MOVE AntiVirus events that you can filter and view. | ## About the Trellix ePO - On-prem system tree The System Tree is a graphical representation of how your managed network is organized. Trellix ePO - On-prem enables you to automate and customize system organization. The structure that you put in place affects how security policies are inherited and enforced throughout your environment. You can perform these Trellix MOVE AntiVirus functions from the System Tree. | **Function** | **Category** | **Description** | | --- | --- | --- | | Policies | MOVE AntiVirus Common 4.10.x → Options | Includes policy setting to prevent Trellix MOVE AntiVirus service, files, and registries from being stopped or modified. You can also specify the settings required for events and logging for Multi-platform. | | | MOVE AntiVirus 4.10.x → Options | Configures settings that apply to both on-access and on-demand scans. | | | MOVE AntiVirus 4.10.x → On Access Scan | When a threat is detected, the on-access scanner responds based on the configurations in this policy. | | | MOVE AntiVirus 4.10.x → On Demand Scan | When a threat is detected, the scanner responds based on the configurations in this policy. | | | MOVE AntiVirus 4.10.x → Shared Cloud Solutions (Multi-platform only) | The Shared Cloud Solutions policy determines whether files and certificates are blocked or allowed on your systems based on reputation levels. | | | MOVE AntiVirus 4.10.x → SVM Manager Settings (Multi-platform only) | Create and assign a policy that specifies which SVM a virtual infrastructure group uses. You can define the SVM auto scale settings, so that the SVM deployment starts automatically depending on the number of clients connecting to the SVM for protection. | | | MOVE AntiVirus 4.10.x → SVM Settings | Specifies the scanning settings and performance configurations for the SVM. | | Client Tasks (Multi-platform) | Restore from Quarantine | Performs actions on quarantined items. For example, you can restore a quarantined item after downloading a later version of the DAT that contains information that cleans the threat. | | | Targeted On-Demand Scan | Optimizes file scanning for files where the previous scan timed out for reasons such as large file size, file structure, and file composition. | | | Scan Diagnostics | Run the scan diagnostic task to easily find frequently scanned files, extensions, and VMs, then use the results to exclude these items from being scanned. | | | Check SVM Assignment | Checks whether an SVM is assigned to the client system to protect it. | ## Using client tasks with Trellix MOVE AntiVirus Use client tasks to automate system management in your Trellix ePO - On‑prem environment. For example, you can configure a client task to deploy product updates, run a diagnostic scan, or run an on‑demand scan. Depending on your permissions, you can use predefined client tasks as is, edit them, or create custom client tasks. Trellix MOVE AntiVirus adds these predefined client tasks to the Client Task Catalog. | **Function** | **Category** | **Description** | | --- | --- | --- | | Client Tasks (Multi-platform) | Restore from Quarantine | Performs actions on quarantined items. For example, you can restore an item after downloading a later version of the DAT that contains information that cleans the threat. | | | Targeted On-Demand Scan | Optimizes file scanning for files where the previous scanning is timed out for reasons such as large file size, file structure, and file composition. | | | Scan Diagnostics | Run the scan diagnostic task to easily find frequently scanned files, processes, extensions, and VMs, then use these results to exclude them from being scanned. A good set of exclusions improves the performance of the virtual infrastructure. | | | Check SVM Assignment | Checks whether an SVM is assigned to the client system to protect it. | | | Check SVM Connectivity | Checks the connectivity status between an SVM and the client system. | | | Check SVM Manager Connectivity | Checks the connectivity status between the SVM Manager and the client system. | | | Perform EICAR Test | Performs an EICAR test on the client system. | | Client Tasks (Agentless) | Scan Diagnostics | Run the scan diagnostic task to easily find frequently scanned files, extensions, and VMs, then use the results to exclude these items from being scanned. | For information about creating and using client tasks and the Client Task Catalog, see the Trellix ePO - On-prem documentation. ## Using policies in Trellix ePO - On-prem Policies enable you to configure managed products and apply the configuration to systems in your network, all from the Trellix ePO - On-prem console. Policies are collections of settings that you create, configure, and apply, then enforce. Most policy settings correspond to settings that you configure for the Trellix MOVE AntiVirus client systems. Other policy settings are the primary interface for configuring and deploying the Trellix MOVE AntiVirus SVM and its components. Trellix MOVE AntiVirus adds these categories to the Policy Catalog. ### Trellix MOVE AntiVirus categories | **Category** | **Description** | | --- | --- | | Options | Configures the Quarantine Manager options that apply to both on-access scanner and on-demand scanner. Also, specifies the SVM assignment details for Multi-platform. | | On Access Scan | Examines files on the computer as the user accesses them, and provides continuous, real-time detection of threats. | | On Demand Scan | Configures the on-demand scan settings for the preconfigured scans that run on the SVM. | | Share Cloud Solutions (Multi-platform only) | Enables you to specify that files and certificates with specific reputations are allowed to perform certain scan actions, as specified by scan rules. | | SVM Manager Settings (Multi-platform only) | Configures the SVM Manager and autoscale settings required for SVM deployment and management. | | SVM Settings | Specifies settings that apply to SVM configuration, scanning options, on-demand scan configurations required for SVM, and scan performance. | **Trellix MOVE AntiVirus Common categories** | **Category** | **Description** | | --- | --- | | Options | Allows you to configure the settings to defend files, services, and registry keys on virtual machines and to log events and alerts. | In each category, these predefined policies are available: **Trellix MOVE AntiVirus predefined policies** | **Policy** | **Description** | | --- | --- | | McAfee Default | Defines the default policy that takes effect if no other policy is applied. You can duplicate this policy, but you can't delete or modify it. | | My Default | Specifies predefined settings for the category. | You can use predefined policies as is, edit the My Default policies, or create custom policies. For information about creating and using policies and the Policy Catalog, see the Trellix ePO - On‑prem documentation. ## Create a policy Policies allow you to describe threat scanning behavior for specific virtual machines. --- ### Before you begin: - You installed the Trellix MOVE AntiVirus extension on the Trellix ePO - On-prem server. - By default, policies created in Trellix ePO - On-prem are not assigned to any groups or systems. When you create a policy, you add a custom policy to the Policy Catalog. You can create policies before or after a product is deployed. Task 1. Log on to Trellix ePO - On-prem as an administrator. 2. Select Menu → Policy → Policy Catalog, then select MOVE AntiVirus 4.10.x or MOVE AntiVirus Common 4.10.x from the Product drop-down list. 3. Click New Policy. 4. On the Create a new policy dialog box, configure the options, as required, then click OK. 5. Click the new policy that is created, then configure the policy options, as required. 6. Click Save. 7. In the Assigned Policy list, select the policy you created. 8. Click Save. 9. To apply the policy immediately, send wake-up agent call. 10. You installed the Trellix MOVE AntiVirus extension on the Trellix ePO - On-prem server. The policies are not modified on client systems until the next agent-server communication that includes a Collect and Send Properties operation. This can be initiated from the agent on the client, or by sending wake-up agent call from Trellix ePO - On-prem. ## Policy assignment (Agentless) VM-based scan configuration is enabled by default. The Trellix ePO - On-prem administrator can enforce unique scan policies with exclusion to different groups, resource pool, or specific virtual machines protected by Trellix MOVE AntiVirus SVM on a hypervisor, even when Trellix Agent is not deployed to the client systems. The on-access and on-demand scan policies can be applied to SVMs or to a specific virtual machine, or group. With VM-based scan configuration enabled by default, all VMs are protected by the on-access and on-demand scan policies, which are assigned to VM or group. The on-access and on-demand scan policies can be assigned to the system using system-based assignment or rule-based assignment in Trellix ePO - On-prem. ## Enable or disable policy collector You can enable the Policy Collector to update the target SVMs with the latest on-access and on-demand scan policies. Follow the steps below to enable or disable Policy Collector: 1. Login to Trellix ePO - On-prem. 2. Go to MOVE AntiVirus Deployment page. 3. In the Configuration tab, expand Agentless and then select Server Settings. 4. Select Edit. 5. Enable or disable Policy Collector. > Note > > The Policy Collector dialog box appears. 