--- title: "Reimage an appliance using a USB drive" slug: "reimage-an-appliance-using-a-usb-drive-2" tags: ["DLPNM – SaaS", "SaaS", "Install and Get Started"] updated: 2026-09-01T09:27:16Z published: 2026-09-01T09:27:16Z canonical: "docs.trellix.com/reimage-an-appliance-using-a-usb-drive-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Reimage an appliance using a USB drive You can also copy the installation image onto a USB drive and reimage an appliance to the latest version. Make sure that the USB drive is made bootable. 1. Create a USB drive with the installation image. > [!NOTE] > Note > > Use image writing software, such as Launchpad Image Writer, to write the image to the USB drive. Use the "raw", "DD", or "ISOHybrid" image mode when writing to a USB drive, else the installation might fail. For more information, see [KB87321](https://thrive.trellix.com/s/article/KB87321). 2. Insert the USB drive into the appliance. 3. Log on to the appliance as administrator. 4. From the appliance console menu, select Reboot to restart the system. 5. Press **F6** to enter the boot menu. 6. From the boot menu options, select the USB drive from which the appliance must upgrade. The installation image starts loading. Wait until the image gets unpacked and displays the Installation menu. 7. From the appliance console menu, select Reboot to restart the system. 8. Select the full installation mode, which is the default and the recommended option. 9. Follow the on-screen instructions to reimage the appliance. 10. When the reimaging is complete, remove the USB drive. > [!WARNING] > Caution > > If you don't remove the USB drive, the appliance is reimaged from the USB drive after the next reboot, removing your current installation and returning the appliance to factory default settings.