--- title: "Restore the Master Boot Record" slug: "restore-the-master-boot-record" updated: 2026-09-12T18:55:31Z published: 2026-09-12T18:55:31Z canonical: "docs.trellix.com/restore-the-master-boot-record" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Restore the Master Boot Record The Master Boot Record (MBR) is the first sector of the boot disk. It is the part of the hard drive that tells the operating system what to boot and where to boot from. Make sure that you have: - The DETech WinPE boot disk - The USB memory stick containing the recovery information file (**.xml**); this must be inserted before booting from the WinPE boot disk - A system authorized with the authorization code When Drive Encryption activates, a backup of the Windows MBR is sent to the server for use in recovery scenarios. This backup can be exported from ePO - On-prem in the **Recovery Information file (.xml)**. This feature allows you to deactivate Drive Encryption on a manually decrypted boot disk by restoring the Windows MBR (preserving the in-situ partition table) to the disk. Do not use this feature on secondary (non-boot) disks. ### Caution This feature should only be used on a boot disk where the data is not encrypted. Performing this operation on an encrypted boot disk renders the system non-bootable. 1. Make a sector level backup of the drive being processed. 2. Manually decrypt the disk using the **Crypt Sectors** feature. 3. Boot the system with the **DETech WinPE Recovery CD/DVD** to load the **Drive Encryption** interface. 4. At the command prompt, enter these commands to open the **DETech** window: **`cd\`** **`cd Program Files\Drive Encryption `** **`EETech.exe`** or **`EEOpalTech.exe`** 5. Enter the daily authorization code, then confirm the authorization status. 6. If necessary, click **Set Boot Disk**, then select the required boot disk. 7. Authenticate with a **Token** or **Recovery Information File (.xml)**, then confirm the authentication status. 8. Under **Disk Operations**, click **Restore MBR**. 9. In the **Restore MBR** dialog box, select the MBR that you want to use for the restore operation (**Original MBR** or **Drive Encryption MBR**, then click **OK**. You can select or deselect the **Keep the current Partition Table** as needed. 10. When prompted to confirm that you want to overwrite the MBR, click **OK**. If you select **Original MBR**, the MBR is replaced with the one that was present on the disk before Drive Encryption was activated. :