--- title: "Select client system disks for encryption" slug: "select-client-system-disks-for-encryption" updated: 2026-09-12T18:55:31Z published: 2026-09-12T18:55:31Z canonical: "docs.trellix.com/select-client-system-disks-for-encryption" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Select client system disks for encryption To encrypt the target disk on your client system, you need to select the required encryption type and set the encryption priority from the Product Setting policy available with the Drive Encryption product. You must have administrator rights to perform this task. Task 1. Click Menu → Systems → System Tree, then select a group from the **System Tree**. 2. Select a system, then click Actions → Agent → Modify Policies on a Single System. The **Policy Assignment** page for that system appears. 3. From the **Product** drop-down list, select **Drive Encryption 8.x**. The policy categories under **Drive Encryption** display the system's assigned policy. 4. Select the **Product Settings** policy category, then click **Edit Assignments** to open the **Product Settings** page. 5. If the policy is inherited, select **Break inheritance and assign the policy and settings below** next to **Inherit from**. 6. Select the policy from the **Assigned policy** drop-down list, then click **Edit Policy** to open the **Policy Settings** page. From this location, you can edit the selected policy or create a new policy. 7. On the **Encryption** tab, select the disks to be encrypted. For the Self-Encrypting (Opal) drives, select PC Opal with **All disks** or **Boot only**. The **Encryption type** options such as **None**, **All disks except boot disk**, and **Selected partitions** are not applicable to Self-Encrypting (Opal) drives. ### Note To initiate the encryption on the client, the user must select any one of the options other than **None**. The default option, **None**, does not initiate the encryption. 8. On the **Policy Settings** page, click **Save**, then click **Save** on the **Product Settings** page. 9. Send an agent wake-up call. :