--- title: "Perform emergency boot" slug: "perform-emergency-boot-1" updated: 2026-09-12T18:55:31Z published: 2026-09-12T18:55:31Z canonical: "docs.trellix.com/perform-emergency-boot-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Perform emergency boot You can perform the emergency boot when a Drive Encryption Trellix Drive Encryption - SaaS installed system fails to boot or when the Drive EncryptionTrellix Drive Encryption - SaaS logon page is corrupt. Make sure that you have: - The DETech (Standalone) boot disk - The USB memory stick containing the recovery information file (.xml) - The daily authorization code ### Note Users with a valid support contract with Trellix can obtain the daily authorization code from **Trellix** Support. In Windows, an emergency boot does not affect data on the drive until the next policy enforcement occurs. For this reason, it is not necessary to create a sector level backup of the disk during emergency booting. 1. Restart the unrecoverable system using the DETech (Standalone) boot disk to load the **Trellix DETech** interface. 2. Enter the daily authorization code, then confirm the authorization status. 3. Click **Enable USB** under **Actions**. The **Trellix DETech** dialog box displays the **USB enabled** message. 4. Click **OK** to close the dialog box. 5. You might need to select the **Select Boot Disk** option to specify which drive DETech tries to boot from. This depends on the implementation of the BIOS. 6. Click **File** under **Authentication**, then browse and select the **Recovery Information File (.xml)** from the USB memory stick, then click **OK**. The **Authentication** status changes to **Authenticated with File**. Or Authenticate with the **Token**, then confirm that the authentication status changes to **Authenticated with Token**. 7. Under **Actions**, click **Emergency Boot**. 8. When prompted for confirmation, click **OK**. ### Note - When the system boots into Windows, if there is a network connection to the ePO - On-prem ePO - SaaS server, the system synchronizes with ePO - On-prem ePO - SaaS and fully repairs itself by rebuilding the PBFS and re-synchronizing all data from the server. To confirm this right-click **Trellix Agent Tray**, then click **Quick Settings** | **Drive Encryption status** - If the Trellix Agent is unable to establish a connection with the ePO - On-prem ePO - SaaS server, continue to use the **DETech Emergency Boot** option to boot the system until a connection to the server is made. 9. When prompted to confirm your operating system type, - If you are booting Windows XP, click **Yes.** - If you are booting to Windows Vista or a later version of Window, click **No.** ### Note - When the system boots into Windows, if there is a network connection to the ePO - On-prem ePO - SaaS server, the system synchronizes with ePO - On-prem ePO - SaaS and fully repairs itself by rebuilding the PBFS and re-synchronizing all data from the server. To confirm this right-click **Trellix Agent Tray**, then click **Quick Settings** | **Drive Encryption status** - If the Trellix Agent is unable to establish a connection with the ePO - On-prem ePO - SaaS server, continue to use the **DETech Emergency Boot** option to boot the system until a connection to the server is made. :