1. Select Yes. 2. Select Save. You have enabled or disabled Policy Collector successfully. ## Update SVMs with scan policies You can run the policy collector to update the target SVMs with the latest on-access and on-demand scan policies. The policies and updates are enforced to SVM in the default policy collection interval, which is 60 minutes. > Tip > > **Best practice:** Specify the policy collection interval for your environment, as needed. 1. Select Menu → Automation → MOVE AntiVirus Deployment → Configuration → Server Settings. 2. Click Run next to Run policy collector. The Policy collection completed successfully message appears when policies are successfully collected. 3. Send wake-up agent call to the target SVMs. > Important > > You can change the policy enforcement interval by navigating to Menu → Automation → MOVE AntiVirus Deployment → Configuration → Server Settings → Edit. You can also view the task log for policy collection (MOVE AntiVirus:Policy collection task) by navigating to Menu → Automation → Server Task Log. The policy collection task log is updated in the default policy collection interval, which is 60 minutes. ## Assign an on-access scan policy to a group in Trellix ePO - On-prem You can assign an on-access scan policy to a group in Trellix ePO - On-prem. This is applicable only for NSX-T environment. 1. Log on to Trellix ePO - On-prem as an administrator. 2. In the System Tree, select the group containing the virtual machines where you want to apply the policy. 3. Assign the policy to the group. For more information, see Assign a policy topic. 4. Log on to the NSX-T console as an administrator. 5. Click Security → Endpoint Protection Rules → Rules → Add policy. 6. Apply the same security policy to the NSX security group and wait for the policy reflection. > **Note** > > Make sure that the same set of client VMs are part of Trellix ePO - On‑prem group and NSX security group. 1. Run the policy collector in Trellix ePO - On‑prem. 2. Send wake‑up agent call to the SVMs, which these client VMs are protected with. ## Configuring policies You can configure the Trellix MOVE AntiVirus client and SVM behavior with policy settings. | **Policies for client** | **Policies for SVM** | | --- | --- | | - Which SVM a client uses. - When files are scanned. - Which files and programs to exclude from scanning. - Where to send alerts. - What to do when a threat is found. - How to handle quarantined files. - How the SVM operates. | - Maximum size of the server cache. - The number of concurrent scans that an SVM policy can support. - Which port the SVM listens to for scan requests from clients. - The number assigned to a log file and size. - Which types of files to scan. - Trellix GTI sensitivity level. - On‑demand and on‑access scan settings. | ## Configuring permissions sets *A permission set is a group of access rights granted to a user account for specific features of a product. Permission sets only grant permissions — they never remove a permission.* All permissions to all products and features are assigned automatically to global administrators. Other users must have permission assigned manually. Global administrators can assign existing permission sets when creating or editing user accounts and when creating or editing permission sets. For more information about permission sets, see the product documentation for your version of Trellix ePO - On‑prem. ### Trellix MOVE AntiVirus permission set The Trellix MOVE AntiVirus software adds sections to the permission sets including the MOVE AntiVirus SVM Manager role. Global administrators must grant permissions to users for the MOVE AntiVirus Common, MOVE AntiVirus Deployment, MOVE AntiVirus General, and MOVE AntiVirus Policy Permission sections, because no permissions are granted by default. | **Permission section** | **Permission set** | **Description** | | --- | --- | --- | | MOVE AntiVirus Common | View policy and task settings | User can view the policy and task settings that are available in the MOVE AntiVirus Common extension in Trellix ePO - On-prem. | | View and change policy and task settings | User can view and edit the policy and task settings that are available in the MOVE AntiVirus Common extension in Trellix ePO - On-prem. | | MOVE AntiVirus Deployment | View/Edit Deployment MOVE AntiVirus Configuration | User can view and edit the MOVE AntiVirus Deployment configuration details in Trellix ePO - On-prem. | | MOVE AntiVirus General | Run System Tag Info Command | This permission is used by the SVM Manager to fetch the system tag information, which is configured and assigned to the client systems. | | MOVE AntiVirus Policy Permission | View policy and task settings | User can view the policy and tasks settings that are available in the MOVE AntiVirus extension in Trellix ePO - On-prem. | | View and change policy and task settings | User can view and edit the policy and tasks settings that are available in the MOVE AntiVirus extension in Trellix ePO - On-prem. | ## Other required permissions The global administrator must give Trellix ePO - On-prem permissions to handle other areas that work with Trellix MOVE AntiVirus including queries, dashboards, and the Threat Event Log. | **For these features...** | **These permissions sets are required** | | --- | --- | | Dashboards | Dashboards, Queries and Reports | | Queries | Queries and Reports | | Policies | System Tree access, Policy Assignment Rules | | Events on virtual machines | Systems, System Tree access, Threat Event Log | ## Using permission sets A permission set specifies all permissions that apply to one object and controls users' level of access to features. Trellix MOVE AntiVirus adds a permission group MOVE AntiVirus SVM Manager to each permission set. Permission groups define the access rights to the features. Trellix ePO - On-prem grants all permissions for all products and features to global administrators. Administrators then assign user roles to existing permission sets or create permission sets. | **Feature** | **Required permissions** | | --- | --- | | Automatic responses | Automatic Responses, Event Notifications, plus any feature-specific permissions depending on the feature used (such as System Tree or queries). | | Client tasks | - Trellix MOVE AntiVirus (Multi-platform) Tasks - Trellix MOVE AntiVirus (Agentless) Tasks | | Dashboards and monitors | Dashboards | | Policies | Trellix MOVE AntiVirus Policy | | Queries | Queries and Reports | | Server tasks | Server tasks | | System Tree | Systems, System Tree access | | Threat Event Log | Systems, System Tree access, Threat Event Log | ## Configure permission sets Update the read/write permissions assigned to the user roles defined for your Trellix ePO - On-prem environment. 1. Log on to Trellix ePO - On-prem as an administrator. 2. Select Menu → User Management → Permission Sets. 3. Select a user role from the Permission Sets list. 4. Next to any Trellix MOVE AntiVirus permission, click Edit. 5. Select the permission level, as needed. 6. Click Save. ## Configuring Trellix MOVE AntiVirus settings Configure settings that apply to all components and features of Trellix MOVE AntiVirus in the MOVE AntiVirus Common 4.10.x and MOVE AntiVirus 4.10.x extensions. ### Protect Trellix MOVE AntiVirus resources (Multi-platform) One of the first things that a malware tries to do during an attack is to disable your system security software. Configure Self-Protection in the Options policy under MOVE AntiVirus Common 4.10.x to prevent Trellix MOVE AntiVirus services, files, and registries from being stopped or modified. 1. Log on to Trellix ePO - On-prem as an administrator. 2. Select Menu → Policy → Policy Catalog, then select MOVE AntiVirus Common 4.10.x from the Product list. 3. From the Category list, select Options. 4. Click the name of an editable policy. 5. Under Self-Protection, enable these options. | **Options** | **Description** | | --- | --- | | Enable Self-Protection | To prevent Trellix MOVE AntiVirus services and files, registries from being stopped or modified. | | Enable Self-Protection for MOVE CLI | To protect the command-line utility from being accessed by unauthorized users. | 6. Click Save. ## Configure logging settings (Multi-platform) Configure Trellix MOVE AntiVirus logging in the Options policy under MOVE AntiVirus Common 4.10.x to retrieve the software deployment and configuration details. 1. Log on to Trellix ePO - On-prem as an administrator. 2. Select Menu → Policy → Policy Catalog, then select MOVE AntiVirus Common 4.10.x from the Product list. 3. From the Category list, select Options. 4. Click the name of an editable policy. 5. Configure these settings on the page. | **Options** | **Actions** | | --- | --- | | Events | - Log events to Windows Application log — Select to display alerts in the local system's Windows Event Log. - Send events to McAfee ePO — Select to display alerts in the Trellix ePO - On-prem Threat Event Log. | | Logging | - Rotate log file content when the file size reaches_____MB — Type the maximum size for a log file to rotate it. Default size is 10 MB. | 6. Click Save. ## Configuring exclusions Trellix MOVE AntiVirus enables you to fine-tune your protection by specifying items to exclude from scanning. For example, you might need to exclude some file types to prevent a scanner from locking a file used by a database or server. A locked file can cause the database or server to fail or generate errors. | **For this scan type...** | **Specify items to exclude** | **Where to configure** | **Use wildcards?