--- title: "Option definitions — General settings" slug: "option-definitions-general-settings-2" tags: ["Product Usage", "DLP 11.13.x"] updated: 2026-09-01T07:28:51Z published: 2026-09-01T07:28:51Z canonical: "docs.trellix.com/option-definitions-general-settings-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Option definitions — General settings The **General** settings available from **Common Appliance Management ** includes commonly used settings. **Option definitions** | Option | Definition | | --- | --- | | **Apply Policy** | By default, **Allow Policy Push** is enabled. Deselecting **Allow Policy Push** doesn't apply the configuration or policy changes you have made and this allows you to review the changes. After reviewing the configuration or policy changes, select **Allow Policy Push**. | | **Date and Time** | Options for setting the date and time for your appliances: - **Time zone** — The default time zone is **UTC**. - **Enable NTP** — Enables your appliances to synchronize time with the NTP servers you define. Use the ![GUID-3F0CB1B9-B84D-4E0B-AD10-4C36AC527A2C-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-fe630315-d1b9-dd2e-9c62-fcfa43aa2d90(1).png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A40%3A41Z&se=2026-11-22T15%3A40%3A41Z&sr=c&sp=r&sig=fcHNPIlTd02WFpwv1weSOR7a6uR%2B7fo7oRh2Zkqut6Y%3D) add and ![GUID-2F39264E-27F7-4361-8148-379335E1FB1C-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-cde48b36-8f7a-9420-2f31-a8b6076e38de.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A40%3A41Z&se=2026-11-22T15%3A40%3A41Z&sr=c&sp=r&sig=fcHNPIlTd02WFpwv1weSOR7a6uR%2B7fo7oRh2Zkqut6Y%3D) delete icons to add or remove NTP servers from the list. Use the ![GUID-3543D770-9E27-4BC3-8264-5A05C2930F68-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-088e4c63-8415-4f58-2a38-d146eeaec0cd.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A40%3A41Z&se=2026-11-22T15%3A40%3A41Z&sr=c&sp=r&sig=fcHNPIlTd02WFpwv1weSOR7a6uR%2B7fo7oRh2Zkqut6Y%3D) move up and ![GUID-BBF35E0E-3913-4BC6-BEFB-58D072597CDE-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-0e4673f5-2f5b-9fc2-742c-a2737b09a0e4.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A40%3A41Z&se=2026-11-22T15%3A40%3A41Z&sr=c&sp=r&sig=fcHNPIlTd02WFpwv1weSOR7a6uR%2B7fo7oRh2Zkqut6Y%3D) move down icons to arrange the servers in your preferred order. > [!NOTE] > Note > > If you **Enable NTP**, you cannot save the **General** policy until you have configured at least one NTP server. Define each NTP server by entering the IP address or domain name for the server. | | **DNS** | Define the DNS servers to be used by your appliances. > [!NOTE] > Note > > Until you apply DNS server information to your appliances or clusters, those appliances use the default DNS information provided by DHCP on your network. Use the ![GUID-3F0CB1B9-B84D-4E0B-AD10-4C36AC527A2C-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-fe630315-d1b9-dd2e-9c62-fcfa43aa2d90(1).png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A40%3A41Z&se=2026-11-22T15%3A40%3A41Z&sr=c&sp=r&sig=fcHNPIlTd02WFpwv1weSOR7a6uR%2B7fo7oRh2Zkqut6Y%3D) add and ![GUID-2F39264E-27F7-4361-8148-379335E1FB1C-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-cde48b36-8f7a-9420-2f31-a8b6076e38de.