--- title: "MOVE AntiVirus 4.10.x Server Command Line Interface Reference Guide" slug: "move-antivirus-4-10-x-server-command-line-interface-reference-guide" updated: 2026-08-06T13:00:25Z published: 2026-08-06T13:00:25Z canonical: "docs.trellix.com/move-antivirus-4-10-x-server-command-line-interface-reference-guide" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # MOVE AntiVirus 4.10.x Server Command Line Interface Reference Guide --- Last Updated: September 17, 2023 # Server command line interface You can access the command line interface (CLI) on the SVM virtual machine to perform basic maintenance tasks. The CLI is a series of commands that you can issue to the **mvadm** utility. Each command has arguments and parameters that can be added to the command to change the command's behavior. This reference lists each command in **mvadm**, and all argument variations. ## Access the CLI During installation, a shortcut to the command line interface (CLI) for the SVM is added to the Windows Start menu. - From the Start menu, select Programs → McAfee → **MOVE AV Server Command Prompt**. > **NOTE** > > Make sure you run this command as an administrator. **RESULTS** At this command prompt, you can type commands to perform administration tasks on the SVM. > **NOTE** > > If you cannot find the shortcut to the Server CLI, then launch Command Prompt with administrative privileges and execute the commands for administrative tasks. ## cache Perform operations on the SVM scan cache. ```plaintext mvadm cache save cfilename mvadm cache load cfilename mvadm cache list mvadm cache flush mvadm cache info ``` | **Arguments** | **Description** | | --- | --- | | `save cfilename` | Save the current set of checksums from the trusted checksum cache to the file `cfilename`. | | `load cfilename` | Load the checksums from file `cfilename` to the trusted checksum cache. | Server command line interface --- | **Arguments** | **Description** | | --- | --- | | `list` | List the checksums available in the trusted checksum cache. | | `flush` | Remove all checksums from the trusted checksum cache. | | `info` | Print details of the trusted checksum cache. | ## config Display and edit the configuration settings that are applied to the current installation. ```plaintext mvadm config set NAME=VALUE mvadm config show ``` | **Arguments** | **Description** | | --- | --- | | `set NAME=VALUE` | Sets the value of the configuration argument **NAME** to **VALUE**. | | `show` | Lists the configuration settings. | | **Parameters** | **Value** | **Description** | | --- | --- | --- | | **ComputeCksum** | 0 (server) or 1 (client). Default = 1. | Determines whether to use the server-computed checksum of the file or the checksum sent by the client. | | **ConnTimeout** | A positive integer value. Default = 0 (no timeout). | Sets the connection timeout in milliseconds. | | **GTILevel** | Between 0 (disabled) and 5 (Very High). Default = 1 (Very Low). | Sets the Global Threat Intelligence level. | | **IntegrityEnabled** | 0 (off) or 1 (on). Default = 1. | Enables or disables the Self-Protection feature. | | **LogFileNum** | A positive integer value. Default = 4. | Limits the number of log files allowed before they are overwritten. | | **LogFileSize** | An integer greater than 1024. Default = 2048. | Limits the size (in KB) of an individual log file. | | **MaxCacheItems** | A positive integer value. Default = 1,000,000. | Limits the number of items that can exist in the cache. | | **NumThreads** | Between 0 and 500. Default = 300. | Limits the number of available scan request threads. | | **ScanArchiveFiles** | 0 (off) or 1 (on). Default = 0. | Enables or disables scanning inside archive files. | | **ScanPUPS** | 0 (off) or 1 (on). Default = 0. | Enables or disables checking for potentially unwanted programs (PUPs). Scan behavior is determined by VirusScan Enterprise settings. | | **ServerPort1** | Between 1024 and 65535. Default = 9053. | Determines the port where the server listens for client requests. | | **SVMManagerAddress** | An IPv4 address or FQDN. No default. | Specifies the IPv4 address or FQDN of the SVM Manager. | | **SVMManagerPort** | Between 1024 and 65535. Default = 8080. | Specifies the port used to communicate with SVM Manager. | | **RAMDiskEnabled** | 1 (0x1) | Enables or disables the RAM disk option. | | **MaxNumClients** | 250 (0xf4240) | Maximum number of clients that can be connected to the SVM. | | **OSSGUID** | `<GUID>` | Unique GUID required to register SVM to SVM Manager. | ## help Display usage information for the **mvadm** utility. ```plaintext mvadm help mvadm help command ``` | **Arguments** | **Description** | | --- | --- | | default | Lists the summary description for the SVM CLI commands. | | command | Lists the detailed Help for the provided command. | ## loglevel View and edit the log level of the SVM modules. ```plaintext mvadm loglevel mvadm loglevel enable {MODULE_NAME | ALL} {TYPES... | ALL} mvadm loglevel disable {MODULE_NAME | ALL} {TYPES... | ALL} ``` | **Arguments** | **Description** | | --- | --- | | default | Lists the current log level of each module in the SVM. Use