** | | --- | --- | --- | --- | | On-access scan | Files, file types, folders, and process exclusions | On Access Scan policy | Yes | | On-demand scan | Files, file types, and folders | On Demand Scan policy | Yes | Every item in exclusion lists is mutually exclusive. Each exclusion is evaluated separately from the others in the list. > **Note** > > To exclude a folder on Windows systems, append a backslash (\) character to the path. To exclude a folder on Linux systems, append a forward slash (/) character to the path. ### Path exclusions The Trellix MOVE AntiVirus product allows you to fine-tune the list of file types scanned including individual files, folders, and disks. You might need these exclusions because the scanners might scan and lock a file when that file is being used by a database or server. This might cause the database or server to fail or generate errors. > **Note** > > When specifying the path exclusions, wildcards are supported. (Windows system) All folder exclusion must append a backslash (\). For example, C:\temp\test\ If you do not append a backslash (\) for the specified path, the file test is excluded. (Linux system) All folder exclusion must append a forward slash (/). For example, /temp/test/ If you do not append a forward slash (/) for the specified path, the file test is excluded. **Process exclusions (Multi-platform)** The Trellix MOVE AntiVirus product allows you to fine-tune the list of process types scanned including processes. You might need these exclusions because the scanners might scan and lock a process when that process is being used by a database or server. This might cause the database or server to fail or generate errors. > **Note** > > When specifying the process exclusions, wildcards are not supported. **Wildcards in exclusions** You can use wildcards to represent characters in exclusions for files, folders, and detection names. **Valid wildcards** | **Wildcard character** | **Name** | **Represents** | | --- | --- | --- | | ? | Question mark | Single character This wildcard applies only if the number of characters matches the length of the file or folder name. For example: The exclusion W?? excludes WWW, but doesn't exclude WW or WWWW. (Windows) This wildcard matches one character. For example: ?:\ABC matches C:\ABC and D:\ABC (Linux) This wildcard matches one character. For example: /?DEF/ matches /CDEF/ | | * | Asterisk | Multiple characters, except backslash (\). (Windows) This wildcard matches zero or more characters. For example: C:\ABC\*\XYZ matches C:\ABC\DEF\XYZ and C:\ABC\XYZ | | ** | Double asterisk | Zero or more of any characters, including backslash (\). (Windows system) This wildcard matches zero or more characters. For example: C:\ABC\**\XYZ matches C:\ABC\DEF\XYZ and C:\ABC\XYZ | (Windows) Wildcards can appear in front of a backslash (\) in a path. For example, C:\ABC\*\XYZ matches C:\ABC\DEF\XYZ. (Linux) Wildcards can appear in front of a forward slash (/) in a path. For example, ?DEF matches /CDEF. ### Root-level exclusions (Multi-platform) Trellix MOVE AntiVirus requires an absolute path for root-level exclusions. This means that you can't use leading \ or ?:\ wildcard characters to match drive names at the root level. Instead, you can use leading **\ wildcard characters in root-level exclusions to match drives and subfolders. For example, **\test\ matches the following: - C:\test\ - D:\test\ - C:\temp\test\ - D:\foo\test\ ### Root-level exclusions (Agentless) #### For Windows systems Trellix MOVE AntiVirus requires an absolute path for root-level exclusions. You can use leading ?:\ wildcard characters in root-level exclusions to match drives and subfolders. For example, ?:\test\ matches the following: C:\test\ D:\test\ ### System variables (Multi-platform) These are the Windows system variables that are supported for Multi-platform. | System variable | Path | | --- | --- | | %ALLUSERSPROFILE% | C:\ProgramData | | %CommonProgramFiles% | C:\Program Files\Common Files | | %CommonProgramFiles(x86)% | C:\Program Files (x86)\Common Files (only in 64-bit version) | | %CommonProgramW6432% | C:\Program Files\Common Files (only in 64-bit version) | | %ProgramData% | %SystemDrive%\ProgramData | | %ProgramFiles% | %SystemDrive%\Program Files | | %ProgramFiles(x86)% | %SystemDrive%\Program Files (x86) (only in 64-bit version) | | %ProgramW6432% | %SystemDrive%\Program Files (only in 64-bit version) | | %PUBLIC% | %SystemDrive%\Users\Public | | %SystemDrive% | C:\ | | %SystemRoot% | %SystemDrive%\Windows | | %windir% | %SystemDrive%\Windows | ### Import path exclusions from Trellix ENS Threat Prevention scan policies If you are using Endpoint Security Threat Prevention in your environment, you can import the list of path exclusions that are defined in the on-access scan and on-demand scan policies of Endpoint Security Threat Prevention to Trellix MOVE AntiVirus scan policies. - You installed the Trellix MOVE AntiVirus extension on the Trellix ePO - On-prem server. - You installed the Endpoint Security Threat Prevention extension on the Trellix ePO - On-prem server. - You have path exclusions list ready in the on-access scan and on-demand scan policies of Endpoint Security Threat Prevention. 1. Log on to Trellix ePO - On-prem as an administrator. 2. Select Menu → Policy → Policy Catalog, then select Endpoint Security Threat Prevention from the Product list. 3. From the Category list, select On Access Scan or On Demand Scan. > Note: > > From the on-demand scan policy, you can import only the exclusions that are defined on the Full Scan tab. 1. Next to the name of the policy where you want to import path exclusions, click Export. 1. Next to the Download file, right-click the policy name and select *Save link as...* 2. From the Save As window, browse to the location and click Save to save the xml file. 2. Select Menu → Policy → Policy Catalog, then select MOVE AntiVirus 4.10.x from the Product list. 3. From the Category list, select On Access Scan or On Demand Scan. 4. Click the name of an editable policy. 5. From Path Exclusions under the Exclusions option, click Import... to open the Import Exclusion Path dialog box. 6. Under Select the file to add exclusion path, click Choose File, then browse to the location, and select the xml file that is download from Endpoint Security Threat Prevention. > **Note** > > If you want to clear the existing exclusions, select Clear existing exclusions. 1. Click OK to import the exclusions list. You can now see that the path exclusions are imported. 2. Click Save to save the changes in the policy. ### Configure client load per SVM (Multi-platform) Depending on your environment, you can configure the load type for each SVM, which specifies the workload and activities on clients. Configure the client load for each SVM in the SVM Settings policy. The available options are: - Low (Higher number of clients) — Less file activity on clients per SVM. When clients have less file activity, SVM can handle more clients. Default number of clients is 300. - Medium (Moderate number of clients) — Medium file activity on clients per SVM. Default number of clients is 250. - High (Fewer number of clients) — More file activity on clients per SVM. When clients have more file activity, SVM can handle fewer clients. Default number of clients is 150. - Custom — Customize workload and activities for your clients. > **Tip** > > We recommend 250. Increasing this value might cause performance issues or scan delays, or both. ### Alerts for number of client connections and scan time You can configure alerts for the number of client connections and scan time per SVM. Configure the Alert me option for each SVM in the SVM Settings policy. The available options are: - When number of client connections to the SVM reaches____% — Specify the SVM capacity level (in percentage) for number of client connections. A warning appears when the number of connected clients is greater than this level. Default value is 90. - When average scan time on the SVM exceeds____seconds — Specify the SVM's average scan time (in seconds). A warning appears when the average scan time on the SVM exceeds this level. Default value is 10 seconds. ## Types of scans Scanning files for threats when the user accesses them protects against intrusions when they occur. Periodically scanning areas of your system that are most susceptible to infection ensures complete protection. Trellix MOVE AntiVirus provides two types of scans: on-access scans and on-demand scans. - **On-access scan** — Configure on-access scans to run on managed endpoints. When you access files, folders, and programs, the on-access scanner checks the operation and scans the item, based on criteria defined by the administrator. On-access scanning provides continuous and real-time detection of threats. To configure and schedule on-access scans, use the on-access scan policy settings. - **On-demand scan** — Configure and schedule on-demand scans to run on managed endpoints. This scan type examines all files or files in a specific folder on virtual machines for potential threats during the time specified. On-demand scans supplement the continuous protection of on-access scanning. You can also schedule regular scans at times that do not interfere with your work. To configure and schedule on-demand scans, use these client task settings: - Targeted On Demand Scan — Allows you to select a system or a group of systems from the System Tree to initiate the on-demand scan. - Policy-based On-Demand Scan — Schedules the predefined on-demand scans. Configure the behavior of these scans in the policy settings for on-demand scan. The Options policy includes settings that apply to all scan types. ## Trellix GTI working If you enable Trellix GTI for the on-access or on-demand scanner, the scanner uses heuristics to check for suspicious files. The scanner submits fingerprints of samples, or *hashes*, to a central database server hosted by Trellix Advanced Research Center to determine if they are malware. By submitting hashes, detection might be made available sooner than when Trellix Advanced Research Center publishes the next DAT release. You can configure the sensitivity level that Trellix GTI uses when it determines if a detected sample is malware. The higher the sensitivity level, the higher the number of malware detections. However, allowing more detections can result in more false positives. The Trellix GTI sensitivity level is set to Medium by default. Configure the sensitivity level for each scanner in the SVM Settings policy. ### Enable or disable Trellix GTI Follow the steps to enable or disable Trellix GTI and to specify the GTI timeout value. 