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A40%3A41Z&se=2026-11-22T15%3A40%3A41Z&sr=c&sp=r&sig=fcHNPIlTd02WFpwv1weSOR7a6uR%2B7fo7oRh2Zkqut6Y%3D) delete icons to add or remove DNS Servers from the list. Use the ![GUID-3543D770-9E27-4BC3-8264-5A05C2930F68-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-088e4c63-8415-4f58-2a38-d146eeaec0cd.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A40%3A41Z&se=2026-11-22T15%3A40%3A41Z&sr=c&sp=r&sig=fcHNPIlTd02WFpwv1weSOR7a6uR%2B7fo7oRh2Zkqut6Y%3D) move up and ![GUID-BBF35E0E-3913-4BC6-BEFB-58D072597CDE-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-0e4673f5-2f5b-9fc2-742c-a2737b09a0e4.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A40%3A41Z&se=2026-11-22T15%3A40%3A41Z&sr=c&sp=r&sig=fcHNPIlTd02WFpwv1weSOR7a6uR%2B7fo7oRh2Zkqut6Y%3D) move down icons to arrange the host servers in your preferred order. Define the IP address for each DNS server. > [!NOTE] > Note > > You cannot save the **General** policy until you have configured at least one DNS server. | | **Static Routing** | Manually define the routing options available to your appliances. Use the ![GUID-3F0CB1B9-B84D-4E0B-AD10-4C36AC527A2C-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-fe630315-d1b9-dd2e-9c62-fcfa43aa2d90(1).png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A40%3A41Z&se=2026-11-22T15%3A40%3A41Z&sr=c&sp=r&sig=fcHNPIlTd02WFpwv1weSOR7a6uR%2B7fo7oRh2Zkqut6Y%3D) add and ![GUID-2F39264E-27F7-4361-8148-379335E1FB1C-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-cde48b36-8f7a-9420-2f31-a8b6076e38de.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A40%3A41Z&se=2026-11-22T15%3A40%3A41Z&sr=c&sp=r&sig=fcHNPIlTd02WFpwv1weSOR7a6uR%2B7fo7oRh2Zkqut6Y%3D) delete icons to add or remove host information from the list. Use the ![GUID-3543D770-9E27-4BC3-8264-5A05C2930F68-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-088e4c63-8415-4f58-2a38-d146eeaec0cd.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A40%3A41Z&se=2026-11-22T15%3A40%3A41Z&sr=c&sp=r&sig=fcHNPIlTd02WFpwv1weSOR7a6uR%2B7fo7oRh2Zkqut6Y%3D) move up and ![GUID-BBF35E0E-3913-4BC6-BEFB-58D072597CDE-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-0e4673f5-2f5b-9fc2-742c-a2737b09a0e4.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A40%3A41Z&se=2026-11-22T15%3A40%3A41Z&sr=c&sp=r&sig=fcHNPIlTd02WFpwv1weSOR7a6uR%2B7fo7oRh2Zkqut6Y%3D) move down icons to arrange the routing information in your preferred order. Define the Subnet and Gateway addresses for each route. | | **SSH** | Define the Secure Shell (SSH) access settings for your appliances. Select your required option from the drop-down list: - **Don't allow remote login**. - **Allow remote login for all hosts**. - **Allow remote login for these hosts only**. Selecting **Allow remote login for these hosts only** enables the **Hosts** table, allowing you to define the hosts that accept remote login using SSH. Use the ![GUID-3F0CB1B9-B84D-4E0B-AD10-4C36AC527A2C-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-fe630315-d1b9-dd2e-9c62-fcfa43aa2d90(1).png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A40%3A41Z&se=2026-11-22T15%3A40%3A41Z&sr=c&sp=r&sig=fcHNPIlTd02WFpwv1weSOR7a6uR%2B7fo7oRh2Zkqut6Y%3D) add and ![GUID-2F39264E-27F7-4361-8148-379335E1FB1C-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-cde48b36-8f7a-9420-2f31-a8b6076e38de.