this form to get a full list of modules for use with the other forms of the **loglevel** command. | | enable {MODULE_NAME \| ALL} {TYPES... \| ALL} | Sets the log level for module **MODULE_NAME** or all modules to the specified log level types or to all types. | | disable {MODULE_NAME \| ALL} {TYPES... \| ALL} | Clears the specified log level types or all types for **MODULE_NAME** or for all modules. | These are the supported log level types: - Error - Warning - Info - Debug - Warning - System - Info - Detail - Fnentry - Fnexit ## **stats** Display the current statistics of the SVM. ```plaintext mvadm stats ``` | **Arguments** | **Description** | | --- | --- | | `default` | Displays current usage and performance statistics for the SVM. The statistics are collected in real time, and the displayed data is a snapshot of the information at the time the command was invoked. The full list of reported statistics is shown in the example output. | ### Example 1. Example output ```plaintext C:\>mvadm stats Total number of cksum req:                       13125 Total number of file transfer req:               11825 Total number of smart file req:                     14 Total number of scans on RAM disk:               11825 Cksum cache hit:                                  1300 Total av scan req:                               11825 Total av scan failure:                               0 Data recv failure:                                   0 Resp send failure:                                   0 Total scan threads:                                300 Total heart beat threads:                            0 Total idle threads:                                300 Number of requests in queue:                         0 Number of items in cache:                            0 Avg request process time:                     0.045183 sec Avg request wait time:                        0.000000 sec Number of frequently modified files scanned:       848 Data saved for frequently modified files:           98% Maximum entries for frequently modified files:      25 Total Tie Requests:                              95486 Total Tie File Reputation Requests:              90622 Total Tie Cert Reputation Requests:                 36 Total ATD candidates:                              851 Total ATD successful submissions:                   76 Total Tie Cache Hits:                             4712 Total Tie Certificate Cache Hits:                  116 Total Tie File Reputation change events:           140 Total Tie Certificate reputation change events:      0 Total Tie Certificate hashes in Global cache:       34 Total Tie File hashes in Global cache:           46827 Tie Avg Response Time per Request:            0.370643 sec ``` --- ### **On-demand scan stats** Display the information related to On-demand scan on SVM. ```plaintext mvadm stats ods ``` | **Arguments** | **Description** | | --- | --- | | List of Connected Clients | IP address list of connected Multi-platform clients . | | Number of connected Clients | Number of connected Multi-platform clients. | | Target On Demand Scan | Multi-platform client GUID and IP address of system currently running TODS. | | Scheduled On Demand Scan | Multi-platform client GUID and IP address of system currently running Scheduled on demand. | Example 2. Example The output of the `mvadm stats ods` command from one SVM where 6 clients are connected and on one of client TODS is running: ![Black console screenshot showing the output of mvadm stats ods. The console image displays a List of Connected Clients table with an IP Address column and several masked IP entries, a line reading Number of connected clients : 6, a Target On Demand Scan two-column table with headers Agent GUID and IP Address and masked values, and a line Scheduled On Demand Scan: NULL.](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/move-antivirus-4.10.x-server-command-line-interface-reference-guide_page_0007_img_01.png?sv=2026-02-06&spr=https&st=2026-11-19T21%3A16%3A01Z&se=2026-11-19T22%3A16%3A01Z&sr=c&sp=r&sig=zJYyIm1TUsPdgdyARyVqrrzPlnC60DtpuHW2BwADv3Y%3D) ## version Display the version of the SVM application installed on the server VM. ```plaintext mvadm version ``` | **Arguments** | **Description** | | --- | --- | | `default` | Displays the version number of the SVM. This is useful for verifying if an update has completed successfully, or checking if an update is needed. | ## cert Using the `cert` command, you can view, add, or remove certificates from the Certificate policy. | **Arguments** | **Description** | | --- | --- | | `mvadm cert` | View the existing certificates | | `mvadm cert add <certificate name>` | Add certificate name to the Certificates policy. | | `mvadm cert remove <certificate name>` | Remove certificate from the Certificates policy. | ## On-demand scan for individual folders Use this command to run on-demand scan for individual folders. | **Argument** | **Description** | | --- | --- | | `mvadm tods path` | Run on-demand scan on the specific folder. | **Example:** To run on-demand scan on the folder `C:\Windows`, run the command `mvadm tods path C:\Windows\`