1. Log on to Trellix ePO - On-prem. 2. Go to Policy Catalog. 3. Select MOVE AntiVirus 4.10.0 as the Product and SVM Settings as the Category. 4. Select a policy. 5. Select Show Advanced. 6. Select Enable GTI and specify the GTI timeout value in seconds. The GTI timeout value ranges from 1 to 10 seconds. 7. Select Save. > Note > > You can specify the GTI timeout value only for MOVE AntiVirus Agentless. You have now enabled or disabled Trellix GTI and specified the GTI timeout value. ## Configure common scan settings To specify settings that apply to both on-access and on-demand scans, configure the MOVE AntiVirus 4.10.x → Options policy settings. The common scan settings in the policy apply to all scans: - Quarantine Manager (Multi-platform) — Specifies the quarantine location and the number of days to keep quarantined items before automatically deleting them. - Quarantine network share (Agentless) — Specifies the specified network share where the quarantined files are stored. Make sure that you have write permission to the shared folder. Trellix MOVE AntiVirus supports only Windows share path for quarantine network share. - SVM Server Communication (Multi-platform) — Specifies the scan server port for communicating with the client system. - SVM Assignment (Multi-platform) - Assign SVM using SVM Manager — Specifies the IP address of the SVM manager for assigning the SVM using SVM Manager. - Assign SVM manually — Specifies the IP address of the SVM to assign the SVM manually. 1. Log on to Trellix ePO - On-prem as an administrator. 2. Select Menu → Policy → Policy Catalog, then select MOVE AntiVirus 4.10.x from the Product list. 3. From the Category list, select Options. 4. Click the name of an editable policy. 5. Configure settings on the page, as required, then click Save. ## On-access scanning The on-access scanner examines files on the computer as the user accesses them, and provides continuous, real-time detection of threats. ## On-access scanning (Multi-platform) The on-access scanner integrates with the system at the lowest levels (file system filter driver) and scans files where they first enter the system. ![Flowchart diagram of the on-access scanning process showing decision diamonds and arrows. The diagram illustrates steps such as: the on-access scanner examines the file at the client system, checks local cache, checks for publisher trust, checks global cache in the SVM, sends the file to ATD for analysis if required, compares the file to known malware signatures in the DAT, determines whether it is malware, and then either allows access or sends the file nature as malware to the client system where the configured action is taken.](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/trellix_move_antivirus_4.10.x_product_guide_8-5-2026_page_0037_img_01.png?sv=2026-02-06&spr=https&st=2026-11-20T14%3A35%3A02Z&se=2026-11-20T15%3A35%3A02Z&sr=c&sp=r&sig=sIjyJXQieKv0TSjVTFoHqeM1S9ODklQ0KvdrMPT4aVg%3D) The on-access scanner delivers notifications to the System Service interface when detections occur. When an attempt is made to access or modify a file, the scanner intercepts the operation and takes these actions. 1. Examines the file at the client system. 2. Checks if any exclusion is defined in the policy. If any exclusion is defined for the file, the access is allowed. 3. If an exclusion is not defined, the scanner checks whether the file is present in local cache in the client system. If it is present, access is allowed. 4. If the file is not present in local cache, the scanner checks for publisher trust in the client system. If it matches, the access is allowed. 5. If the publisher trust does not match, the scanner checks for the file in global cache in the SVM. If the file is present, the access is allowed. 6. If the file is not present in global cache, the scanner compares the information in the file to the known malware signatures in the currently loaded DAT files. - If the file is clean, the result is cached and the read, write, or rename operation is granted. Trellix MOVE AntiVirus caches the result in the SVM and client system. - If the file contains a threat, the scanner sends the file nature as malware to the client systems, where the configured action is taken. ### On-access scanning with TIE and Intelligent Sandbox enabled 1. On-access scanner goes through the steps 1 through 4 of How on-access scanning works. 2. If the publisher trust does not match: - The client looks for the reputation in global cache in the SVM. If the reputation is available, the access is allowed based on the Shared Cloud Solutions policy assigned to the system. - If the reputation is not available in global cache in the SVM, the client sends the file hashes to the SVM for TIE lookup. - The SVM checks the reputation cache for the file hash. If the file hash is found, the SVM gets the reputation data from the SVM cache and sends the reputation to the client and the action is taken. - (SVM is connected to TIE) If the file hash is not found in the SVM cache and TIE server does not have the reputation: - (Intelligent Sandbox is present) If the policy on the endpoint determines that the file must be sent to Intelligent Sandbox, the server sends the file for further analysis. To send the file to Intelligent Sandbox, these requirements must be met: - Advanced Threat Defense (ATD) option is configured in the Shared Cloud Solutions policy on the Trellix ePO - On-prem server. - Size of the file is less than 10 MB - The TIE server returns the file hash's reputation to the SVM once the data is received from Intelligent Sandbox after analyzing the file. 1. Trellix MOVE AntiVirus takes action based on the Shared Cloud Solutions policy assigned to the system that is running the file. 2. The SVM sends threat details as threat events to Trellix ePO - On-prem. #### Changing when files are scanned You can change the client policy to determine which files are scanned for threats and when. By default, files are scanned when they are read from or written to disk, or when opened for backup. The Trellix Agent program files and the User Profile Manager process are excluded from scans. When files are written to disk, the on-access scanner examines these files: - Incoming files written to the local drive. - Files (new, changed, or files copied or moved from one drive to another) created on the local drive or a mapped network drive (if enabled with Multi-platform). When files are read from disk, the scanner examines these files: - Outgoing files read from the local drive or mapped network drives (if enabled with Multi-platform). - Files trying to execute a process on the local drive. - Files opened on the local drive. > Caution > > Depending on your environment, selecting On network drives can degrade network performance. ## On-access scanning (Agentless) The on-access scanner integrates with the system at the lowest levels (file system filter driver) and scans files where they first enter the system. ![Flowchart of the on-access scanner decision process showing a start node, decision diamonds labeled Checks if any exclusion is defined in the policy?, Checks if present in local cache in the client system?, and Checks if present in global cache in the SVM?, arrows for Yes leading to Access is allowed, and a path for No leading to a process box The scanner compares the file to the known malware signatures in the loaded DAT.](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/trellix_move_antivirus_4.10.x_product_guide_8-5-2026_page_0040_img_01.png?sv=2026-02-06&spr=https&st=2026-11-20T14%3A35%3A02Z&se=2026-11-20T15%3A35%3A02Z&sr=c&sp=r&sig=sIjyJXQieKv0TSjVTFoHqeM1S9ODklQ0KvdrMPT4aVg%3D) The on-access scanner delivers notifications to the System Service interface when detections occur. When an attempt is made to access or modify a file, the scanner intercepts the operation and takes these actions. 1. Examines the file at the client system. 2. Checks if any exclusion is defined in the policy. If any exclusion is defined for the file, the access is allowed. 3. If an exclusion is not defined, the scanner checks whether the file is present in local cache in the client system. If it is present, access is allowed. 4. The scanner checks for the file in global cache in the SVM. If the file is present, the access is allowed. 