--- title: "Reimage an appliance using RMM virtual media" slug: "reimage-an-appliance-using-rmm-virtual-media" tags: ["Install and Get Started", "DLPNP 11.11.x"] updated: 2026-09-01T07:30:39Z published: 2026-09-01T07:30:39Z canonical: "docs.trellix.com/reimage-an-appliance-using-rmm-virtual-media" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Reimage an appliance using RMM virtual media You can use a system that connects to a Remote Management Module (RMM) virtual media to reimage an appliance to the latest version. - Make sure that the RMM virtual media is connected to your network. - Decide the IP address, subnet mask, and gateway IP address to use when configuring the RMM port. - Make sure Java is installed on the computer that connects to the RMM virtual media. - Locate the grant number you received after purchasing the product. 1. Download the Trellix DLP Network Prevent .iso image file to the computer that connects to the RMM virtual media. 1. In a web browser, go to [https://www.trellix.com/en-us/downloads.html](https://www.trellix.com/en-us/downloads.html). 2. Enter your grant number, then select the appropriate product and version. 3. In the **Software Downloads** tab, select, and save the appropriate *.iso file. 2. Log on to the appliance as administrator. 3. From the appliance console menu, select **Reboot** to restart the system. 4. On the computer that connects to the RMM virtual media, open a web browser and enter: `https://<RMM IP address>` Use the administrator account credentials. 5. Select the .iso file and follow these instructions to reimage. **Applicable to Trellix DLP 8800 appliance** **Applicable to Trellix DLP 7700 appliance** > [!WARNING] > Caution > > If you don't unplug the ISO, the appliance gets reimaged after the next reboot, removing your current installation and returning the appliance to factory default. **Applicable to Trellix DLP 6600 appliance** > [!WARNING] > Caution > > If you don't disable ISO, the appliance gets reimaged after the next reboot, removing your current installation and returning the appliance to factory default. 1. Click the **Remote Control** tab. 2. In the **Remote Console Preview** section, **HTML5** is enabled by default, click to open the remote console. 3. Click **Virtual Media**, which is located on the right-hand side. A pop-up window appears. 4. In the **Device1** tab, select **ISO Image** from the **Select Device Type** menu. Browse to select the ISO image by clicking the **Select File** button. 5. Click the **Mount** button. The appliance is reimaged using the .iso file. Wait for the installation to complete. 1. On the **Remote Control** tab, click **Launch Console**. 2. On the **Virtual Media** tab, select **Virtual Storage**. The **Virtual Storage ** pane opens. 3. In the **Device1** tab, select **ISO File** from the **Logical Drive Type** menu. Browse to select the ISO image by clicking the **Open Image** button. 4. Click the **Plug in** button and click **OK**. 5. On the **Power Control** tab, select **Power reset**. The appliance is reimaged using the .iso file. Wait for the installation to complete. 6. Go to back to **Virtual Media** → **Virtual Storage** and select the **Device1** tab. 7. Click **Unplug** and click **OK**. 1. On the **Remote Control** tab, click **Launch Console**. 2. On the **Device** tab, select **Redirect ISO** and browse to the .iso file. 3. On the **Remote Control** tab, select **Server Power Control** → **Power Cycle Server**. The appliance is reimaged using the .iso file. Wait for the installation to complete. 4. On the **Device** tab, disable **Redirect ISO**. 6. From the appliance console menu, select **Reboot** to restart the system. 7. Select the full installation mode, which is the default and the recommended option. 8. Follow the on-screen instructions to reimage the appliance and configure the appliance from the Setup Wizard.