--- title: "Power redundancy" slug: "power-redundancy-1" tags: ["Hardware", "DLPNP 11.10.x", "DLPNP 11.11.x"] updated: 2026-09-02T05:55:57Z published: 2026-09-02T05:55:57Z canonical: "docs.trellix.com/power-redundancy-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Power redundancy Trellix DLP Network hardware appliance ships with more than one power supply and must be configured to provide redundancy while operating at nominal power. Use two electrical outlets that are on different circuit breakers to achieve additional protection. Trellix DLP 8800, Trellix DLP 7700, and Trellix DLP 6600 appliance models use cold redundancy. One power supply operates for a period of time, then the other takes over. During the transition time, both power supplies operate. If one power supply fails, an alarm sounds and a warning indicator light illuminates. If a power supply fails, contact Trellix for a replacement unit. > [!NOTE] > Note > > The motherboard is set to **on** by default. By default, Trellix DLP 7700 and Trellix DLP 6600 appliance models automatically come back up when power is restored.