5. If the file is not present in global cache, the scanner compares the information in the file to the known malware signatures in the currently loaded DAT files. - If the file is clean, the result is cached and the read, write, or rename operation is granted. Trellix MOVE AntiVirus caches the result in the SVM as part of global cache and client system as part of local cache. - If the file contains a threat, the scanner sends the file nature as malware to the client systems, where the configured action is taken. ### Changing when files are scanned You can change the client policy to determine which files are scanned for threats and when. By default, files are scanned when they are read from or written to disk, or when opened for backup. The Trellix Agent program files and the User Profile Manager process are excluded from scans. When files are written to disk, the on-access scanner examines these files: - Incoming files written to the local drive. - Files (new, changed, or files copied or moved from one drive to another) created on the local drive. When files are read from disk, the scanner examines these files: - Outgoing files read from the local drive. - Files trying to execute a process on the local drive. - Files opened on the local drive. ## Configure on-access scan policy settings These settings enable and configure on-access scanning, which includes specifying messages to send when a threat is detected and different settings based on process type. 1. Log on to Trellix ePO - On-prem as an administrator. 2. Select Menu → Policy → Policy Catalog, then select MOVE AntiVirus 4.10.x from the Products list. 3. Select On-Access Scan. 4. Click Edit for the name of an editable policy. Policy Catalog page opens. 5. Click Show Advanced. 6. Select Enable On-Access Scan to enable the on-access scanner and modify options. 7. Configure these settings: | **Options** | **Actions** | | --- | --- | | On-access Scan | Under Scan, select any combination of: - When writing to disk - When reading from disk - On network drives - Opened for backup (Multi-platform only) - Case-sensitivity Enabled on this machine (applicable for Trellix MOVE AntiVirus 4.9.1 and above versions) > **Caution** > > Depending on your environment, selecting On network drives can degrade network performance. The supported file systems for Linux client system are ext2, ext3, ext4, btrfs, cifs, vfat, ISO9660, xfs, and nfs. | | File types to scan | - **All files** — Select to scan all files. - **Default + Additional files (Multi-platform only)** — Select to scan the default file types or any additional file types. You can add, edit, and remove additional file types, which are included for scanning. By default, this option is selected. - **Following only** — Select to specify a list of file extensions to scan. You can add, edit, and remove file extensions that are included for scanning. Wildcards are supported, and exact matches are required. Do not include the period when specifying extensions. **Note:** Archive and MIME-encoded files are not scanned by default. This behavior is changed by modifying the SVM Settings policy. For more information about how to use wildcards when creating exclusions in VirusScan Enterprise or Trellix MOVE AntiVirus, see Trellix KnowledgeBase article [KB54812](https://support.trellix.com/s/article/KB54812). | | Exclusions | #### Path Exclusions Add them to the Path Exclusions list. The Trellix MOVE AntiVirus product allows you to fine-tune the list of file types scanned including individual files, folders, and disks. You might need these exclusions because the scanners might scan and lock a file when that file is being used by a database or server. This might cause the database or server to fail or generate errors. When specifying the exclusions: - Wildcards are supported for path exclusions. - (Multi-platform only) Windows system variables are supported, see [System variables](/data-and-email/docs/move-antivirus-4-10-x-product-guide#) for the list of supported system variables. > **Note:** > > (Agentless only) System variables are not supported. | | | Using the Import option, you can browse to and select the exclusion rule file and add path exclusions. You can import exclusions from an on-access scan policy of Trellix ENS that has exclusions defined in it. You can refer to Import path exclusions from Endpoint Security Threat [Prevention scan policies](/data-and-email/docs/move-antivirus-4-10-x-product-guide#) for more information. > **Note:** > > A path exclusion entry *.log is available, so that the log files on the endpoints are not scanned. This improves the scanning performance of the client system. --- #### Process Exclusions (Multi-Platform only) Add them to the Process Exclusions list. The Trellix MOVE AntiVirus product allows you to fine-tune the list of process types scanned including processes. You might need these exclusions because the scanners might scan and lock a process when that process is being used by a database or server. This might cause the database or server to fail or generate errors. > **Note:** > > Wildcards are not supported for process exclusions. --- #### Publisher Exclusions (Multi-Platform only) You can choose to trust the authenticated and signed files from different publishers, so that the scanning performance improves by optimized use of resources at the SVM by sending fewer files for scanning from the endpoints. Here are the portable executable extensions that are excluded with this option: .cpl, .exe, .dll, .ocx, .sys, .scr, .drv, .efi, .fon - Certificate revocation check — This is used for the Windows Publisher Trust feature. You can configure the certificate revocation check with these options: - none — Trellix MOVE AntiVirus does not do certificate revocation check. - for end Certificate locally — Trellix MOVE AntiVirus checks whether the end certificate of the file is valid or has it being revoked. This is checked from the Windows CRL (local cache) that is maintained by Windows locally. - for full certificate chain locally — Trellix MOVE AntiVirus checks the complete chain of certificate for a particular digitally signed file against the Windows CRL (local cache) that is maintained by Windows locally. - for end certificate locally as well as by getting CRL from the issuing CA — Trellix MOVE AntiVirus checks against the Windows CRL (local cache) that is maintained by Windows locally and also checks against the issuing CA's (certificate authority) CRL that is done over network. **Note:** When Windows Verify Trust (WVT) is enabled, the files digitally signed by Microsoft and Trellix are excluded from scanning. Currently there are 29 certificates (22 from Microsoft, 6 from Trellix and 1 from VeriSign) supported by the WVT feature. These certificates are selected and excluded from scanning based on the high probability usage. If the hash value of a file is not part of any of these 29 certificates, the file is sent for scanning, though the WVT feature is enabled. | 1. For the Actions options, configure Threat detection primary response. Make sure that you select a primary action and a secondary action. Available primary actions: > Note > > (Agentless only) If no quarantine policy is configured, the Delete files automatically and quarantine action does not occur even if it is configured as the primary action. Available secondary action: - Delete files automatically and quarantine — Once the threat is detected, it deletes and quarantines the threat to the specified location. - Delete files automatically — Once the threat is detected, it deletes the threat. - Deny access to files — Prevents the user from accessing the file. - Deny access to files — Prevents the user from accessing the file. 2. Click Save to store the policy. # On-demand scanning The on-demand scanner examines the client systems for potential threats at regular intervals or at convenient times. Use on-demand scans to supplement the continuous protection of the on-access scanner, such as to scan latent and inactive processes. You can also schedule regular scans at times that do not interfere with your work. ## On-demand scans (Multi-platform) The on-demand scanner searches files, folders, and registry for any malware that might have infected the computer. You decide when and how often the on-demand scans occur. You can scan at a scheduled time or at startup. The on-demand scanner intercepts the operation and takes these actions: 1. Examines the file at the client system. 2. Checks if any exclusion is defined in the policy. If any exclusion is defined for the file, the access is allowed. 3. If an exclusion is not defined, the scanner checks whether the file is present in local cache in the client system. If it is present, access is allowed. 4. If the file is not present in local cache, the scanner checks for publisher trust in the client system. If it matches, the access is allowed. 5. If the publisher trust does not match, the scanner checks for the file in global cache in the SVM. If the file is present, the access is allowed. 6. If the file is not present in global cache, the scanner compares the information in the file to the known malware signatures in the currently loaded DAT files. For example, if the action is configured to Delete files automatically and quarantine (the default setting), the scanner: - If the file is clean, the result is cached and the read, write, or rename operation is granted. Trellix MOVE AntiVirus caches the result in the SVM and the client system. - If the file contains a threat, the scanner sends the file nature as malware to the client systems, where the configured action is taken. - Deletes items that are detected as threats and saves copies in a non-executable format to the Quarantine folder. - Records the results in the activity log. - Notifies the user that it detected a threat in the file, and includes the item name and the action taken. 