--- title: "Perform scan operations" slug: "perform-scan-operations" tags: ["Product Usage", "DLP 11.12.x"] updated: 2026-09-09T08:05:32Z published: 2026-09-09T08:05:32Z canonical: "docs.trellix.com/perform-scan-operations" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Perform scan operations Manage and view information about configured scans. For details about product features, usage, and best practices, click ? or Help. > [!NOTE] > Note > > Applying policy starts any scans that are scheduled to run immediately. Scans that are currently running are not affected. 1. In ePO - On-prem, select **Menu** → **Data Protection** → **DLP Discover**. 2. Click the **Scan Operations** tab. The tab displays information about configured scans, such as the name, type, state, and overview of the results. 3. To update the configuration for all scans, click **Apply policy**. 4. To apply a filter to the scan list, select a filter from the **Filter** drop-down list. 5. To enable or disable a scan: 1. Select the checkbox for the scans you want to enable or disable. The icon in the **State** column shows if the scan is enabled or disabled. - **Solid blue icon** — Enabled - **Blue and white icon** — Disabled 2. Select **Actions** → **Change State**, then select **Enabled** or **Disabled**. 3. Click **Apply policy**. 6. To change the running state of the scan, click the start, pause, or stop buttons in the **Commands** column. > [!NOTE] > Note > > The availability of these options depends on the scan state and if the scan is running or inactive. 7. To clone, delete, or edit a scan: 1. Select the checkbox for the scan. 2. Select **Actions**, then select **Clone Scan**, **Delete Scan**, or **Edit Scan**. > [!NOTE] > Note > > To modify the Discover server assigned to the scan, you must disable the scan. You cannot modify the scan type assigned to a scan. To change the type, clone the scan. 8. To refresh the tab, select **Actions** → **Synchronize Data**.