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A40%3A41Z&se=2026-11-22T15%3A40%3A41Z&sr=c&sp=r&sig=fcHNPIlTd02WFpwv1weSOR7a6uR%2B7fo7oRh2Zkqut6Y%3D) delete icons to add or remove host information from the list. Use the ![GUID-3543D770-9E27-4BC3-8264-5A05C2930F68-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-088e4c63-8415-4f58-2a38-d146eeaec0cd.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A40%3A41Z&se=2026-11-22T15%3A40%3A41Z&sr=c&sp=r&sig=fcHNPIlTd02WFpwv1weSOR7a6uR%2B7fo7oRh2Zkqut6Y%3D) move up and ![GUID-BBF35E0E-3913-4BC6-BEFB-58D072597CDE-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-0e4673f5-2f5b-9fc2-742c-a2737b09a0e4.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A40%3A41Z&se=2026-11-22T15%3A40%3A41Z&sr=c&sp=r&sig=fcHNPIlTd02WFpwv1weSOR7a6uR%2B7fo7oRh2Zkqut6Y%3D) move down icons to arrange the host systems in your preferred order. The SSH host information can be host names with wildcards (for example, `*.domain.name`), or IP addresses with subnet masks. > [!NOTE] > Note > > If you select **Allow remote login for these hosts only**, you cannot save the **General** policy until you have configured at least one SSH host. | | **Logging** | By default, your appliances each store their own log information locally. To configure the appliances to remotely store their syslog information, select **Store log data remotely** and define the syslog servers to use. Use the ![GUID-3F0CB1B9-B84D-4E0B-AD10-4C36AC527A2C-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-fe630315-d1b9-dd2e-9c62-fcfa43aa2d90(1).png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A40%3A41Z&se=2026-11-22T15%3A40%3A41Z&sr=c&sp=r&sig=fcHNPIlTd02WFpwv1weSOR7a6uR%2B7fo7oRh2Zkqut6Y%3D) add and ![GUID-2F39264E-27F7-4361-8148-379335E1FB1C-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-cde48b36-8f7a-9420-2f31-a8b6076e38de.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A40%3A41Z&se=2026-11-22T15%3A40%3A41Z&sr=c&sp=r&sig=fcHNPIlTd02WFpwv1weSOR7a6uR%2B7fo7oRh2Zkqut6Y%3D) delete icons to add or remove syslog servers from the list. Use the ![GUID-3543D770-9E27-4BC3-8264-5A05C2930F68-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-088e4c63-8415-4f58-2a38-d146eeaec0cd.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A40%3A41Z&se=2026-11-22T15%3A40%3A41Z&sr=c&sp=r&sig=fcHNPIlTd02WFpwv1weSOR7a6uR%2B7fo7oRh2Zkqut6Y%3D) move up and ![GUID-BBF35E0E-3913-4BC6-BEFB-58D072597CDE-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-0e4673f5-2f5b-9fc2-742c-a2737b09a0e4.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A40%3A41Z&se=2026-11-22T15%3A40%3A41Z&sr=c&sp=r&sig=fcHNPIlTd02WFpwv1weSOR7a6uR%2B7fo7oRh2Zkqut6Y%3D) move down icons to arrange the servers in your preferred order. Define each syslog server by specifying the **Protocol** (either **TCP** or **UDP**), the domain name or IP address for the **Syslog Server**, and the **Port** to use. The default value for the **Protocol** is **TCP**, with the default **Port** being **514**. > [!NOTE] > Note > > If you select **Store log data remotely**, you cannot save the **General** policy until you have configured at least one syslog server. | > [!NOTE] > Note > > To edit an entry in any of the tables on this page, first select the entry, then click the ![GUID-5BF45FAB-7B87-4870-BC86-0CC8B7439750-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-19abea4e-1798-25ac-c128-bbdf4784dbf1.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A40%3A41Z&se=2026-11-22T15%3A40%3A41Z&sr=c&sp=r&sig=fcHNPIlTd02WFpwv1weSOR7a6uR%2B7fo7oRh2Zkqut6Y%3D) edit pencil icon.