7. If the file doesn't meet the scanning requirements, the scanner doesn't check it. The scanner continues until all data is scanned. The on-demand scan detection list is cleared when the next on-demand scan starts. 1. On-demand scanner goes through the steps 1 through 4 of How on-demand scanning works. 2. If the publisher trust does not match: - The client looks for the reputation in global cache in the SVM. If the reputation is available, the access is allowed based on the Shared Cloud Solutions policy assigned to the system. - If the reputation is not available in global cache in the SVM, the client sends the file hashes to the SVM for TIE lookup. - The SVM checks the reputation cache for the file hash. If the file hash is found, the SVM gets the reputation data from the SVM cache and sends the reputation to the client and the action is taken. - (SVM is connected to TIE) If the file hash is not found in the SVM cache and TIE server does not have the reputation: - (Intelligent Sandbox is present) If the policy on the endpoint determines that the file must be sent to Intelligent Sandbox, the server sends the file for further analysis. To send the file to Intelligent Sandbox, these requirements must be met: - Advanced Threat Defense (ATD) option is configured in the Shared Cloud Solutions policy on the Trellix ePO - On-prem server. - Size of the file is less than 10 MB - The TIE server returns the file hash's reputation to the SVM once the data is received from Intelligent Sandbox after analyzing the file. 1. Trellix MOVE AntiVirus takes action based on the Shared Cloud Solutions policy assigned to the system that is running the file. 2. The SVM sends threat details as threat events to Trellix ePO - On-prem. ### Optimizing the scanning performance on systems To minimize the impact that on-demand scans have on a system, specify performance options when configuring these scans. [**On-demand scans summary**](/data-and-email/docs/move-antivirus-4-10-x-product-guide#) ODS Summary feature is helpful in tracking ODS happening on the Trellix MOVE AntiVirus Multi-platform environment. You can track ODS details from Client, SVM, and Trellix ePO - On-prem (Queries and Reports). For more information see, Trellix ePO - On-prem features leveraged by Trellix MOVE AntiVirus . The ODS summaries on the clients are: **MP Clients: Information** | **Parameters** | **Description** | | --- | --- | | ODS State | The state (started, in progress or stopped) of scan. | | ODS start time | The time when the scan started. | | ODS End time | The time when the scan stopped. | | No. of Files Trusted by Publisher Check | The number of files passed during the certificate entry scan. | | No. of Local Cache Hit | The number of files got missed during the scan. | | No. of SVM Cache Hit | The number of files got missed during the scan from SVM side. | | No. of Files Excluded by Path | The number of files excluded during the scan. | | No of clean files found in SVM Scanning | The number of files found clean from SVM scan. | | No. of Scan Timeout | The number of files got timed out during the configured time scan. | | No. of Files Infected | The number of detected files found during the scan. | | SVM IP Address | The IP address. | | ODS Termination Reason | Reason for ODS fail. | | AMCore Engine Version | The AMCore engine version. | | AMCore Content Version | The AMCore content version. | --- **View ODS stats on Client/SVM side** **Client side** Shows the scan status (Running/Not Running) in percentage. Run `mvadm status` command to view ODS current state (Running/Not Running). If ODS is running, this command shows the completion status in percentage. ![Console output of mvadm status showing scan configuration enabled; On Access Scan: Enabled; On Demand Scan: Enabled; On Demand Scan State: Running [3.98 % : Finished](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/trellix_move_antivirus_4.10.x_product_guide_8-5-2026_page_0050_img_01.png?sv=2026-02-06&spr=https&st=2026-11-20T14%3A35%3A02Z&se=2026-11-20T15%3A35%3A02Z&sr=c&sp=r&sig=sIjyJXQieKv0TSjVTFoHqeM1S9ODklQ0KvdrMPT4aVg%3D) Driver Status: Driver is loaded; Primary Server: (masked address) [Active]; Secondary Server: NONE:9053 [Not Configured]; SVA Manager: NONE:8080 [Not Configured]; Protection Status: Enabled] **SVM side** Shows the list of connected clients, total number of connected clients, clients running TODS and ODS. Run mvadm stats ods command to get list of connected clients, clients running ODS, and clients running TODS. ![Console output of mvadm stats ods showing a table titled List of Connected Clients with masked IP addresses, Number of connected clients : value, Target On Demand Scan table with columns Agent GUID and IP Address and masked entries, and Scheduled On Demand Scan: NULL](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/trellix_move_antivirus_4.10.x_product_guide_8-5-2026_page_0050_img_02.png?sv=2026-02-06&spr=https&st=2026-11-20T14%3A35%3A02Z&se=2026-11-20T15%3A35%3A02Z&sr=c&sp=r&sig=sIjyJXQieKv0TSjVTFoHqeM1S9ODklQ0KvdrMPT4aVg%3D) > Note > > If scheduled ODS is running on clients, it displays the output in same format as TODS else NULL. ## On-demand scans logging A new log level ODSLOG is defined on client side to get the detailed logging when ODS is running. It creates separate empty log file ods.log on starting the service. The detail logging information is available only if you enable `loglevel == ODSLOG` in command prompt, else only ODS summary is displayed on the Trellix ePO - On-prem. The ODS related logging summary is part of ods.log file. Define separate log level on client side (ODSLOG): - When ODS/TODS starts on MOVE client side, log ODS related logging in separate file (ods.log). - Print ODS summary in case ODS starts, end, stop in ods.log file. - Keep log rotation and configurable file size same as existing `mvagent.log` file. ## On-demand scans (Agentless) The on-demand scanner searches files, folders, and registry for any malware that might have infected the computer. You decide when and how often the on-demand scans occur. You can scan at a scheduled time or at startup. The on-demand scanner intercepts the operation and takes these actions: 1. Examines the file at the client system. 2. Checks if any exclusion is defined in the policy. If any exclusion is defined for the file, the access is allowed. 3. If an exclusion is not defined, the scanner checks whether the file is present in local cache in the client system. If it is present, access is allowed. 4. The scanner checks for the file in global cache in the SVM. If the file is present, the access is allowed. 5. If the file is not present in global cache, the scanner compares the information in the file to the known malware signatures in the currently loaded DAT files. - If the file is clean, the result is cached and the read, write, or rename operation is granted. Trellix MOVE AntiVirus caches the result in the SVM as part of global cache and the client system as part of local cache. - If the file contains a threat, the scanner sends the file nature as malware to the client systems, where the configured action is taken. For example, if the action is configured to Delete files automatically and quarantine (the default setting), the scanner: - Deletes items that are detected as threats and saves copies in a non-executable format to the Quarantine folder. - Records the results in the activity log. 1. If the file doesn't meet the scanning requirements, the scanner doesn't check it. The scanner continues until all data is scanned. The on-demand scan detection list is cleared when the next on-demand scan starts. ### Optimizing the scanning performance on systems To minimize the impact that on-demand scans have on a system, specify performance options when configuring these scans. ## Enable and configure on-demand scans You can modify the on-demand scan policy to enable system on-demand scans, and to determine the schedule and frequency of scans. You installed the Trellix MOVE AntiVirus extension on the Trellix ePO - On-prem server. By default, on-demand scans are not enabled. Other scan settings (for example, exclusions) are inherited from the client scan policy. 1. Log on to Trellix ePO - On-prem as an administrator. 2. Select Menu → Policy → Policy Catalog, then select MOVE AntiVirus 4.10.x from the Products list. 3. Select On Demand Scan. 4. Click Edit for the name of an editable policy. Policy Catalog page opens. 1. Click Show Advanced. 