--- title: "Reimage an appliance using RMM virtual media" slug: "reimage-an-appliance-using-rmm-virtual-media-3" tags: ["Install and Get Started", "DLPNP – SaaS"] updated: 2026-09-01T09:27:45Z published: 2026-09-01T09:27:45Z canonical: "docs.trellix.com/reimage-an-appliance-using-rmm-virtual-media-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Reimage an appliance using RMM virtual media You can use a system that connects to a Remote Management Module (RMM) virtual media to reimage an appliance to the latest version. - Make sure that the RMM virtual media is connected to your network. - Decide the IP address, subnet mask, and gateway IP address to use when configuring the RMM port. - Make sure Java is installed on the computer that connects to the RMM virtual media. - Locate the grant number you received after purchasing the product. 1. Download the .iso image file to the computer that connects to the RMM virtual media. 1. In a web browser, go to [https://www.trellix.com/en-us/downloads.html](https://www.trellix.com/en-us/downloads.html). 2. Enter your grant number, then select the appropriate product and version. 3. In the **Software Downloads** tab, select, and save the appropriate *.iso file. 2. Log on to the appliance as administrator. 3. From the appliance console menu, select **Reboot** to restart the system. 4. On the computer that connects to the RMM virtual media, open a web browser and enter: `https://<RMM IP address>` Use the administrator account credentials. 5. Select the .iso file and follow these instructions to reimage. **Applicable to Trellix DLP 8800 appliance** **Applicable to Trellix DLP 7700 appliance** > [!WARNING] > Caution > > If you don't unplug the ISO, the appliance gets reimaged after the next reboot, removing your current installation and returning the appliance to factory default. **Applicable to Trellix DLP 6600 appliance** > [!WARNING] > Caution > > If you don't disable ISO, the appliance gets reimaged after the next reboot, removing your current installation and returning the appliance to factory default. 1. Click the **Remote Control** tab. 2. In the **Remote Console Preview** section, **HTML5** is enabled by default, click to open the remote console. 3. Click **Virtual Media**, which is located on the right-hand side. A pop-up window appears. 4. In the **Device1** tab, select **ISO Image** from the **Select Device Type** menu. Browse to select the ISO image by clicking the **Select File** button. 5. Click the **Mount** button. The appliance is reimaged using the .iso file. Wait for the installation to complete. 1. On the **Remote Control** tab, click **Launch Console**. 2. On the **Virtual Media** tab, select **Virtual Storage**. The **Virtual Storage ** pane opens. 3. In the **Device1** tab, select **ISO File** from the **Logical Drive Type** menu. Browse to select the ISO image by clicking the **Open Image** button. 4. Click the **Plug in** button and click **OK**. 5. On the **Power Control** tab, select **Power reset**. The appliance is reimaged using the .iso file. Wait for the installation to complete. 6. Go to back to **Virtual Media** → **Virtual Storage** and select the **Device1** tab. 7. Click **Unplug** and click **OK**. 1. On the **Remote Control** tab, click **Launch Console**. 2. On the **Device** tab, select **Redirect ISO** and browse to the .iso file. 3. On the **Remote Control** tab, select **Server Power Control** → **Power Cycle Server**. The appliance is reimaged using the .iso file. Wait for the installation to complete. 4. On the **Device** tab, disable **Redirect ISO**. 6. From the appliance console menu, select **Reboot** to restart the system. 7. Select the full installation mode, which is the default and the recommended option. 8. Follow the on-screen instructions to reimage the appliance and configure the appliance from the Setup Wizard.