2. Configure these settings: | **Options** | **Actions** | | --- | --- | | On-demand Scan | - Select Enable on-demand scan. - Select Case-sensitivity Enabled on this machine (applicable for Trellix MOVE AntiVirus 4.9.1 and above versions). - Specify maximum time for each file scan ___ seconds — Enter the appropriate Run scheduled scan every ___ days — Enter the appropriate amount for your environment. We recommend 45. - Run on-demand scan for every ___ days — Enter the appropriate amount for your environment. We recommend 7. - On-demand scan will stop after ___ minutes — The amount of time to wait for a scan to complete, in minutes. Defaults to 150 minutes. This is the duration for which a Trellix MOVE AntiVirus Agent waits for scan response of a file from the SVM. Typically, file scans are fast. However, file scans might take longer time due to large file size, file type, or heavy load on the SVM. In case, the file scan takes longer than the scan timeout limit, the file access is allowed and a scan timeout event is generated. - Cache scan results for files smaller than ___ MB (Multi-platform only) — Set the maximum file size (in MB) up to which scan results must be cached. Defaults to 40 MB. Files smaller than this threshold are copied completely to the SVM and scanned. If the file is found to be clean, its scan result is cached based on its SHA-1 checksum for faster future access. Files larger than this size threshold are transferred in chunks that are requested by the SVM and scanned. | | **File Types to Scan** | - All files — Select to scan all files. By default, this option is selected. - Default + Additional files (Multi-platform only) — Select to scan the default file types or any additional file types. You can add, edit, and remove additional file types, which are included for scanning. - Following only — Select to specify a list of file extensions to scan. You can add, edit, and remove file extensions that are included for scanning. Wildcards are supported, and exact matches are required. Do not include the period when specifying extensions. > **Note:** > > Archive and MIME-encoded files are not scanned by default. This behavior is changed by modifying the SVM Settings policy. For more information about how to use wildcards when creating exclusions in VirusScan Enterprise or Trellix MOVE AntiVirus, see Trellix KnowledgeBase article [KB54812](https://support.trellix.com/s/article/KB54812). | | Path Exclusions | **Add them to the Path Exclusions list.** **Excluding scan items —** The Trellix MOVE AntiVirus product allows you to fine-tune the list of file types scanned including individual files, folders, and disks. You might need these exclusions because the scanners might scan and lock a file when that file is being used by a database or server. This might cause the database or server to fail or generate errors. When specifying the exclusions: - Wildcards are supported. - (Multi-platform only) Windows system variables are supported, see *System variables* for the list of supported system variables. > **Note:** > > (Agentless only) System variables are not supported. Using the Import option, you can browse to and select the exclusion rule file and add path exclusions. > **Note:** > > A path exclusion entry *.log is available, so that the log files on the endpoints are not scanned. This improves the scanning performance of the client system. | 7. Click Save to store the policy. ## On-demand scan events and log details Trellix MOVE AntiVirus generates alerts for on-demand scans. You can view the ODS statuses and event logs on Trellix ePO - On-prem and client systems. The log files for on-demand and on-access scans are available in the installation directory. Under loglevel, an ODS module is introduced that allows the Trellix MOVE AntiVirus to record the logs. To enable ODS logging, run the command: `mvadm loglevel enable ODS ALL`. In the client log file, you can search for terms like **ODS: start scan** and **ODS: scan complete** to find the status on-demand scan. (Multi-platform only) You can also view the ODS status from the local system's Windows Event Log on the client system. (Event: On-Demand Scan Started on winvistax64mp.moveauto.com using engine version 5600.1067 and dat version 7203.0000) Trellix MOVE AntiVirus generates alerts for on-demand scans. These alerts can be displayed in any of these locations: - The local system's Windows Event Log - The Trellix ePO - On-prem Threat Event Log - The local system as a Trellix notification area pop-up menu ### Server on-demand scan events (Multi-platform) | **Event ID** | **Event message** | | --- | --- | | 36984 | On-demand scan started. | | 36985 | On-demand scan completed. | | 36986 | On-demand scan terminated. Scan time limit reached. | | 36987 | On-demand scan terminated. Scan disabled in policy. | | 36988 | On-demand scan terminated. Exceeded maximum number of concurrent scans. | | 36989 | High on-demand scan terminated. Scan failure on client. | | 36990 | High on-demand scan terminated. Unexpected termination. | | 37009 | Threat detected. | | 37014 | On-demand scan events summary report. | **Server on-demand scan events (Agentless)** | **Event ID** | **Event message** | | --- | --- | | 37055 | On-demand scan started. | | 37056 | On-demand scan completed. | | 37057 | On-demand scan found malware. | | 37058 | On-demand scan failed to start. | | 37059 | On-demand scan terminated. Scan time limit reached. | | 37060 | On-demand scan terminated. Scan target powered off. | | 37061 | On-demand scan terminated. Scan disabled in policy. | | 37062 | On-demand scan resumed. | | 37076 | Malware detected and successfully deleted. | ## Targeted on-demand scans The targeted on-demand scan feature allows the administrator to select a system or a group of systems where to initiate the on-demand scan. When the admin initiates the targeted on-demand scan on the client system, Trellix Agent schedules the client task on the client system. The SVM picks the client task, then runs the scan on the client system, depending on the slot availability for the scan. Trellix Agent monitor shows the status such as TODSTask becomes active, TODSTask is successful, and TODSTask is finished, but this is not the actual on-demand scan status. You can view the on-demand scan status and event logs on Trellix ePO - On-prem and client systems. The SVM runs the specified maximum concurrent targeted on-demand scans per SVM defined by the administrator. When the SVM has reached the maximum number of targeted on-demand scans, the recently initiated on-demand scan runs later when the targeted on-demand scan slot is available. **Example 1** Consider a scenario where: - Restrict number of on-demand scans to____per SVM is set as 2 - Restrict number of targeted on-demand scans to____per SVM is set as 2 - No on-demand scan is running currently - Two targeted on-demand scans are running currently With these assumptions, if you configure one more targeted on-demand scan, the newly scheduled targeted on-demand scan starts when one of the existing targeted on-demand scans finishes. **Example 2** Consider a scenario where: - Restrict number of on-demand scans to____per SVM is set as 2 - Restrict number of targeted on-demand scans to____per SVM is set as 2 - One or two on-demand scans are running currently - Two targeted on-demand scans are running currently With these assumptions, if you configure one more targeted on-demand scan, the newly scheduled targeted on-demand scan starts when one of the existing targeted on-demand scans finishes. [Configure targeted on-demand scans](/data-and-email/docs/move-antivirus-4-10-x-product-guide#) Change the SVM Settings policy to enable on-demand scanning, and to set the concurrent scan value as needed. You installed the Trellix MOVE AntiVirus extension on the Trellix ePO - On-prem server. By default, on-demand scans are disabled. Other scan settings (for example, exclusions) are inherited from the client on-demand scan policy. 1. Log on to Trellix ePO - On-prem as an administrator. 2. Select Menu → Policy → Policy Catalog, then from the Product list select MOVE AntiVirus 4.10.0. 3. From the Category list, select SVM Settings. 4. Click the name of an editable policy. 5. Under Concurrent on-demand scans, configure these settings, then click Save. | To do this... | Do this... | | --- | --- | | Restrict number of targeted on-demand scans to____per SVM | Enter the appropriate value for your environment. > **Note:** > > The default value is 1 . Increasing this value reduces the performance. | ## Create and run targeted on-demand scan Select a system or a group of systems from the System Tree and initiate the targeted on-demand scan. - You installed the Trellix MOVE AntiVirus extension on the Trellix ePO - On-prem server. - You enabled the Enable on-demand scan option in the On Demand Scan policy. - You configured Restrict number of targeted on-demand scans to____per SVM in the SVM Settings policy. - A new ODS does not start if an ODS is currently running on the targeted system. 1. Log on to the Trellix ePO - On-prem server as an administrator. 2. Select Menu → Systems → System Tree. 3. Select the VMs you want to run the targeted on-demand scan. 4. Click Actions → MOVE → Targeted ODS. > **Note** > > (For Agentless) If any target VM is turned off, Trellix ePO - On-prem sends the task once the VM is turned on, then SVM initiates the scan. 1. On the Schedule page, schedule the task, then click Next. 2. On the Summary page, review the task details and click Save to run the on-demand scan. ## Create and run targeted on-demand scan client task (Multi-platform) Select a system or a group of systems from the System Tree and assign a client task to initiate the targeted on-demand scan. - You installed the Trellix MOVE AntiVirus extension on the Trellix ePO - On-prem server. - You enabled the Enable on-demand scan option in the On Demand Scan policy. - You configured Restrict number of targeted on-demand scans to____per SVM in the SVM Settings policy. - A new on-demand scan does not start if the on-demand scan is already running on the targeted system. 1. Log on to the Trellix ePO - On-prem server as an administrator. 2. Select Menu → Policy → Client Task Catalog. 3. From Client Task Types, select MOVE AntiVirus 4.10.x → Targeted On-Demand Scan [Multi-Platform]. 4. Click the name of an existing client task or click New Task, then confirm the task type. 5. Configure the Task Name and Description on each tab. Also provide Folder Path (Optional), then click Save. 6. Click Assign, specify the servers where you want to assign the task, then click OK. 7. Click Schedule to schedule the task. ## Configure deferred scan settings (Multi-platform) The deferred scan feature optimizes file scanning for files where the previous scan timed out because of large file size, file structure, or file composition. You installed the Trellix MOVE AntiVirus extension on the Trellix ePO - On-prem server. When the previous on-access scan timed out, scanning for a file starts again with an increased or new timeout, depending on the file size. You can configure this timeout value and the file size using the Trellix ePO - On-prem server. For an on-demand scan, the scanning for a file starts according to the timeout based on file size value specified in the deferred scan policy. 1. Log on to Trellix ePO - On-prem as an administrator. 2. Select Menu → Policy → Policy Catalog, select MOVE AntiVirus 4.10.x from the Product drop-down list, then select On-Access Scan or On-Demand Scan from the Category drop-down list. 3. Click New Policy or click the name of an existing policy to edit it. 4. Type a name for the new policy (for example, **MOVE AV Scan Policy**), then click OK. 5. Under Deferred Scan (Multi-Platform only), select Enable on-access deferred scan or Enable on-demand deferred scan and configure these file size ranges and scan timeout values, then click Save. | **File size range** | **Scan timeout** | | --- | --- | | > 40 MB and ≤200 MB | 480 seconds | | > 200 MB and ≤4096 MB | 900 seconds | | > 4096 MB and greater | 1800 seconds | ## Client notifications for deferred scans If the deferred scanning is incomplete after reaching the maximum timeout, access to the file is allowed. These client notifications appear to the user on the client system for successful on-access scanning or scan timeouts: - Deferred scan completed for file . File is safe to access. - Deferred scan is in progress for file . (A thread in svchost.exe process took 45 seconds for scanning. Hence, access denied.) - Deferred scan is timed out for file . Hence, access allowed. - Deferred scan failed for file due to some internal error. Hence, access denied. - Deferred scan failed for file . Hence, access denied. - Access Denied: Deferred scan is in progress for file . - Deferred scan completed for file . File is not accessible. - Deferred scan completed for file . File is deleted. > **Note** > > The client notifications do not appear for on-demand scan. ## Identify frequently scanned items from Trellix ePO - On-prem (Agentless) Select an SVM or a group of SVMs from the System Tree and assign a client task to calculate and display frequently scanned files, extensions, and VMs. You can include these results in the path exclusion policies to exclude them from being scanned. You installed the Trellix MOVE AntiVirus extension on the Trellix ePO - On-prem server. 1. Log on to Trellix ePO - On‑prem as an administrator. 2. Select Menu → Policy → Client Task Catalog. 3. From Client Task Types, select MOVE AntiVirus 4.10.x → Scan Diagnostics [Agentless]. 4. Click the name of an existing client task or click New Task and confirm the task type. 5. Configure these settings on each tab, then click Save. - Task Name — Specifies a unique name for the task. - Description — Specifies a description about the task. - Diagnosis Time — Specifies a description about the task. 6. Click Assign, specify the SVM where you want to assign the task, then click OK. 7. Click Schedule to schedule the task. At the end of specified minutes, the Trellix ePO - On‑prem completes the analysis and displays the results. The default allowed time limit is 10 minutes. 8. Select Menu → Reporting → Queries & Reports, then select MOVE AntiVirus 4.10.x [Agentless] under Trellix Groups to view and run these scan diagnostic queries: - MOVE AntiVirus: Top 10 Scanned File Extensions for each SVM — Lists the top 10 file extensions scanned by the SVM. - MOVE AntiVirus: Top 10 Scanned Files for each SVM — Lists the top 10 files scanned by the SVM. - MOVE AntiVirus: Top 10 Scanned Virtual Machines for each SVM — Lists the top 10 virtual machines that are sending maximum scan and checksum requests. # Identify frequently scanned items from command line (Agentless) Use the scan diagnostic command-line tool to calculate and display frequently scanned files, extensions, and VMs, on a system running the Agentless software. You can include these results in the path exclusion policies to exclude them from being scanned. - Make sure that the user is a root user, or has sudo permissions. - The name of the VM is resolved only when the vCenter is successfully registered in the SVM Settings policy using Trellix ePO - On‑prem. Otherwise, only the VM ID appears. Access the command line interface (CLI) of the SVM to create and display this report. This diagnostic tool captures these details: - Top 10 file scan requests. - Top 10 file extensions. - Top 10 virtual machines that are sending scan and checksum requests. 1. To identify the frequently scanned files, run the command: ```plaintext >cd /opt/McAfee/move/bin>sudo ./scan_diagnostic or sudo /opt/McAfee/move/bin/scan_diagnostic. ``` These parameters are available: | **Option** | **Definition** | | --- | --- | | `--help` | Shows how to use the command and its options. | | `--time arg` | Specifies the time period, in seconds, set for calculating the frequently scanned files. For example, 60 seconds. | | `--elements arg` | Specifies the number of entries to be captured and displayed in the result. | | `--path arg` | Specifies the output folder path. The default path is /opt/McAfee/move/log. | At the end of specified minutes, the tool completes the analysis and displays the results. The default allowed time limit is 1 minute. --- ![Terminal window showing MOVE scan_diagnostic output listing frequently scanned files, top frequently scanned VMs, and top file extensions in a black console window](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/trellix_move_antivirus_4.10.x_product_guide_8-5-2026_page_0064_img_01.png?sv=2026-02-06&spr=https&st=2026-11-20T14%3A35%3A02Z&se=2026-11-20T15%3A35%3A02Z&sr=c&sp=r&sig=sIjyJXQieKv0TSjVTFoHqeM1S9ODklQ0KvdrMPT4aVg%3D) 2. (Optional) Change the time limit by editing the svaconfig.xml file located at /opt/McAfee/move/etc/. **Note** To stop the scan diagnostic tool while it is collecting the data, use the Ctrl+C keys. # Identify frequently scanned items from Trellix ePO - On-prem (Multi-platform) Select one or a group of SVMs from the System Tree and assign a client task to calculate and display frequently scanned files, extensions, processes, and VMs. You can include these results in the path exclusion policies to exclude them from being scanned. You installed the Trellix MOVE AntiVirus extension on the Trellix ePO - On-prem server. 1. Log on to Trellix ePO - On-prem as an administrator. 2. Select Menu → Policy → Client Task Catalog. 3. From MOVE AntiVirus 4.10.x under Client Task Types, select Scan Diagnostics [Multi-Platform]. 4. Click the name of an existing client task or click New Task, then confirm the task type. 5. Configure these settings on each tab, then click Save. - Task Name — Specifies a unique user-friendly name for the task. - Description — Specifies some user-friendly description about the task. - Diagnosis Time — Specifies the time period, in minutes, set for calculating the frequently scanned files. for example 1-10 minutes. 1. Click Assign, select one SVM or a group of SVMs where you want to assign the task, then click OK. 2. Click Schedule to schedule the task. At the end of specified minutes, the Trellix ePO - On-prem server completes the analysis and displays the results. The default allowed time limit is 10 minutes. 3. Select Menu → Reporting → Queries & Reports and select MOVE AntiVirus 4.10.x [Multi-Platform] under Trellix Groups to view and run these scan diagnostic queries: - MOVE AntiVirus: Top 10 Scanned File Extensions for each SVM — Lists the top 10 file extensions scanned by the SVM. - MOVE AntiVirus: Top 10 Scanned Files for each SVM — Lists the top 10 files scanned by the SVM. - MOVE AntiVirus: Top 10 Scanned Processes for each SVM — Lists the top 10 processes scanned by the SVM. - MOVE AntiVirus: Top 10 Scanned Virtual Machines for each SVM — Lists the top 10 virtual machines that are sending maximum scan and checksum requests. > Note > > This data is rolled over every 7 days. ## Identify frequently scanned items from command line (Multi-platform) The scan diagnostic tool calculates and displays frequently scanned processes, files, extensions, and VMs. You can include these files in the path and process exclusion policies. These specified files are excluded from scans when they are written by a trusted process. You must have administrator permissions to perform this task. Access the SVM command line interface (CLI) on the SVM virtual machine to create and display this report. This diagnostic tool captures these details: - Top 10 file scan requests - Top 10 file extensions - Top 10 processes - Top 10 virtual machines that are sending maximum scan and checksum requests. 1. Open the SVM CLI: click Start → Programs → McAfee → MOVE AV Server command prompt. > Note > > This command prompt has administrator rights. At this command prompt, you can type commands that activate the **mvadm** utility to perform administration tasks on the SVM. 1. To calculate the frequently scanned files, run this command: ```plaintext move_diagnose /T: